| Forward >>
  1. Skorynina P.A. Makarov A.V. Savrai R.A. Substantiating the process parameters of frictional treatment with a sliding indenter for an austenitic chromium‑nickel steel // Tribology Letters. 2024. V. 72. Is. 1. Art. 9. P. 1-16. [10.1007/s11249-023-01816-2].
    WoS 

  2. Savrai R.A. Skorynina P.A. Makarov A.V. Men’shakov A.I. Gaviko V.S. The influence of frictional treatment and low-temperature plasma carburizing on the structure and phase composition of metastable austenitic steel // Physics of Metals and Metallography. 2023. V. 124. No. 5. P. 496-503. [10.1134/S0031918X23600483].
    WoS 

  3. Gladkovsky S.V. Veselova V.E. Vichuzhanin D.I. Zichenkov M.Ch. Dubinskii S.V. Kovalev N.I. Kulemin A.V. Kovalev I.E. Effect of Heat-Treatment Conditions on the Microstructure and the Static Fracture Toughness of an α + β VT23 Titanium Alloy // Russian Metallurgy (Metally). 2023. V. 2023. No. 4. З. 425-432. [10.1134/S0036029523040092].
    WoS 

  4. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Inhomogeneous Couette flows for a two-layer fluid // Вестник Самарского государственного технического университета. Серия «Физико-математические науки». 2023. Т. 27. - №. 3. P. 530–543. [10.14498/vsgtu1968].
    WoS 

  5. Salikhyanov D.R. Michurov N.S. The concept of microsimulation of processes of joining dissimilar materials by plastic deformation // Обработка металлов (технология, оборудование, инструменты). 2023. V. 25. No. 3. P. 36–49. [10.17212/1994-6309-2023-25.3-36-49].
    WoS 

  6. Smirnov S.V. Myasnikova M.V. Pestov A.V. Konovalov D.A. Smirnova (Yekzemplyarova) E.O. A New Method for Adhesion Strength Assessment of Indented Polymer Coatings // Physical Mesomechanics. 2023. V. 26. No. 5. P. 514-522. [10.1134/S1029959923050041].
    WoS 

  7. Smirnov A.S. Kanakin V.S. Konovalov A.V. Neural Network Modeling of Microstructure Formation in an AlMg6/10 % SiC Metal Matrix Composite and Identification of Its Softening Mechanisms under High-Temperature Deformation // Applied Sciences. 2023. Vol. 13. № 2. 939 p. [10.3390/app13020939].
    WoS 

  8. Ershkov S. Leshchenko D. Prosviryakov E.Yu. A novel type of ER3BP introducing Milankovitch cycles or seasonal irradiation processes influencing onto orbit of planet // Archive of Applied Mechanics. 2023. Vol. 93. P. 813–822. [10.1007/s00419-022-02300-4].
    WoS 

  9. Bobrovskiy V.S. Kazakov A.L. Rojas E.M. Sinitsyn A.V. Spevak L.F. Steady-states solutions of the Vlasov–Maxwell–Fokker–Planck system of proton channeling in crystals // Communications in Nonlinear Science and Numerical Simulation. 2023. Vol. 118. 107005. [10.1016/j.cnsns.2022.107005].
    WoS 

  10. Burmasheva N.V. Ershkov S. Prosviryakov E.Yu. Leshchenko D. Exact Solutions of Navier–Stokes Equations for Quasi-Two-Dimensional Flows with Rayleigh Friction // Fluids. 2023. Vol. 8. No. 4. 123. [10.3390/fluids8040123].
    WoS 

  11. Gushina N.V. Ovchinnikov V.V. Shalomov K.V. Vichuzhanin D.I. Effect of Ion Irradiation on Resource Characteristics of the V95 Alloy (Al-Zn-Mg-Cu) // Inorganic Materials: Applied Research. 2023. Vol. 14. No. 2. P. 557-559. [10.1134/S2075113323020193].
    WoS 

  12. Salikhyanov D.R. Michurov N.S. Joining of dissimilar aluminum alloys AA5154 and AA2024 by cold roll bonding // International Journal of Advanced Manufacturing Technology. 2023. V. 129 (1-2). P. 255–277. [10.1007/s00170-023-12292-2].
    WoS 

  13. Ershkov S. Prosviryakov E.Yu. Leshchenko D. Exact Solutions for Isobaric Inhomogeneous Couette Flows of a Vertically Swirling Fluid // Journal of Applied and Computational Mechanics. 2023. Vol. 9. No. 2. P. 521–528. [10.22055/jacm.2022.41371.3744].
    WoS 

  14. Solovyova I.V. Yang Shizhong Starovoitov O.N. Molecular dynamics simulation studies of 1,3-dimethyl imidazolium nitrate ionic liquid with water // Journal of Chemical Physics. 2023. 158, 084505. [10.1063/5.0134465].
    WoS 

  15. Salikhyanov D.R. Kamantsev I.S. Michurov N.S. Technological Shells in Rolling Processes of Thin Sheets from Hard-to-Deform Materials // Journal of Materials Engineering and Performance. 2023. [10.1007/s11665-023-07834-4].
    WoS 

  16. Mushnikov A.N. Zadvorkin S.M. Vichuzhanin D.I. Soboleva N.N. Effect of Biaxial Tension on the Coercive Force of Low-Alloy Steel // Journal of Nondestructive Evaluation. 2023. V. 42. Article number 94. [10.1007/s10921-023-01012-1].
    WoS 

