Gladkovsky S.V. Veselova V.E. Vichuzhanin D.I. Zichenkov M.Ch. Dubinskii S.V. Kovalev N.I. Kulemin A.V. Kovalev I.E. Effect of Heat-Treatment Conditions on the Microstructure and the Static Fracture Toughness of an α + β VT23 Titanium Alloy // Russian Metallurgy (Metally). 2023. V. 2023. No. 4. З. 425-432. [10.1134/S0036029523040092].   Salikhyanov D.R. Michurov N.S. The concept of microsimulation of processes of joining dissimilar materials by plastic deformation // Обработка металлов (технология, оборудование, инструменты). 2023. V. 25. No. 3. P. 36–49. [10.17212/1994-6309-2023-25.3-36-49].   Smirnov S.V. Myasnikova M.V. Pestov A.V. Konovalov D.A. Smirnova (Yekzemplyarova) E.O. A New Method for Adhesion Strength Assessment of Indented Polymer Coatings // Physical Mesomechanics. 2023. V. 26. No. 5. P. 514-522. [10.1134/S1029959923050041].   Gushina N.V. Ovchinnikov V.V. Shalomov K.V. Vichuzhanin D.I. Effect of Ion Irradiation on Resource Characteristics of the V95 Alloy (Al-Zn-Mg-Cu) // Inorganic Materials: Applied Research. 2023. Vol. 14. No. 2. P. 557-559. [10.1134/S2075113323020193].   Salikhyanov D.R. Michurov N.S. Joining of dissimilar aluminum alloys AA5154 and AA2024 by cold roll bonding // International Journal of Advanced Manufacturing Technology. 2023. V. 129 (1-2). P. 255–277. [10.1007/s00170-023-12292-2].   Salikhyanov D.R. Kamantsev I.S. Michurov N.S. Technological Shells in Rolling Processes of Thin Sheets from Hard-to-Deform Materials // Journal of Materials Engineering and Performance. 2023. [10.1007/s11665-023-07834-4].   Mushnikov A.N. Zadvorkin S.M. Vichuzhanin D.I. Soboleva N.N. Effect of Biaxial Tension on the Coercive Force of Low-Alloy Steel // Journal of Nondestructive Evaluation. 2023. V. 42. Article number 94. [10.1007/s10921-023-01012-1].   Pugacheva (Vandysheva) N.B. Kruchkov D.I. Bykova (Gurchenko) T.M. Vichuzhanin D.I. Studying the Plastic Deformation of Cu-Ti-C-B Composites in a Favorable Stress State // Materials. 2023. Vol. 16. 3204. [10.3390/ma16083204].   Salikhyanov D.R. Michurov N.S. Simulation of the rolling process of a laminated composite AMg3/D16/AMg3 // Обработка металлов (технология, оборудование, инструменты). 2023. V. 25. No. 3. P. 6–18. [10.17212/1994-6309-2023-25.3-6-18].   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and micromechanical properties of SHS composites with a copper matrix: peculiarities of formation // Frontier Materials & Technologies. 2023. № 4. P. 99 - 108. [10.18323/2782-4039-2023-4-66-9].   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Transverse Rupture Strength of Cu-Ti-C-B Composite // Procedia Structural Integrity. 2023. V. 50. P. 251-256. [10.1016/j.prostr.2023.10.048].   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Goruleva L.S. Thermophysical Properties of a Cu–Ti–C–B Shs Composite // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 3. P. 50-65. [10.17804/2410-9908.2023.3.050-065]. VAC list  Goruleva L.S. Zadvorkin S.M. Vichuzhanin D.I. Savrai R.A. Skorynina P.A. An Experimental and Computational Study of Through-Depth Strain Distribution During Frictional Treatment of a Metastable Austenitic Steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 132-144. [10.17804/2410-9908.2023.6.132-144]. Kruchkov D.I. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Deformation of Al–zn–mg–cu Composite Samples under Nonstationary Thermomechanical Conditions // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 8-25. [10.17804/2410-9908.2023.6.008-025]. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Kamantsev I.S. Studying the possibility of plastic deformation of the Ni-Fe-Cr-Ti-B-C composite // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 5. P. 15–30. [10.17804/2410-9908.2023.5.015-030]. Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Kosmachev P.V. Nedzvetsky P.D. Adhesive and impact strength of hybrid layered metal-polymer composites reinforced by basalt fiber // Letters on materials. 2022. 12 (3). P. 225-230. [10.22226/2410-3535-2022-3-225-230].   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. The Structure and Fracture Pattern of a Сu–Ti–Al–Ni–Fe–C–B Composite after Abrasive Wear // Physics of Metals and Metallography. 2022. Vol. 123. No. 10.. P. 963–970. [10.1134/S0031918X22600920].   Pugacheva (Vandysheva) N.B. Zadvorkin S.M. Michurov N.S. EBSD Analysis of an Austenitic Cr–Ni Steel Laser Weld // Physics of Metals and Metallography // Physics of Metals and Metallography. 2022. Vol. 123. No. 8. P. 791–796. [10.1134/S0031918X22080087].   Priymak E.Y. Stepanchukova A.V. Atamashkin A.S. Gladkovsky S.V. Vichuzhanin D.I. Tensile Deformation Behavior of Rotary Friction Welded Joint of Steels 32G2 and 40KhN // Metal Science and Heat Treatment. 2022. Vol. 64. P. 403–409. [10.1007/s11041-022-00821-x].   Farber V.M. Morozova A.N. Vichuzhanin D.I. Karabanalov M.S. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part 1. Bands of Localized Strain // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00815-9].   Yolshina L.A. Kvashnichev A.G. Vichuzhanin D.I. Smirnova (Yekzemplyarova) E.O. Mechanical and Thermal Properties of Aluminum Matrix Composites Reinforced by In Situ Al2O3 Nanoparticles Fabricated via Direct Chemical Reaction in Molten Salts // Applied Sciences. 2022. Vol. 12. 8907. . [10.3390/app12178907].   Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading // Composite Structures. 2022. Vol. 285. 115078 p. [10.1016/j.compstruct.2021.115078].   Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. Effect of the stress state on the adhesive strength of an epoxy-bonded assembly // Frattura ed Integrità Strutturale. 2022. Vol. 59. P. 311-325. [10.3221/IGF-ESIS.59.21].   Smirnov S.V. Konovalov D.A. Vichuzhanin D.I. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. The Effect of the Stress State, Testing Temperature, and Hardener Composition on the Strength of an AlMg5/Epoxy Metal-Polymer Joint // Materials. 2022. Vol.15. 7326. [10.3390/ma15207326].   Pugacheva (Vandysheva) N.B. Orishich A.M. Volkova E.G. Makarov A.V. Senaeva (Pugacheva) E.I. Malikov A.G. Role of Ultra-Fine Intermetallic Particles and Martensite in Strengthening of AISI 321/Cu/Ti Laser Welded Joint // Materials Characterization. 