  17. Pugacheva (Vandysheva) N.B. Kruchkov D.I. Bykova (Gurchenko) T.M. Vichuzhanin D.I. Studying the Plastic Deformation of Cu-Ti-C-B Composites in a Favorable Stress State // Materials. 2023. Vol. 16. 3204. [10.3390/ma16083204].
    WoS 

  18. Ershkov S. Prosviryakov E.Yu. Leshchenko D.D. Burmasheva N.V. Semianalytical findings for the dynamics of the charged particle in the Störmer problem // Mathematical Methods in the Applied Sciences. 2023. V. 46. Iss. 18. P. 19364–19376. [10.1002/mma.9631].
    WoS 

  19. Ershkov S. Leshchenko D. Prosviryakov E.Yu. Abouelmagd EI. Finite-Sized Orbiter’s Motion around the Natural Moons of Planets with Slow-Variable Eccentricity of Their Orbit in ER3BP // Mathematics. 2023. V. 11. No. 14. 3147 p. [10.3390/math11143147].
    WoS 

  20. Ershkov S.V. Prosviryakov E.Yu. Artemov M.A. Leshchenko D.D. Non-Stationary Helical Flows for Incompressible Couple Stress Fluid // Mathematics. 2023. Vol. 11. No.24. Article number 4999. [doi.org/10.3390/math11244999 ].
    WoS 

  21. Menshakov A. Bruhanova Yu. Skorynina P.A. Medvedev A. Plasma enhanced high‐rate deposition of advanced film materials by metal reactive evaporation in organosilicon vapors // Membranes. 2023. V. 13 (4). Art. 374. [10.3390/membranes13040374].
    WoS 

  22. Smolentsev A.S. Votinova E. B. Veselova V.E. Balin A.N. Study of microstructure and properties of high-strength alloy steel welded joints made with austenitic flux-cored wire with nitrogen // Metallurgist. 2023. Vol. 67. Nos. 7-8. [10.1007/s11015-023-01582-5].
    WoS 

  23. Dvoynikov D.A. Gladkovsky S.V. Zalazinskiy A.G. Titov V.G. Shveikin V.P. Prediction of the high structural strength of system-alloyed maraging steels using neural-network modeling // Metallurgist. 2023. Vol. 67. No. 1-2. P. 249-255. [10.1007/s11015-023-01508-1].
    WoS 

  24. Vykhodets V. Nefedova O.A. Kurennykh T. Vykhodets E. First Observation of Quantum Diffusion in Non-Cubic Metal: Deuterium Diffusion in In // METALS. 2023. Vol. 13. No. 2. 394 p. [10.3390/met13020394].
    WoS 

  25. Savrai R.A. Skorynina P.A. Makarov A.V. Kogan L.Kh. Men’shakov A.I. The influence of frictional treatment and low-temperature plasma carburizing on the microhardness and electromagnetic properties of metastable austenitic steel // Physics of Metals and Metallography. 2023. V. 124. No. 8. P. 816-823. [10.1134/S0031918X23601166].
    WoS 

  26. Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil’mutdinov F.Z. Towards eliminating friction and wear in plain bearings operating without lubrication // Scientific Reports. 2023. V. 13. Art. 17362. P. 1-13. [10.1038/s41598-023-44702-6].
    WoS 

  27. Ershkov S. Leshchenko D. Prosviryakov E.Yu. Semi-Analytical Approach in BiER4BP for Exploring the Stable Positioning of the Elements of a Dyson Sphere // Symmetry. 2023. Vol. 15. No. 2. P. 326-346. [10.3390/sym15020326].
    WoS 

  28. Ershkov S. Burmasheva N.V. Leshchenko D.D. Prosviryakov E.Yu. Exact Solutions of the Oberbeck–Boussinesq Equations for the Description of Shear Thermal Diffusion of Newtonian Fluid Flows // Symmetry. 2023. V.15. No. 9. 1730 p. [10.3390/sym15091730].
    WoS 

  29. Afzal W. Prosviryakov E.Yu. El-Deeb S.M. Almalki Y. Some New Estimates of Hermite–Hadamard, Ostrowski and Jensen-Type Inclusions for h-Convex Stochastic Process via Interval-Valued Functions // Symmetry. 2023. Vol. 15. No. 4. P. 831-849. [10.3390/sym15040831].
    WoS 

  30. Ershkov S.V. Prosviryakov E.Yu. Burmasheva N.V. Christianto V. Solving the Hydrodynamical System of Equations of Inhomogeneous Fluid Flows with Thermal Diffusion: a Review // Symmetry. 2023. V. 15. 1825 p. [10.3390/sym15101825].
    WoS 

  31. Gladkovsky S.V. Veselova V.E. Sergeev S.N. Patselov A.M. Mechanical Characteristics of the Titanium Alloy Ti-5Al-5 V-2Mo-Cr with Metastable β-Phase // Transactions of the Indian Institute of Metals. 2023. [10.1007/s12666-023-02908-2].
    WoS 

  32. Salikhyanov D.R. Michurov N.S. Simulation of the rolling process of a laminated composite AMg3/D16/AMg3 // Обработка металлов (технология, оборудование, инструменты). 2023. V. 25. No. 3. P. 6–18. [10.17212/1994-6309-2023-25.3-6-18].
    WoS 

  33. Gladkovsky S.V. Petrova (Kuteneva) S.V. Cherkasova T.S. Patselov A.M. Structure, physical and mechanical properties of aluminum matrix composites reinforced with carbide particles // Metal Science and Heat Treatment. 2023. Vol. 65. No. 1-2. P. 54-61. [10.1007/s11041-023-00891-5].
    WoS 

  34. Mushnikov A.N. Povolotskaya A.M. Zadvorkin S.M. Goruleva L.S. Putilova E. A. Effect of Elastic-Plastic Deformation by Biaxial Tension on the Magnetic Characteristics of Nickel // Russian Journal of Nondestructive Testing. 2023. V. 59. - No. 11. P. 1093–1106. [10.1134/S1061830923600879].
    WoS 

  35. Kazakov A.L. Spevak L.F. On a solution to a nonlinear heat transfer model by the BEM // AIP Conference Proceedings. 2023. Vol. 2624. 030027 p. [10.1063/5.0132777].
    WoS 

  36. Emelyanov I.G. Ogorelkov D. A. Fatigue of a cylindrical shell lying on a rigid bed // Procedia Structural Integrity. – 2023. - V. 50. - P. 57-64. [10.1016/j.prostr.2023.10.022] // Procedia Structural Integrity. 2023. V. 50. P. 57-64. [10.1016/j.prostr.2023.10.022].
    Scopus 

  37. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and micromechanical properties of SHS composites with a copper matrix: peculiarities of formation // Frontier Materials & Technologies. 2023. № 4. P. 99 - 108. [10.18323/2782-4039-2023-4-66-9].
    Scopus 

  38. Babaylov N.A. Loginov Yu.N. Polyanskii L.I. Cracking in MgO briquettes // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. 2023. Vol. 66. No. 1. P. 86-88. [10.17073/0368-0797-2023-1-86-88].
    Scopus 

  39. Putilova E. A. Goruleva L.S. Zadvorkin S.M. Skorynina P.A. Savrai R.A. Kryucheva K. D. Evolution of the structure and physical-mechanical properties of metastable steel after surface frictional treatment with varying loading on the indenter // Letters on materials. 2023. V.13. No.3. P. 191-196. [10.22226/2410-3535-2023-3-191-196].
    Scopus 

  40. Berestova S. A. Prosviryakov E.Yu. An Inhomogeneous Steady-State Convection of a Vertical Vortex Fluid // Russian Journal of Nonlinear Dynamics. 2023. Vol. 19. No. 2. P. 167-186. [10.20537/nd230201].
    Scopus 

  41. Liaqat M.I. Akgül A. Prosviryakov E.Yu. An efficient method for the analytical study of linear and nonlinear time-fractional partial differential equations with variable coefficients // Вестник Самарского государственного технического университета. Серия «Физико-математические науки». 2023. V. 27. No. 2. P. 214–240. [10.14498/vsgtu2009].
    Scopus 

  42. Salikhyanov D.R. Investigation of the stress-strain state at the boundary between materials during rolling of a layered composite // Chernye Metally. 2023. No. 9. P. 34–39. [10.17580/chm.2023.09.06].
    Scopus 

  43. Hoodorozhkov S. Yurkevich A.V. Theoretical and Experimental Study of the Vehicle’s Dynamics Equipped with the Mechanical Stepless Transmission // Networked Control Systems for Connected and Automated Vehicles. 2023. V. 509. P. 787-796. [10.1007/978-3-031-11058-0_79].
    Scopus 

  44. Emelyanov I.G. Hodak A.S. Thin-walled shell service life under variable thermomechanical load // Procedia Structural Integrity. 2023. V. 50. P. 50-56. [10.1016/j.prostr.2023.10.021].
    Scopus 

  45. Emelyanov I.G. Ogorelkov D. A. Fatigue of a cylindrical shell lying on a rigid bed // Procedia Structural Integrity. 2023. V. 50. P. 57-64. [10.1016/j.prostr.2023.10.022].
    Scopus 

  46. Polyakov A.P. Polyakov P.A. Calculating the parameters of extrusion of bars from iron-based powder compositions // Procedia Structural Integrity. 2023. V. 50. P. 228-235. [10.1016/j.prostr.2023.10.046].
    Scopus 

  47. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Transverse Rupture Strength of Cu-Ti-C-B Composite // Procedia Structural Integrity. 2023. V. 50. P. 251-256. [10.1016/j.prostr.2023.10.048].
    Scopus 

  48. Smirnov A.S. Konovalov A.V. Kanakin V.S. Spirina I.A. Simulation of the Rheological Behavior and Dynamic Simulation of the Behavior and Dynamic Recrystallization of Rheological the Heterogenized Alloy Recrystallization of the Heterogenized V95 ( 7075 ) Alloy // Procedia Structural Integrity. 2023. V. 50. P. 266–274. [10.1016/j.prostr.2023.10.050].
    Scopus 

  49. Prosviryakov E.Yu. Mikhailov S. A. Ledyankina O. A. Goruleva L.S. Exact Solutions to the Navier–Stokes Equations with the Boussinesq Approximation for Describing Binary Fluid Flows // Russian Aeronautics. 2023. Vol. 66. No. 3. P. 500–509. [10.3103/S106879982303011X].
    Scopus 

  50. Mukanov G.Zh. Kuznetsov V.P. Shveikin V.P. Kamantsev I.S. Finite element simulation of frictional surface hardening by a rotary tool during the hardening of the faces of fixation holes for washers // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 5. P. 53–68. [10.17804/2410-9908.2023.5.053-068].
    РИНЦ  VAC list 

  51. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Goruleva L.S. Thermophysical Properties of a Cu–Ti–C–B Shs Composite // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 3. P. 50-65. [10.17804/2410-9908.2023.3.050-065].
    VAC list 

  52. Grokhovsky V.I. Gladkovsky S.V. Badekha K.A. Veselova V.E. Brittle Fracture Resistance of the Fe–17%ni Alloy of Extraterrestrial Origin (the Chinga Meteorite) under Static and Dynamic Loading // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 145-158. [10.17804/2410-9908.2023.6.145-158].