2022. Vol. 185. P.111702. [10.1016/j.matchar.2021.111702].   Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Numerical simulation of elastic-plastic deformation of AISI 321/Cu/Ti laser welded joint under tension and compression // Materials Characterization. 2022. Vol. 189. P. 111984. [10.1016/j.matchar.2022.111984].   Savrai R.A. Toporova D.V. Bykova (Gurchenko) T.M. Improving the quality of AISI H13 tool steel produced by selective laser melting // Optics and Laser Technology. 2022. V. 152. Art. 108128. [10.1016/j.optlastec.2022.108128].   Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and Properties of a SHS Cu–Ti–C–B Composite // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 43-49. [10.1134/S0031918X22010100].   Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Khudorozhkova Yu.V. Constructing a two-level computational model of cross-ply fiberglass-reinforced plastic from micromechanical testing // Polymers and Polymer Composites. 2022. Vol. 30. P. 1–13. [10.1177/09673911221112414].   Farber V.M. Morozova A.N. Khotinov V.A. Vichuzhanin D.I. Karabanalov M.S. Veretennikova (Golubkova) I.A. Lüders Deformation in Specimens Made of Normalized 09G2S Steel // Procedia Structural Integrity. 2022. Vol. 40. P. 129-135. [10.1016/j.prostr.2022.04.017].   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Character of Fracture after Cross-Bending of the SHS Composite by the Fe-Ni-Ti-C-B System // Procedia Structural Integrity. 2022. Vol. 40. P. 372-377. [10.1016/j.prostr.2022.04.050].   Smirnov S.V. Myasnikova M.V. Numeral Simulation of Damage and Fracture in Structurally Inhomogeneous Materials Subjected to Deformation // Procedia Structural Integrity. 2022. Vol. 40. P. 378-384. [10.1016/j.prostr.2022.04.051].   Osipova V.A. Gorbunova T.I. Barabanov M.A. Mekhaev A.V. Vichuzhanin D.I. Smirnov S.V. Pestov A.V. New Epoxy Resin Polymerization Catalysts Based on N,N-Dimethylaminoalkylamides of Perfl uoroalkanoic Acids // Russian Journal of Applied Chemistry. 2022. Vol. 95. No. 1. P. 53-58. [10.1134/S1070427222010074].   Farber V.M. Morozova A.N. Vichuzhanin D.I. Zhilyakov A.Yu. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part II. Deformation Zone // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00825-7].   Mushnikov A.N. Zadvorkin S.M. Perunov E.N. Vyskrebencev S.V. Izmajlov R.F. Vichuzhanin D.I. Soboleva N.N. Igumnov A.S. Experimental facility for studying the physical properties of materials in a plane stress state // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 50-60. [10.17804/2410-9908.2022.4.050-060]. Pugacheva (Vandysheva) N.B. Polyakov P.A. The effect of boron on the protective properties of aluminide coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 25–34. [10.17804/2410-9908.2022.6.025-034]. Struzhanov V.V. On one model of deformation in laminated composites // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 16–24. [10.17804/2410-9908.2022.1.016-024]. Nikolin Yu.V. Vichuzhanin D.I. Pugacheva (Vandysheva) N.B. Mezin F.I. Studying the adhesion strength of plasma powder metal coatings on the surface of graphite // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 23–39. [10.17804/2410-9908.2022.5.023-039]. Struzhanov V.V. Chaikin A.E. Destruction of a protective pipe coating under cyclic loading by internal pressure // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 2. P. 55– 66. [10.17804/2410-9908.2022.2.055-066]. Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Kanakin V.S. Using the Instrumented Indentation Technique to Determine Damage in Sintered Metal Matrix Composites after High-Temperature Deformation // Applied Sciences-Basel. 2021. Vol. 11. Iss. 22. 10590. https://doi.org/10.3390/app112210590.     Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Brittle fracture resistance and damping properties of layered metal-polymer composites // Letters on Materials. 2021. Vol. 11. Iss. 3. P. 279-284. DOI: https://doi.org/10.22226/2410-3535-2021-3-279-284.     in Russian Kruchkov D.I. Smirnov S.V. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Influence of All-Round Forging under Short-Term Creep Conditions on the Structure and Mechanical Properties of the Al7075/10SiCp Composite with an Aluminum Matrix // Physics of Metals and Metallography. 2021. Vol. 122. No. 10. P. 981-990. DOI: 10.1134/S0031918X21100069.     in Russian Pugacheva (Vandysheva) N.B. Kruchkov D.I. Nesterenko A.V. Smirnov S.V. Shveikin V.P. Studying the Short-Term High-Temperature Creep in the Al–6Zn–2.5Mg–2Cu/10SiCp Aluminum Matrix Composite // Physics of Metals and Metallography. 2021. Vol. 122. No. 8. P. 782-788. DOI: 10.1134/S0031918X21080111.     in Russian Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov Aleksander Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State // Procedia Structural Integrity. 2021. Vol. 33. P. 259-264. DOI: 10.1016/j.prostr.2021.10.032.     Guzanov B.N. Pugacheva (Vandysheva) N.B. Slukin E.Yu. Bykova (Gurchenko) T.M. Technology of Obtaining Composite Conglomerate Powders for Plasma Spraying of High-Temperature Protective Coatings // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 1. P. 6-20. DOI: 10.17212/1994-6309-2021-23.1-6-20.   in Russian Pugacheva (Vandysheva) N.B. Nikolin Y. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Influence of the chemical composition of the matrix on the structure and properties of monolithic SHS composites // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 3. P. 124-138. DOI: 10.17212/1994-6309-2021-23.3-124-138.   in Russian Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Erosion Resistance of a Combined Multilayer Coating Protecting Critical Parts of Modern Gas Turbine Engines [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 6-21. DOI: 10.17804/2410-9908.2021.2.006-021.   Pugacheva (Vandysheva) N.B. Guzanov B.N. Studying the chemical and phase compositions of a chromium-nickel-manganese steel after operation at elevated temperatures in corrosive environments // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 17–30. DOI: 10.17804/2410-9908.2021.3.017-030.   Struzhanov V.V. On One Problem of Determining the Optimal Residual Stress Field [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 55-63. DOI: 10.17804/2410-9908.2021.1.055-063.   Struzhanov V.V. On the Rational Choice of the Properties of Structural Elements Constituting Unidirectional Compositions [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 45-54. DOI: 10.17804/2410-9908.2021.3.045-054.   Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.   Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Plotnikov G.N. Michurov N.S. Heat Treatment of Wear-Resistant Cast Iron at High and Low Temperatures // AIP Conference Proceedings. 2020. Vol. 2315. 050005. https://doi.org/10.1063/5.0037190.   Filippov  A.A. Fomin  V.M. Veretennikova (Golubkova) I.A. Smirnov S.V. Investigation of elastic modulus of heterogeneous materials based on epoxy resin filled with silicon dioxide nanoparticles by nanoindentation // AIP Conference Proceedings. 2020. Vol. 2310. 020094. https://doi.org/10.1063/5.0034462.   Konovalov D.A. Kozlov  A.V. Konovalov A.V. Features of the Forming of a Ring-Shaped Specimen Under Axial Compression with a Flat Die // AIP Conference Proceedings. 2020. Vol. 2315. – 020022. https://doi.org/10.1063/5.0036914.   Konovalov D.A. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. Estimating the Repeatability of Experimental Data Obtained in Scratch Testing of a Polymer Epoxy Coating // AIP Conference Proceedings. 2020. Vol. 2315. 040021. https://doi.org/10.1063/5.0036919.   Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Effect of the Laser Welding Conditions on the Chemical Composition of the AISI 321/Cu/Ti Material // AIP Conference Proceedings. 2020. Vol. 2315. 030015. https://doi.org/10.1063/5.0036864.   Smirnov S.V. Myasnikova M.V. Michurov N.S. Igumnov A.S. Numerical Simulation of the Stress-Strain State in a Polymer Coating Surface Layer Under Creep During Indentation // AIP Conference Proceedings. 2020. Vol. 2315. 020041. https://doi.org/10.1063/5.0036684.   Struzhanov V.V. Chaikin A.E. Destruction of a Thin-Walled Spherical Vessel by Internal Pressure // AIP Conference Proceedings. 2020. Vol. 2315. 020044. https://doi.org/10.1063/5.0036729.   Mironov V.I. Ogorelkov D. A. Laptev A.A. Lukashuk O.A. Impact of damping on decay time of free oscillations in metal structures // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 022027. DOI: 10.1088/1757-899X/862/2/022027.   Baraz V.R. Gerasimov S.S. Gruzdeva I.A.. Chemesova  A.V. Shveikin V.P. Ovchinnikova A.O. Veretennikova (Golubkova) I.A. The additive technology to obtain a three-dimensional model of the 81Cu-19Ni alloy // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012119. DOI: 10.1088/1757-899X/966/1/012119.   Smirnov S.V. Veretennikova (Golubkova) I.A. Konovalov D.A. Effect of nanosized oxide fillers on the adhesive strength of epoxy lacquer under scratching // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044007. doi:10.1088/1757-899X/709/4/044007.   Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Aleksandrov S.E. Formation of a narrow hard layer in the AlMg6 alloy near the contact surface after extrusion through a conical die // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033115. doi:10.1088/1757-899X/709/3/033115.   Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.   Gushchina N.V. Makhin'ko F.F. Ovchinnikov V.V. Kaigorodova L.I. Rasposienko D.Yu. Vichuzhanin D.I. Ion irradiation effect (Ar+, E = 20-40 keV) on the mechanical properties and microstructure of aluminum V95 alloy // Journal of Physics: Conference Series. 2020. Vol. 1713. 012018. doi:10.1088/1742-6596/1713/1/012018.   Pugacheva (Vandysheva) N.B. Babaylov N.A. Bykova (Gurchenko) T.M. Loginov Yu.N. The Structure, Phase Composition and Micromechanical Properties of Briquetted Aluminum // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2020. Vol. 22. No. 3. P. 82-94. DOI: 10.17212/1994-6309-2020-22.3-82-94.   in Russian Bogdanova E.A. Veretennikova (Golubkova) I.A. Investigation of sintering features of ceramic materials based on hydroxyapatite and its substituted forms // Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials. 2020. Iss. 12. P. 535-545. DOI: 10.26456/pcascnn/2020.12.535.   in Russian Pugacheva (Vandysheva) N.B. Orishich A.M. Cherepanov A.N. Senaeva (Pugacheva) E.I. Trushina E.B. Trushina. Study of the Chemical Composition and Microstructure of AISI 321/Cu/Ta/Ti Welded Joint // Physics of Metals and Metallography. 2020. Vol. 121. No. 11. P. 1112-1118. DOI: 10.1134/S0031918X20110083.   in Russian Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Zamaraev L.M. The Effect of Atmosphere Composition on the Mechanism of Destruction of a Boride Coating on the Surface of a Die Steel during Thermal Cycling // Physics of Metals and Metallography. 2020. Vol. 121. No. 6. P. 590-596. DOI: 10.1134/S0031918X20060113.   in Russian Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov  A.V. Smirnova (Yekzemplyarova) E.O. Effect of modifying dopes on the mechanical properties of epoxy coatings affected by thermocycling // Procedia Structural Integrity. 2020. Vol. 25. P. 209-213. DOI: 10.1016/j.prostr.2020.04.025.   Smirnov S.V. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Pestov  A.V. Smirnova (Yekzemplyarova) E.O. The effect of Stress State on the Adhesive Strength of a Glued Sandwich in Shear-Compression Testing // Procedia Structural Integrity. 2020. Vol. 28. P. 234-238. DOI: 10.1016/j.prostr.2020.10.029.   Pestov  A.V. Osipova V.A. Koryakova O.V. Gorbunova T.I. Smirnov S.V. Veretennikova (Golubkova) I.A. Preparation of a New Material Based on Epoxy Oligomers for Forming Corrosion-Protective Coatings // Russian Journal of Applied Chemistry. 2020. Vol. 93. P. 400-405. DOI: 10.1134/S107042722003012X.   in Russian Konovalov D.A. Veretennikova (Golubkova) I.A. Bykova (Gurchenko) T.M. Michurov N.S. Development of an Approach to Determining the Representative Volume Element of the Al/SiC Metal Matrix Composite Material Fabricated by Squeeze Casting // Russian Metallurgy. 2020. Vol. 2020. No. 7. P. 738–745. DOI: 10.1134/S0036029520070101.   in Russian Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Alexandrov S. A New Experimental Method for Determining the Thickness of Thin Surface Layers of Intensive Plastic Deformation Using Electron Backscatter Diffraction Data // Symmetry-Basel. 