  53. Emelyanov I.G. Applying the method of virtual elements to solving contact problems of shells of revolution interacting with surfaces of inconsistent shape // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 2. P. 19–40. [10.17804/2410-9908.2023.2.019-040].

  54. Goruleva L.S. Prosviryakov E.Yu. Exact solutions for the description of nonuniform unidirectional flows of magnetic fluids in the Lin–Sidorov–Aristov class // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 5. P. 39-52. [10.17804/2410-9908.2023.5.039-052].

  55. Goruleva L.S. Prosviryakov E.Yu. Exact Solutions to the Navier–stokes Equations for Describing Inhomogeneous Isobaric Vertical Vortex Fluid Flows in Regions with Permeable Boundaries // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 1. P. 41-53. [10.17804/2410-9908.2023.1.041-053].

  56. Goruleva L.S. Zadvorkin S.M. Vichuzhanin D.I. Savrai R.A. Skorynina P.A. An Experimental and Computational Study of Through-Depth Strain Distribution During Frictional Treatment of a Metastable Austenitic Steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 132-144. [10.17804/2410-9908.2023.6.132-144].

  57. Kamantsev I.S. Golodnov A.I. Sukhova M.R. Kornienko O.Y. Belikov  S.V. Fracture Behavior of Grid Structures with Periodic and Quasiperiodic Designs // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 78-89. [10.17804/2410-9908.2023.6.078-089].

  58. Kruchkov D.I. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Deformation of Al–zn–mg–cu Composite Samples under Nonstationary Thermomechanical Conditions // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 6. P. 8-25. [10.17804/2410-9908.2023.6.008-025].

  59. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Kamantsev I.S. Studying the possibility of plastic deformation of the Ni-Fe-Cr-Ti-B-C composite // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 5. P. 15–30. [10.17804/2410-9908.2023.5.015-030].

  60. Koroleva (Chekhomova) L.F. Savrai R.A. Prosviryakov E.Yu. Kostarev V.A. Pavlyishko S.V. Kostarev P. V. The Effect of Abrasive Additives on the Tribotechnical Properties of Lubricants for the Wheel–rail System // Diagnostics, Resource and Mechanics of Materials and Structures. 2023. Iss. 1. P. 54-64. [10.17804/2410-9908.2023.1.054-064].

  61. Sharapova V.A. Kamantsev I.S. Shveikin V.P. Ivanov V.Yu. Ryaboukhin O.V Influence of irradiation with accelerated electrons on the physical properties of polyethylene terephthalate // Technical Physics Letters. 2022. Vol. 48. No. 3. P. 28-30. [10.21883/TPL.2022.03.52878.19068].
    WoS  Scopus 

  62. Emelyanov I.G. Kislov A.N. Strength analysis of thin-wall structures operating in aggressive environments for prolonged periods // Materials Physics and Mechanics. 2022. 50(3). P. 475-484. [10.18149/MPM.5032022_10].
    WoS 

  63. Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Kosmachev P.V. Nedzvetsky P.D. Adhesive and impact strength of hybrid layered metal-polymer composites reinforced by basalt fiber // Letters on materials. 2022. 12 (3). P. 225-230. [10.22226/2410-3535-2022-3-225-230].
    WoS 

  64. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. The Structure and Fracture Pattern of a Сu–Ti–Al–Ni–Fe–C–B Composite after Abrasive Wear // Physics of Metals and Metallography. 2022. Vol. 123. No. 10.. P. 963–970. [10.1134/S0031918X22600920].
    WoS 

  65. Pugacheva (Vandysheva) N.B. Zadvorkin S.M. Michurov N.S. EBSD Analysis of an Austenitic Cr–Ni Steel Laser Weld // Physics of Metals and Metallography // Physics of Metals and Metallography. 2022. Vol. 123. No. 8. P. 791–796. [10.1134/S0031918X22080087].
    WoS 

  66. Burmasheva N.V. Prosviryakov E.Yu. Inhomogeneous Nusselt–Couette–Poiseuille Flow // Theoretical Foundations of Chemical Engineering. 2022. Vol. 56. No. 5. P. 662–668. [10.1134/S0040579522050207].
    WoS 

  67. Priymak E.Y. Stepanchukova A.V. Atamashkin A.S. Gladkovsky S.V. Vichuzhanin D.I. Tensile Deformation Behavior of Rotary Friction Welded Joint of Steels 32G2 and 40KhN // Metal Science and Heat Treatment. 2022. Vol. 64. P. 403–409. [10.1007/s11041-022-00821-x].
    WoS 

  68. Farber V.M. Morozova A.N. Vichuzhanin D.I. Karabanalov M.S. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part 1. Bands of Localized Strain // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00815-9].
    WoS 

  69. Putilova E. A. Mushnikov A.N. Zadvorkin S.M. Kryucheva K. D. Effect of Tensile Elastic Deformations on Magnetic Properties of Preliminarily Deformed Structural Steel Operating Under Pressure // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00822-w].
    WoS 

  70. Savrai R.A. Kogan L.Kh. Effect of hardening frictional treatment on features of eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact fatigue loading // Russian Journal of Nondestructive Testing. 2022. V. 58. No. 8. P. 722–731. [10.1134/S1061830922080095].
    WoS 

  71. Vykhodets V. Nefedova O.A. Kurennykh T. Obukhov S. Vykhodets E. Debye Temperature and Quantum Diffusion of Hydrogen in Body-Centered Cubic Metals // ACS Omega. 2022. Vol. 7. Iss. 10. P. 8385-8390. [10.1021/acsomega.1c05902].
    WoS 