2020. ol. 12. Iss. 4. article 677. DOI: 10.3390/sym12040677.   Struzhanov V.V. Integro-differential equations of the second boundary value problem of linear elasticity theory. Communication 2. Inhomogeneous anisotropic body // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 1. P. 199-208. DOI: 10.14498/vsgtu1730.   in Russian Struzhanov V.V. Korkin A.V. On the solution of one problem of deformation of rod systems that does not satisfy the Hadamard conditions by the simple iteration method // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 595-603. https://doi.org/10.14498/vsgtu1787.   in Russian Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part II. Stage of Concentrated Strain // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 464-468. https://doi.org/10.1007/s11041-020-00585-2.   in Russian Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part I. Yield Plateau and the Stage of Strain Hardening // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 457-463. https://doi.org/10.1007/s11041-020-00584-3.   in Russian Kruchkov D.I. Nesterenko A.V. A review of experimental studies of creep behavior and superplasticity in a discontinuous SiC aluminum-matrix composites // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 1. P. 130–157. DOI: 10.17212/1994-6309-2020-22.2-130-157. (In Russian).   in Russian Anakhov S.V. Guzanov B.N. Matushkin A.V. Pugacheva (Vandysheva) N.B. Pykin Yu.A. Influence of Plasma Torch Design on Cutting Quality during Precision Air-Plasma Cutting of Metal // Steel in Translation. 2020. Vol. 50. No. 3. P. 159–165. DOI: 10.3103/S096709122003002X.   in Russian Gladkovsky S.V. Nedzvetsky P.D. Vichuzhanin D.I. Petrova (Kuteneva) S.V. Lepikhin S.V. Brittle Fracture Resistance and Damping Properties of a Steel-Rubber Metal-Polymer Composite [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 6-18. DOI: 10.17804/2410-9908.2020.2.006-018. Struzhanov V.V. Chaikin A.E. Determining the Moment of Destruction of Protective Coatings on Pipes and Spherical Vessels [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 6-18. DOI: 10.17804/2410-9908.2020.3.006-018. Mironov V.I. Emelyanov I.G. Vichuzhanin D.I. Zamaraev L.M. Ogorelkov D. A. Yakovlev V.V. Effect of Hydrogenation Temperature and Tensile Stress on the Parameters of the Complete Deformation Diagram for Steel 09G2S [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures.. 2020. Iss. 1. P. 24-33. DOI: 10.17804/2410-9908.2020.1.024-033. Anakhov  S.V. Guzanov  B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Matyshkin A.V. The Influence of the Constructive Features of the Plasmotron on the Quality of the Cut During Air-Plasma Cutting of Sheet Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 58-69. DOI: 10.17804/2410-9908.2020.5.058-069. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. A Study of Boriding Methods, An Analysis of the Structure and Properties of the Obtained Coatings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. Iss. 2, 2020. P. 38-60. DOI: 10.17804/2410-9908.2020.2.038-060. Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9 No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.     Khotinov V.A. Polukhina O.N. Vichuzhanin D.I. Schapov G.V. Farber V.M. Study of Luders Deformation in Ultrafine Low-Carbon Steel by the Digital Image Correlation Technique / Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-328-333.     in Russian Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Zadvorkin S.M. Putilova E. A. Kamantsev I.S. Effect of Steplike Plastic Deformation on the Mechanical Properties and the Fracture of the Bimetal Produced by Exposition Welding / Russian Metallurgy (Metally). 2019. Vol. 2019. No. 5. P. 556–564. DOI: 10.1134/S0036029519050124.     in Russian Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9. No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.     in Russian Smirnov S.V. Veretennikova (Golubkova) I.A. Fomin V.M. Filippov A.A. Brusentseva T.A. Studying the Viscoelastic Properties of an Epoxy Resin Strengthened with Silicon Dioxide Nanoparticles by Instrumented Microindentation // Mechanics of Composite Materials. 2019. Vol. 55. No. 3. P. 337-348. DOI: 10.1007/s11029-019-09816-x.     in Russian Kaigorodova L.I. Rasposienko D.Y. Pushin V.G. Pilyugin V.P. Smirnov S.V. Effect of Annealing on the Structure and Properties of the Aging Al-Li-Cu-Mg-Zr-Sc-Zn Alloy Subjected to Megaplastic Strain // Physics of Metals and Metallography. 2019. Vol. 120. No. 2. P. 157–163. DOI: 10.1134/S0031918X19020066.     in Russian Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Senaeva (Pugacheva) E.I. Malyigina I.Yu. Structure of Fe-Ni-Ti-C-B SHS Copmposites // Physics of Metals and Metallography. 2019. Vol. 120. No. 11. P. 1078-1084. DOI: 10.1134/S0031918X19110139.     in Russian Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Goruleva L.S. Makarov A.V. Volkova E.G. Microstructure of a Laser-Welded Joint between a Chromium – Nickel Steel and a Titanium Alloy with a Copper Insert // Physics of Metals and Metallography. 2019. Vol. 120. No. 8. P. 775-781. DOI: 10.1134/S0031918X1908012X.     in Russian Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Deformation of 08G2B Steel before and at the Yield Plateau by Digital Image Correlation Technique. Part 1. Formation of Plastic and Elastic Deformation Waves // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 5-6. P. 274-279. DOI: 10.1007/s11041-019-00416-z.     in Russian Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Strain before and on the Yield Plateau of Steel 08G2B by Correlation of Digital Images. Part II. Functioning of Flow Channels and Zones in Them // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 7-8. P. 405-410. DOI 10.1007/s11041-019-00437-8.     in Russian Zalazinskiy A.G. Nesterenko A.V. Berezin I.M. Study of Compaction of the Titanium Powder by the Experimental-Analytical Method // Russian Journal of Non-Ferrous Metals. 2019. Vol. 60. No. 5. P. 499-503. https://dx.doi.org/10.3103/S1067821219050183.     in Russian Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.   