  72. Byval’tsev S. V. One method for experimental investigation of deformation inhomogeneity // AIP Conference Proceedings. 2022. Vol. 2456. 020006 p. [10.1063/5.0074865].
    WoS 

  73. Emelyanov I.G. Mironov V.I. Lukashuk O. Procedure for Solving a Physical-Mechanical Problem of Determining Stress Fields, Temperatures and Hydrogen Concentration // AIP Conference Proceedings. 2022. Vol. 2456 020026. [10.1063/5.0074691].
    WoS 

  74. Kamantsev I.S. Kuznetsov A.V. Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Yu. Margamov I.G. Senaeva (Pugacheva) E.I. Estimation of Cyclic Cracking Resistance of Promising 26KhMFA Pipe Steel in the Interval of Climatic Temperatures // AIP Conference Proceedings. 2022. Vol. 2509 Р. 020097. [10.1063/5.0084820].
    WoS 

  75. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. The selection of a workpiece under computer-aided design of press forging // AIP Conference Proceedings. 2022. - 2503. - 050008. [10.1063/5.0107703].
    WoS 

  76. Mironov V.I. Ogorelkov D. A. Lukashuk O. Calculation of Durability of a Welded Metal Structure Taking into Account the Cyclic Degradation of Material Properties // AIP Conference Proceedings. 2022. Vol. 2456. 020025 p. [10.1063/5.0074690].
    WoS 

  77. Yolshina L.A. Kvashnichev A.G. Vichuzhanin D.I. Smirnova (Yekzemplyarova) E.O. Mechanical and Thermal Properties of Aluminum Matrix Composites Reinforced by In Situ Al2O3 Nanoparticles Fabricated via Direct Chemical Reaction in Molten Salts // Applied Sciences. 2022. Vol. 12. 8907. . [10.3390/app12178907].
    WoS 

  78. Ershkov S. Leshchenko D. Prosviryakov E.Yu. A novel type of ER3BP introducing Milankovitch cycles or seasonal irradiation processes influencing onto orbit of planet // Archive of Applied Mechanics. 2022. [10.1007/s00419-022-02300-4].
    WoS 

  79. Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Microstructure and properties of layered metal/rubber composites subjected to cyclic and impact loading // Composite Structures. 2022. Vol. 285. 115078 p. [10.1016/j.compstruct.2021.115078].
    WoS 

  80. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to Navier–Stokes Equations Describing a Gradient Nonuniform Unidirectional Vertical Vortex Fluid Flow // Dynamics. 2022. No. 2. P. 175–186. [10.3390/dynamics2020009].
    WoS 

  81. Burmasheva N.V. Prosviryakov E.Yu. Influence of the Dufour Effect on Shear Thermal Diffusion Flows // Dynamics. 2022. No. 2. P. 367–379. [10.3390/dynamics2040021].
    WoS 

  82. Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. Effect of the stress state on the adhesive strength of an epoxy-bonded assembly // Frattura ed Integrità Strutturale. 2022. Vol. 59. P. 311-325. [10.3221/IGF-ESIS.59.21].
    WoS 

  83. Ershkov S.V. Prosviryakov E.Yu. Leshchenko D. Marangoni-type of nonstationary rivulet-flows on inclined surface // International Journal of Non-Linear Mechanics. 2022. Vol. 147. 104250 p. [10.1016/j.ijnonlinmec.2022.104250].
    WoS 

  84. Korobov Y. Alwan H. Soboleva N.N. Makarov A.V. Lezhnin N. Shumyakov V. Antonov M. Deviatiarov M. Cavitation Resistance of WC-10Co4Cr and WC-20CrC-7Ni HVAF Coatings // Journal of Thermal Spray Technology. 2022. Vol. 31. P. 234-246. [10.1007/s11666-021-01242-7].
    WoS 

  85. Smirnov S.V. Konovalov D.A. Vichuzhanin D.I. Veretennikova (Golubkova) I.A. Pestov A. Osipova V. The Effect of the Stress State, Testing Temperature, and Hardener Composition on the Strength of an AlMg5/Epoxy Metal-Polymer Joint // Materials. 2022. Vol.15. 7326. [10.3390/ma15207326].
    WoS 

  86. Pugacheva (Vandysheva) N.B. Orishich A.M. Volkova E.G. Makarov A.V. Senaeva (Pugacheva) E.I. Malikov A.G. Role of Ultra-Fine Intermetallic Particles and Martensite in Strengthening of AISI 321/Cu/Ti Laser Welded Joint // Materials Characterization. 2022. Vol. 185. P.111702. [10.1016/j.matchar.2021.111702].
    WoS 

  87. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Numerical simulation of elastic-plastic deformation of AISI 321/Cu/Ti laser welded joint under tension and compression // Materials Characterization. 2022. Vol. 189. P. 111984. [10.1016/j.matchar.2022.111984].
    WoS 

  88. Emelyanov I.G. Kislov A.N. Strength analysis of thin-wall structures operating in aggressive environments for prolonged periods // Materials Physics and Mechanics. 2022. 50(3). P. 475-484. [10.18149/MPM.5032022_10].
    WoS 

  89. Putilova E. A. Zadvorkin S.M. Kryucheva K. D. Investigation of Structure and Physical-Mechanical Properties of Metal in Different Zones of Welded Trunk Pipelines Made of X80 Strength Grade Steel // Materials Research Forum LLC. 2022. Vol. 21. P. 396-402. [10.21741/9781644901755-67].
    WoS 