Pugacheva (Vandysheva) N.B. Guzanov B.N. Obabkov N.V. Bykova (Gurchenko) T.M. Michurov N.S. Studying the Structure and Adhesion Strength of Thermal Barrier Coating // AIP Conference Proceedings. 2019. Vol. 2176. 030013. – https://doi.org/10.1063/1.5135137.   Pugacheva (Vandysheva) N.B. NikolinYu.V. Senaeva (Pugacheva) E.I. The Structure and Wear Resistance of a Ti-Ni-Fe-C-B Composite // AIP Conference Proceedings. 2019. Vol. 2176. 020007. – https://doi.org/10.1063/1.5135119.   Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. Pestov A.V. Studying the Mechanical Properties of Epoxy Adhesive Coatings by Instrumented Indentation // AIP Conference Proceedings. 2019. Vol. 2176. – 020008. – https://doi.org/10.1063/1.5135120.   Struzhanov V.V. On One Inverse Problem in the Theory of Eigenstresses // AIP Conference Proceedings. 2019. Vol. 2176. 040015. – https://doi.org/10.1063/1.5135164.   Struzhanov V.V. Korkin A.V. Quenching Stresses and Shaft Failure // AIP Conference Proceedings. 2019. Vol. 2176. 040012. – https://doi.org/10.1063/1.5135161.   Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.   Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.   Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.   Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.   Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.   Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.   Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.   in Russian Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.   in Russian Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.   in Russian Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.   in Russian Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.     Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.     Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.     Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.     Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.     Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.     Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.     Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.     Konovalov D.A. Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Determining AlMg6/10%SiCp Representative Elementary Volume Size by Kinetic Indentation // AIP Conference Proceedings. 2018. Vol. 2053. 040045. https://doi.org/10.1063/1.5084483.   Michurov N.S. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Igumnov A.S. Contribution of Intermetallics to the Formation of the Stress-Strain State of Tensile Welds on the AISI 321 Steel and the Grade 2 Titanium Alloy with a Copper Insert // AIP Conference Proceedings. 2018. Vol. 2053. – 040058. – https://doi.org/10.1063.   Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.   Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.   Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.   Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.   Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.   Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.   Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.   Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.   Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.   Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.   Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.   Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.   Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.   Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.   Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.   Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.   Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.   Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.   Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.   Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.   Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.   Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.   Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.   Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.   Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.   Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.   Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.   Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.   Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219. Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168. Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029. Full text>> Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Michurov N.S. Senaeva (Pugacheva) E.I. Cheremicina E.R. Effect of the Content of SiC on the Structure and Properties of D16 alloy matrix composites // AIP Conf. Proc. 2017. Vol. 1915. – 030021. Full text>> Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020. Full text>> Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008. Full text>> Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028. Full text>> Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062. Full text>> Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068. Full text>> Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069. Full text>> A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007. Full text>> Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022. Full text>> Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026. Full text>> Michurov N.S. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. The Structural State and Geometric Representation of a Laser-Welded Joint between a Corrosion-Resistant Steel and a Titanium Alloy with a Copper Insert . –https://doi.org/10.1063/1.5013818 // AIP Conference Proceedings. 2017. Vol. 1909. – 020137. Pugacheva (Vandysheva) N.B. A.N. Cherepanov A.M. Orishich A.G. Malikov I.O. Drozdov V.I. Mali Senaeva (Pugacheva) E.I. Investigation of the Structure and Properties of a Composite Insert Applied at Laser Welding of Steel with Titanium // AIP Conference Proceedings. 2017. Vol. 1893. – 030107. Text in >> Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Bykova (Gurchenko) T.M. Pugacheva E.I. Aluminium Matrix Composites with a SiC Filler . – https://doi.org/10.1063/1.5013861 // AIP Conference Proceedings. 