  90. Kazakov A.L. Spevak L.F. Constructing Exact and Approximate DiffusionWave Solutions for a Quasilinear Parabolic Equation with Power Nonlinearities // Mathematics. 2022. Vol. 10. P. 1559. [10.3390/math10091559].
    WoS 

  91. Savrai R.A. Toporova D.V. Bykova (Gurchenko) T.M. Improving the quality of AISI H13 tool steel produced by selective laser melting // Optics and Laser Technology. 2022. V. 152. Art. 108128. [10.1016/j.optlastec.2022.108128].
    WoS 

  92. Goruleva L.S. Prosviryakov E.Yu. A New Class of Exact Solutions to the Navier–Stokes Equations with Allowance for Internal Heat Release // Optics and Spectroscopy. 2022. Vol.7. P. 15-20. [10.1134/S0030400X22070037].
    WoS 

  93. Gervasyev M. A. Estemirova S.Kh. Mushnikov A.N. Sharapova V.A. Gusev A.A. Bashirova M.A. Changes in the Phase Composition of High-Manganese Steels during Tensile Deformation // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 32-36. [10.1134/S0031918X22010057].
    WoS 

  94. Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and Properties of a SHS Cu–Ti–C–B Composite // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 43-49. [10.1134/S0031918X22010100].
    WoS 

  95. Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Khudorozhkova Yu.V. Constructing a two-level computational model of cross-ply fiberglass-reinforced plastic from micromechanical testing // Polymers and Polymer Composites. 2022. Vol. 30. P. 1–13. [10.1177/09673911221112414].
    WoS 

  96. Farber V.M. Morozova A.N. Khotinov V.A. Vichuzhanin D.I. Karabanalov M.S. Veretennikova (Golubkova) I.A. Lüders Deformation in Specimens Made of Normalized 09G2S Steel // Procedia Structural Integrity. 2022. Vol. 40. P. 129-135. [10.1016/j.prostr.2022.04.017].
    WoS 

  97. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Features of selecting boundary conditions when describing flows of stratified fluids // Procedia Structural Integrity. 2022. Vol. 40. P. 75-81. [10.1016/j.prostr.2022.04.009].
    WoS 

  98. Burmasheva N.V. Prosviryakov E.Yu. Isothermal shear flows of viscous vortex fluids in a thin slit // Procedia Structural Integrity. 2022. Vol. 40. P. 85-89. [10.1016/j.prostr.2022.04.010].
    WoS 

  99. Emelyanov I.G. Determination of the limiting state of the muffle shell // Procedia Structural Integrity. 2022. Vol. 40. P. 124-128. [10.1016/j.prostr.2022.04.016].
    WoS 

  100. Goruleva L.S. Prosviryakov E.Yu. Inhomogeneous Couette–Poiseuille shear flow // Procedia Structural Integrity. 2022. Vol. 40. P. 171-179. [10.1016/j.prostr.2022.04.023].
    WoS 

  101. Kanakin V.S. Smirnov A.S. Konovalov A.V. Neural network modeling of the flow stress of the AlMg6/10% SiC metal matrix composite under deformation at high temperatures // Procedia Structural Integrity. 2022. Vol. 40. P. 194-200. [10.1016/j.prostr.2022.04.026].
    WoS 

  102. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Character of Fracture after Cross-Bending of the SHS Composite by the Fe-Ni-Ti-C-B System // Procedia Structural Integrity. 2022. Vol. 40. P. 372-377. [10.1016/j.prostr.2022.04.050].
    WoS 

  103. Smirnov S.V. Myasnikova M.V. Numeral Simulation of Damage and Fracture in Structurally Inhomogeneous Materials Subjected to Deformation // Procedia Structural Integrity. 2022. Vol. 40. P. 378-384. [10.1016/j.prostr.2022.04.051].
    WoS 

  104. Zadvorkin S.M. Povolotskaya A.M. Detecting plastic strain localization zones in steel products by the results of magnetic measurements // Procedia Structural Integrity. 2022. Vol. 40. P. 455-460. [10.1016/j.prostr.2022.04.062].
    WoS 

  105. Zalazinskiy A.G. Dvoynikov D.A. Titov V.G. Application of a genetic algorithm for multi-criteria optimization of composite pressing // Procedia Structural Integrity. 2022. Vol. 40. P. 461-469. [10.1016/j.prostr.2022.04.063].
    WoS 

  106. Osipova V.A. Gorbunova T.I. Barabanov M.A. Mekhaev A.V. Vichuzhanin D.I. Smirnov S.V. Pestov A.V. New Epoxy Resin Polymerization Catalysts Based on N,N-Dimethylaminoalkylamides of Perfl uoroalkanoic Acids // Russian Journal of Applied Chemistry. 2022. Vol. 95. No. 1. P. 53-58. [10.1134/S1070427222010074].
    WoS 

  107. Povolotskaya A.M. Mushnikov A.N. Features of Behavior of Magnetic Properties during Elastic Deformation of 20GN Hull Steel in Various Initial Stress–Strain States // Russian Journal of Nondestructive Testing. 2022. V. 58. P. 1000-1010. [10.1134/S1061830922700073].
    WoS 

  108. Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil'mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Effect of oxygen in surface layers formed during sliding wear of Ni–ZrO2 coatings // Surface and Coatings Technology. 2022. Vol. 434. Art. 128174. [10.1016/j.surfcoat.2022.128174].
    WoS 

  109. Savrai R.A. Skorynina P.A. Structural-phase transformations and changes in the properties of AISI 321 stainless steel induced by liquid carburizing at low temperature // Surface and Coatings Technology. 2022. V. 443. Art. 128613. [10.1016/j.surfcoat.2022.128613].
    WoS 

  110. Putilova E. A. Kryucheva K. D. Influence of Elastic–Plastic Deformation on the Structure and Magnetic Characteristics of 13Cr-V Alloyed Steel Pipe // Symmetry. 2022. №14. P.1201. [10.3390/sym14061201].
    WoS 

  111. Privalova V.V. Prosviryakov E.Yu. A New Class of Exact Solutions of the Oberbeck–Boussinesq Equations Describing an Incompressible Fluid // Theoretical Foundations of Chemical Engineering. 2022. V. 56. P. 331–338. [10.1134/S0040579522030113].
    WoS 

  112. Vandyshev A.B. Kulikov V.A. Example of Design Calculation of a Membrane-Catalytic Device for Production of High-Purity Hydrogen from Hydrocarbon Raw Materials // Chemical and Petroleum Engineering. 2022. Vol. 57. Nos. 9-10. P. 740-746. [10.1007/s10556-022-01001-7].
    WoS 

  113. Sergeev S.N. Safarov I.M. Galeev R.M. Gladkovsky S.V. Increase in Low-Carbon Steel 12GBA Strength and Cold Resistance by a Deformation-Thermal Effect // Metal Science and Heat Treatment. 2022. Vol. 64. P. 295–300. [10.1007/s11041-022-00804-y].
    WoS 

  114. Zhilyakov A.Yu. Khristolyubov A.S. Potekhin B.A. Usoltsev E.A. Soboleva N.N. Effect of Heat Treatment on the Structure and Properties of Composite Bronzes Reinforced with Steel Dendrites // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00819-5].
    WoS 

  115. Farber V.M. Morozova A.N. Vichuzhanin D.I. Zhilyakov A.Yu. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part II. Deformation Zone // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00825-7].
    WoS 

  116. Shveikin V.P. Kuznetsov V.P. Kamantsev I.S. Senaeva (Pugacheva) E.I. Kuznetsov S.V. Effect of Heat Treatment on the Structure and Mechanical Properties of Tool Steel 1.6% C – 12% Cr – 0.8% Mo – 0.9% V // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00828-4].
    WoS 

  117. Kamantsev I.S. Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Y. Effect of Hydrogen Sulfide Containing Environment on the Characteristics of Strength, Cyclic Endurance and Magnetic Properties of Cr – Mo – V – Nb Pipe Steel // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00823-9].
    WoS 

  118. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to the Navier – Stokes Equations for Describing the Convective Flows of Multilayer Fluids / Russian Journal of Nonlinear Dynamics. 2022. Vol. 18. - no. 3. P. 397-410. [10.20537/nd220305].
    Scopus 

  119. Babaylov N.A. Loginov Yu.N. Polyanskiy L.I. Influence of the gap between the rolls on parameters of the roll briquetting of metallurgical lime and magnesium oxide // Chernye Metally. 2022. Iss. 6 (1086). P. 9-14. [10.17580/chm.2022.06.02].
    Scopus 

  120. Byval’tsev S. V. Zalazinskiy A.G. Titov V.G. Shveikin V.P. Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites // Key Engineering Materials. 2022. Vol. 910. P. 450-457. [10.4028/p-8i1j79].
    Scopus 

  121. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations // Key Engineering Materials. 2022. Vol. 910. P. 988-993. [10.4028/p-s935r3].
    Scopus 

  122. Taratorkin A.I. Zhuk A. Rudnev A. Chernyshev N. Butuzov D. Golubev  M. Fomin N. Elimination of Off-Design Operating Modes for Multiplate Clutches of Vehicle Transmission // SAE Technical Paper. 2022. 2022-01-5012. [10.4271/2022-01-5012].
    Scopus 

  123. Byval’tsev S. V. Titanium Drawing // Key Engineering Materials. 2022. Vol. 910. P. 193-199. [10.4028/p-1vn56i].
    Scopus 

  124. Gorshkov A.V. Prosviryakov E.Yu. Stagnation points of an inhomogeneous solution describing convective Ekman flow in the oceanic equatorial zone // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 52–66. [10.17804/2410-9908.2022.1.052-066].

  125. Goruleva L.S. Prosviryakov E.Yu. Unidirectional Steady-State Inhomogeneous Couette Flow with a Quadratic Velocity Profile Along a Horizontal Coordinate // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 3. P. 47-60. [10.17804/2410-9908.2022.3.047-060].

  126. Goruleva L.S. Zadvorkin S.M. Mushnikov A.N. Effect of Plastic Deformation on the Phase Composition and Electromagnetic Characteristics of the 321n Austenitic Steel (08kh18n10t) // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 95-106. [10.17804/2410-9908.2022.6.095-106].

  127. Kazakov A.L. Spevak L.F. Chuev N.P. An analytical and numerical study of free boundary dynamics for an isolated mass of a self-gravitating gas // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 61–80. [10.17804/2410-9908.2022.4.061-080].

  128. Klimova O.V. An Optimization Approach to the Development of Parallel Algorithms for Digital Signal Processing Operations // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 1. P. 6-15. [10.17804/2410-9908.2022.1.006-015].

  129. Mushnikov A.N. Zadvorkin S.M. Perunov E.N. Vyskrebencev S.V. Izmajlov R.F. Vichuzhanin D.I. Soboleva N.N. Igumnov A.S. Experimental facility for studying the physical properties of materials in a plane stress state // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 50-60. [10.17804/2410-9908.2022.4.050-060].

  130. Pugacheva (Vandysheva) N.B. Polyakov P.A. The effect of boron on the protective properties of aluminide coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 25–34. [10.17804/2410-9908.2022.6.025-034].