2017. Vol. 1909. – 020180. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80. Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov A Computational Model of V95/SiCp (7075/ SiCp) Aluminum Matrix Composite Applied to Stress-Strain State Simulation under Tensile, Compressive and Shear Loading Conditions [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.016-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 16-27. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Estimating the Effect of Fillers on the Mechanical Properties of Epoxy Glue Coatings by Microindentation [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.103-111 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 103-111. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. V.М. Fomin A.А. Filippov Т.А. Brusentseva Studying Epoxy Resin Reinforced with Silica Dioxide Nanoparticles by Microindentation [Electronic resource] // . – DOI: 10.17804/2410-9908.2017.1.024-035 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 24-35. Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52. S.V. Anakhov Pugacheva (Vandysheva) N.B. Yu.A. Pykin A.V. Matushkin Bykova (Gurchenko) T.M. Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology // Inorganic Materials: Applied Research. 2017. Vol. 8. – No. 3. P. 400-405. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Smirnov A.S. Pugacheva (Vandysheva) N.B. Konovalov A.V. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature // International Journal of Material Forming. 2017. Vol. 10. – Iss. 5. P. 831–843. Full text>> Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions . – doi:10.1088/1757-899X/208/1/012037 // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012037. Full text>> E.V. Shalaeva N.I. Medvedeva A.E. Precul Smirnova (Yekzemplyarova) E.O. Smirnov S.V. N.I. Shchegolikhina I.O. Selyanin Ordering Effect on the Mechanical, Electronic and Magnetic Properties of the –Based Non-Canonical Approximant Phase: -Al50Cu33Fe17’-Al50Cu44Fe6 and -Al47.5Cu49.5Fe3 // Philosophical Magazine. 2017. Vol. 97. – No. 13. P. 1024-1046. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302. L.A. Elshina R.V. Muradymov A.G. Kvashnichev Vichuzhanin D.I. N.G. Molchanova A.A. Pankratov Synthesis of New Metal-Matrix Al-Al2O3-Graphene Composite Materials // Russian Metallurgy (Metally). 2017. No. 8. P. 631-641. Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820. Struzhanov V.V. On the method of orthogonal projections in the theory of elasticity // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 2. P. 308-325. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical of plastic deformation and fracture of complexly aiioyed brass // International Journal of Damage Mechanics. 2016. vol. 25, № 2. P. 251 – 265. Smirnov S.V. Zamaraev L.M. Energy of Activation of the Vt5 and Vt1-0 Titanium Alloys under Short-Term Creep in Air and Argon [Electronic resource]. 2016. Iss. 6. Pugacheva (Vandysheva) N.B. Zamaraev L.M. Igumnov А.S. Modeling the Thermo-Stressed State in the Nodes of the Honeycomb Structure with a Non-Uniform Distribution of Physical-Mechanical Properties [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4.. P. 71-88. Smirnov S.V. Myasnikova M.V. Igumnov A.S. Determination of the Local Shear Strength of a Layered Metal Composite Material with a Ductile Interlayer after Thermocycling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 46-56. Smirnov S.V. Perunov E.N. Konovalov D.A. Vyskrebentsev S.V. Using a Spatial Location Device for Express Diagnostics of Current Mechanical Properties of Metal Structures [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 89-94. Struzhanov V.V. Volkov S.S. Volkova T.A. Devolopment of Microstructure Damage in Structurally Heterogeneous Materials under Deformation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 3. P. 21-30. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Michurov N.S. Smirnov S.V. Mechanical Properties and Fracture Behavior of the "copper M1 – Steel 09g2s" Bimetal Produced by Explosion Welding [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 28-38. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 39-48. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical Simulation of Plastic Deformation and Fracture of Complexly Alloyed Brass // International Journal of Damage Mechanics. 2016. Vol. 25(2). P. 251-265. Smirnov A.S. Konovalov A.V. Belozerov G. A. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Peculiarities of the rheological behavior and structure formation of aluminum under deformation at near-solidus temperatures // International Journal of Minerals, Metallurgy and Materials // International Journal of Minerals, Metallurgy and Materials. 2016. Vol.23. – Iss. 5. P. 563-571. Yolshina L.A. Muradymov R.V. Korsun I.V. Yakovlev G.A. Smirnov S.V. Novel Aluminum-Graphene and Aluminum-Graphite Metallic Composite Materials: Synthesis and Properties // Journal of Alloys and Compounds. 2016. No. 663. P. 449-459. Smirnov S.V. Konovalov D.A. Parshin S.V. Vyskrebentsev S.V. Degtyar’ V.G. Kalashnikov S.T. Taking into account the residual stresses during transverse calculation of the load frame to extend the service life above the warranty period // Journal of Machinery Manufacture and Reliability. 2016. Vol. 45. – Is. 3. P. 233-238. Smirnov A.S. Belozerov G. A. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Muizemnek O.Yu. Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis // Journal of Materials Engineering and Performance. 2016. Vol. 25(7). P. 2907-2913. Pugacheva (Vandysheva) N.B. Michurov N.S. Bykova (Gurchenko) T.M. Structure and Properties of the Al/SiC Composite Material // Physics of Metals and Metallography. 2016. Vol. 117. – No. 6. P. 634-640. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. Bykova (Gurchenko) T.M. Structure and Thermophysical Properties of Aluminum-Matrix Composites // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1145-1152. Pugacheva (Vandysheva) N.B. Myasnikova M.V. Michurov N.S. Simulation of the Elastic Deformation of Laser-Welded Joints of an Austenitic Corrosion-Resistant Steel and a Titanium Alloy with an Intermediate Copper Insert // Physics of Metals and Metallography. 2016. Vol. 117. – No. 2. P. 216-224. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Kalashnikov S.T. Ivanov A.V. Smirnov S.V. Frolova N.Yu. Studying Recovery Processes in a Strain-Hardened Al-Mg-Mn-Fe-Si Alloy // Physics of Metals and Metallography. 2016. Vol. 117. – No. 9. P. 920-926. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A numerical Study of Sress-Strain Evolution in Structurally Inhomogeneous Materials Subjected to Uniaxial Loading // PNRPU Mechanics Bulletin. 2016. No. 3. P. 175-187. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Michurov N.S. Senaeva (Pugacheva) E.I. INVESTIGATION OF LOCAL MECHANICAL PROPERTIES OF MATERIALS IN WELDED JOINTS OF THE VT1-0 TITANIUM ALLOY AND THE 12CR18NI10TI AUSTENITIC CORROSION RESISTANT STEEL WITH AN INTERMEDIATE COPPER INSERT WITH THE USE OF A NANOMECHANICAL TESTING SYSTEM. DOI: 10.1063/1.4967107 // AIP Conference Proceedings. 2016. Vol. 1785. С. 040050. Smirnov S.V. Veretennikova (Golubkova) I.A. Brusentseva T.A. Filippov A.A. Fomin V.M. STUDYING A HETEROGENEOUS MATERIAL BASED ON EPOXY OLIGOMER FILLED WITH SILICA BY MICROINDENTATION. DOI: 10.1063/1.4967126 // AIP Conference Proceedings. 2016. Vol. 1785. 040069. Karamyshev A.P. Nekrasov I.I. Nesterenko A.V. V.S. Parshin Smirnov S.V. Fedulov A.A. Shveikin V.P. Studying the Damage of Ingots under Plastic Deformation on a Lever-Type Radial Forging Machine // AIP Conf. Proc. 2016. Vol. 1785. – 030010. –http://dx.doi.org/10.1063/1.4967031. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Michurov N.S. Finite-Element Simulation of Multiaxial Compaction of Sponge Titanium Powder // AIP Conf. Proc. 2016. Vol. 1785. – 040008. – http://dx.doi.org/10.1063/1.4967065. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Effect of the Al/SiC Composite Structure on the Pattern of Corrosion Damage // AIP Conf. Proc. 2016. Vol. 1785. – 040049. –http://dx.doi.org/10.1063/1.4967106. Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047. Shveikin V.P. Smirnov S.V. Nesterenko A.V. Thermomechanical Hardening of Rolled Stock in a Pipe-Rolling Mill Line // AIP Conf. Proc. 2016. Vol. 1785. – 040063. –http://dx.doi.org/10.1063/1.4967120. Smirnov S.V. Smirnova (Yekzemplyarova) E.O. Pugacheva (Vandysheva) N.B. Studying the Zones of a Welded Joint of an Al-Mg-Li-Zr Aluminum Alloy By Kinetic Indentation // AIP Conf. Proc. 2016. Vol. 1785. – 040064. – http://dx.doi.org/10.1063/1.4967121. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Igumnov A.S. A Fracture Locus for Commercially Pure Aluminum at 300 °С // AIP Conf. Proc. 2016. Vol. 1785. – 040067. – http://dx.doi.org/10.1063/1.4967124. Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Patterns of the Change in the Mechanical Properties of a Bimetallic Welded Joint under Plastic Deformation // AIP Conf. Proc. 2016. Vol. 1785. – 040089. – http://dx.doi.org/10.1063/1.4967146. Yolshina L.A. Muradymov R.V. Vovkotrub E.G. Smirnov S.V. Diamond Synthesis in Aluminum Matrix in Molten Alkali-Halide at Ambient Pressure // Diamond and Related Materials. 2015. Vol. 55. P. 1-11. Pugacheva (Vandysheva) N.B. Trushina E.B. Antenorova N.P. Pugacheva E.I. Comparative Studies of the Character of Destruction in 38Kh2N2MA and 12Kh2N4A Steel Gearwheel Teeth Operated under Extreme Conditions // Journal of Friction and Wear. 2015. Vol. 36. No. 3. P. 229-236. Pugacheva (Vandysheva) N.B. Antenorova N.P. Pugacheva E.I. Study of the Structure and Properties of Laser-Welded Joints of the Al-Mg-Li Alloy // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 1259-1269. Pestov A.V. Kuznetsov V.A. Mekhaev A.V. Gorbunova T.I. Saloutin V.I. Smirnov S.V. Vichuzhanin D.I. Matafonov P.P. Designing New Adhesive Materials Based on Epoxy Oligomers Filled with Organic Compounds // Polymer Science. Series D. Glues and Sealing Materials. 2015. Vol. 8. No. 2. P. 149-152. Cherepanov A.N. Orishich A.M. Pugacheva (Vandysheva) N.B. Shapeev V.P. Investigation of the Structure and Properties of Titanium-Stainless Steel Permanent Joints Obtained by Laser Welding with the Use of Intermediate Inserts and Nanopowders // Thermophysics and Aeromechanics. 2015. Vol. 22. Is. 2. P. 135-142. Nesterenko A.V. Novozhonov V.I. Zalazinskiy A.G. Skripov A.V. Influence of Temperature on Compactibility of Briquettes of Titanium Sponge Alloyed with Hydrogen // Russian Journal of Non-Ferrous Metals. 2015. Vol. 56. Is. 3. P. 287-292. Brusentseva Т.А. Filippov A.А. Fomin V.М. Smirnov S.V. Veretennikova (Golubkova) I.A. MODIFICATION OF EPOXY RESIN WITH SILICA NANOPARTICLES AND PROCESS ENGINEERING OF COMPOSITES BASED ON THEM. DOI: 10.1007/s11029-015-9523-6 // Mechanics of Composite Materials. 2015. Т. 51. № 4. P. 531-538. Nesterenko A.V. Zalazinskiy A.G. Novozhonov V.I. Effect of Deformation Processing on the Properties and Structure of Titanium Obtained by Plastic Deformation of Hydrogen-Alloyed Titanium Sponge [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 98-108. URL: http://dream-journal.org/issues/2015-3/2015-3_9.html. Pugacheva (Vandysheva) N.B. Current Trends in the Development of Heat-Resistant Coatings Based on Iron, Nickel and Cobalt Aluminides [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 51-82. URL: http://dream-journal.org/issues/2015-3/2015-3_30.html. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Smirnov S.V. Kalashnikov S.T. Chekushkin V.S. Antenorova N.P. Pankratov A.A. Studying the Changes in the Structure and Properties of a Magnesium Alloy after Operation and Long Annealing at Temperatures of 50 and 70 °С [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 27-39. URL: http://dream-journal.org/issues/2015-4/2015-4_38.html. Smirnov S.V. Veretennikova (Golubkova) I.A. Comparative Evaluation of Metal Damage on the Free Lateral Surface of Single-Layer and Three-Layer Strips under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 6-15. URL: http://dream-journal.org/issues/2015-4/2015-4_39.html. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. Stress state influence on plasticity limit of grade Х80 steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 73-89. Smirnov S.V. The Healing of Damage after the Plastic Deformation of Metals // Frattura ed Integrita Strutturale. Special Issue: Russian Fracture Mechanics School. 2013. – 24. P. 7-12. – DOI: 10.3221/IGF-ESIS.24.02. Dunyushkina L.A. Smirnov S.V. Plaksin S.V. Kuimov V.M. Gorelov V.P. The Across-Plane Conductivity and Microstructure of SrZr0.95Y0.05O3-d Thin Films // Ionics. 2013. Vol. 19. – №12. – DOI 10.1007/s11581-013-0910-5. P. 1715-1722. Smirnov S.V. Accumulation and healing of damage during plastic metal forming: simulation and experiment // Key Engineering Materials. 2013. V. 528. P. 61-69. Ivanov M. Smirnov S.V. Pavlyishko S.V. Ivanov D. Brenner D. Shenderova O. Tribological Properties of Motor Oil with Nanodiamond Additive Tested for Steel Friction Surfaces with Different Hardnesses // MRS Online Proceedings Library. 2013. Vol. 6038. P. 1-6. Shalaeva E.V. Chernyshev Yu.V. Smirnova (Yekzemplyarova) E.O. Smirnov S.V. Lamellar Structure and Nanomechanical Properties of Quasircristalline Al-Cu-Fe Alloys // Physics of the Solid State. 2013. Vol. 55. - №11. P. 2095-2104. Dunyushkina L.A. Smirnova (Yekzemplyarova) E.O. Smirnov S.V. Kuimov V.M. Plaksin S.V. Microstructure, hardness, and electric behavior of Y-doped CaZrO3 films prepared by chemical solution deposition // Ionics. 2012. DOI 10.1007/s11581-012-0769-x. Gorbunova T.I. Pervova M.G. Trushina E.B. Pavlyishko S.V. Zapevalov A.Ya. Saloutin V.I. A New Application of Derivatives of Polychlorobiphenyls and Polyethylene Glycols // Russian Journal of Applied Chemistry. 2012. Vol. 85. No 10. P. 1632-1636. Mitropolskaya S.Yu. Vichuzhanin D.I. Berezovskaya V.V. Effect of elastoplastic deformation on structure and magnetic properties of high-strength corrosion-resistant austenitic steel of type 03Kh20AG11N7M2 // Metallovedenie i termicheskaya obrabotka metallov. 2011. N2. P. 17-21. S.V. Grachev O.V. Zhuikov V.P. Grozdovskii E.S. Matsneva Vichuzhanin D.I. Structure and Properties of High-Carbon Steel Cast Pellets // Metal Science and Heat Treatment. 2011. Vol. 53. – Nos 1-2. P. 57-60. Gorkunov E.S. Mitropolskaya S.Yu. Vichuzhanin D.I. Magnetic method for estimation of load and damage levels in X70 steel // Physical Mesomechanics. 2011. V.14, №1-2. Shchennikov V.V. Korobeynikov I.V. Morozova N.V. Veretennikova (Golubkova) I.A. Ovsyannikov S.V. Misiuk A. Abrosimov N.V. THERMOELECTRIC POWER OF COMPENSATED SI1-XGEX SAMPLES AT HIGH PRESSURE // Journal of Thermoelectricity. 2011. № 4. P. 54-58. Makarov A.V. Taratorkin A.I. Davydova (Pozdejeva) N.A. Smirnov S.V. Vichuzhanin D.I. Korshunov L.G. Malyigina I.Yu. Effect of hardening friction treatment with hard-alloy indenter on microstructure, mechanical properties, and deformation and fracture features of constructional steel under static and cyclic tension // Surface and Coatings Technology. 2010. V. 205 Is. 3. P. 841-852. Gorkunov E.S. Mitropolskaya S.Yu. Osinceva A.L. Vichuzhanin D.I. Magnetic investigation of strains and stresses in surface-hardened materials // Physical Mesomechanics. 2009. V.12. №2. P. 95-104. Veretennikova (Golubkova) I.A. Smirnov S.V. Simulation of accumulative roll-bonding process // Proceedings of the XXXVI Summer School «Advanced Problem in Mechanics». St. Peterburg: APM, 2008. P. 288 – 290. Gorkunov E.S. Mitropolskaya S.Yu. Smirnov S.V. Zadvorkin S.M. Correlation between the Stress–Strain State Parameters and Magnetic Characteristics of Carbon Steels // The Physics of Metals and Metallography. 2007. Vol. 103, No. 3. P. 311–316. Gorkunov E.S. Makarov A.V. Rogovaya S.A. Savrai R.A. Smirnov S.V. Zadvorkin S.M. The Use of Magnetic Methods for the Estimation of Plastic Deformation under Cyclic Loading of Annealed Medium-Carbon Steel // In: Abstr. of the 9th European Conference for Non-Destructive Testing, Part 2, Germany, Berlin, September 25-29. 2006. 86 p. Gorkunov E.S. Makarov A.V. Rogovaya S.A. Taratorkin A.I. Smirnov S.V. Zadvorkin S.M. The Use of Magnetic Methods for the Estimation of Plastic Deformation under Cyclic Loading of Annealed Medium-Carbon Steel // In: DGZfP Proc. BB 103-CD ISBN 3-931381-86-2 of the 9th European Conference for Non-Destructive Testing, Part 2, Germany, Berlin, September 25-29. 2006. 86 p. Gorkunov E.S. Tsar'kova T. P. Smirnov S.V. Vichuzhanin D.I. Emelyanov I.G. Kuznetsov V. Yu. Effect of Deviation from Coaxiality between the Directions of Magnetization and Mechanical Strain on the Results of Magnetic Testing of Elastic Strain in Steels // Russian Journal of Nondestructive Testing.- May. 2004. Volume 40, Issue 5. P. 317-325. Smirnov S.V. Domilovskaya T. Definition of the kinetic equation form for damage under the plastic deformation // Fatigue and Fracture of Engineering Materials and Structures. 2003. 26. P. 373-379. Lapovok R. Smirnov S.V. Shveykin V. Damage mechanics for the fracture prediction of metal forming tools // International Journal of Fracture. 2000. v.103. P. 111-126. Lapovok R. Smirnov S.V. Shveykin V. Damage mechanics for the fracture prediction of metal forming tools // International Journal of Fracture. 2000. v.103. P. 111-126. Lapovok R. Smirnov S.V. Solomein V. Modeling the helical rolling of rods in a three-high mill // Journal of Materials Processing Technology. 1998. v. 80-81. P. 337-340. Kolmogorov V.L. Smirnov S.V. The restoration of the margin of metal plasticity after cold deformation // Journal of Materials Processing Technology. 1998. v. 74. P. 83-88. Kolmogorov V.L. Smirnov S.V. Healing of metal microdefects after cold deformation // In: Advanced Methods in Ma-terials Processing Defects edited by M. Redeleanu and P. Gilormini. Elsevier Science B.V. 1997. P. 61-69. Smirnov S.V. Domilovskaya T.V. Bogatov A.A. Definition of the form for kinetic equation of damage during the plastic deformation // In: Advanced Methods in Materials Processing Defects edited by M. Redeleanu and P. Gilormini. Elsevier Science B.V. 1997. P. 71-80. Smirnov S.V. Bogatov A.A. Shveikin V.P. Nesterenko A.V. An installation for material plasticity investigation under complex stress-strain state condition // In.: Proc. of Int. Conf. MECAMAT-92. Paris, 1992. P. 716-727. Struzhanov V.V. A Method for Calculating Stresses in a Multiply Connected Elastic Body [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 0000. Iss. 1. P. 34-42. DOI: 10.17804/2410-9908.2020.1.034-42.