  131. Putilova E. A. Goruleva L.S. Zadvorkin S.M. Effect of Frictional Treatment of the Aisi 321 Steel on the Change of Its Hardness and Magnetic Characteristics // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 40-49. [10.17804/2410-9908.2022.5.040-049].

  132. Soboleva N.N. Davydova (Pozdejeva) N.A. Makarov A.V. The Effect of the multiplicity of frictional action on the micromechanical properties of NiCrBSi-coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 50-59. [10.17804/2410-9908.2022.5.050-059].

  133. Struzhanov V.V. On one model of deformation in laminated composites // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 16–24. [10.17804/2410-9908.2022.1.016-024].

  134. Vandyshev A.B. Estimating the effect of some individual technological factors on the effectiveness of producing high-purity hydrogen from hydrocarbons in catalytic membrane devices // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 6–36. [10.17804/2410-9908.2022.4.006-036].

  135. Nikolin Yu.V. Vichuzhanin D.I. Pugacheva (Vandysheva) N.B. Mezin F.I. Studying the adhesion strength of plasma powder metal coatings on the surface of graphite // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 23–39. [10.17804/2410-9908.2022.5.023-039].

  136. Struzhanov V.V. Chaikin A.E. Destruction of a protective pipe coating under cyclic loading by internal pressure // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 2. P. 55– 66. [10.17804/2410-9908.2022.2.055-066].

  137. Hoodorozhkov S. Yurkevich A.V. Theoretical and Experimental Study of the Vehicle’s Dynamics Equipped with the Mechanical Stepless Transmission // Lecture Notes in Networks and Systems. 2022. Vol. 509. P. 787-796. [10.1007/978-3-031-11058-0_79].

  138. Ershkov S.V. Prosviryakov E.Yu. Leshchenko D. Flow of a Viscous Incompressible Fluid from a Moving Point Source // Symmetry. 2022. No. 14. 2156 p. [10.3390/ sym14102156].

  139. Prosviryakov E.Yu. Goruleva L.S. Nonuniform Couette–Poiseuille Shear Flow with a Moving Lower Boundary of a Horizontal Layer // Technical Physics Letters. 2022. Vol. 48. Iss. 9. P. 450-454. [10.1134/S1063785022090024].

  140. Salikhyanov D.R. Veselova V.E. Volkov V. Flow Behavior and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Produced by Selective Laser Melting Compared to Wrought // International Journal of Advanced Manufacturing Technology. 2021. https://doi.org/10.1007/s00170-021-08000-7.
    WoS  Scopus 

  141. Savrai R.A. Kogan L.Kh. Eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact-fatigue loading // Russian Journal of Nondestructive Testing. 2021. V. 57. No. 5. P. 393-400. DOI: 10.1134/S1061830921050119.
    WoS  Scopus  in Russian

  142. Mironov V.I. Emelyanov I.G. Lukashuk O.A. Criteria of material failure in relation to hydrogen saturation // Solid State Phenomena. 2021. Vol. 316 SSP. P. 484-489. 2-s2.0-85106165052&origin=inward&txGid=7f9ba3c5bd161f4e44bc73789203a5c9. DOI: 10.4028/www.scientific.net/SSP.316.484.
    WoS  Scopus 

  143. Bashurov V.V. Prosviryakov E.Yu. Steady thermo-diffusive shear Couette flow of incompressible fluid. Velocity field analysis // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2021. Vol. 25. Iss. 4. P. 781-793. DOI: https://doi.org/10.14498/vsgtu1878.
    WoS  Scopus  in Russian

  144. Burmasheva N.V. Prosviryakov E.Yu. Exact solutions to the Navier–Stokes equations describing stratified fluid flows // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2021. Vol. 25. Iss. 3. P. 491-507. DOI: https://doi.org/10.14498/vsgtu1860.
    WoS  Scopus 

  145. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. A Couette-Type Flow with a Perfect Slip Condition on a Solid Surface // Vestnik Tomskogo gosudarstvennogo universiteta, Matematika i mekhanika [Tomsk State University Journal of Mathematics and Mechanics]. 2021. Iss. 74. P. 79-94. DOI 10.17223/19988621/74/9.
    WoS  Scopus  in Russian

  146. Prosviryakov E.Yu. Recovery of radial-axial velocity in axisymmetric swirling flows of a viscous incompressible fluid in the Lagrangian consideration of vorticity evolution // VESTNIK UDMURTSKOGO UNIVERSITETA-MATEMATIKA MEKHANIKA KOMPYUTERNYE NAUKI. 2021. Vol. 31. Iss. 3. P. 505-516. DOI: 10.35634/vm210311.
    WoS  Scopus  in Russian

  147. Byval’tsev S. V. Experiment planning subsystem for intellectual system of improvement of pressure processing processes // AIP Conference Proceedings. 2021. Vol. 2402. 070017. https://doi.org/10.1063/5.0071581.
    WoS  Scopus 

  148. Byval’tsev S. V. Iskritskiy A.I. Augmented Reality on the Internet of Things // AIP Conference Proceedings. 2021. Vol. 2402. 050009. https://doi.org/10.1063/5.0071579.
    WoS  Scopus 

  149. Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Kanakin V.S. Using the Instrumented Indentation Technique to Determine Damage in Sintered Metal Matrix Composites after High-Temperature Deformation // Applied Sciences-Basel. 2021. Vol. 11. Iss. 22. 10590. https://doi.org/10.3390/app112210590.
    WoS  Scopus 

  150. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to the Oberbeck–Boussinesq Equations for Shear Flows of a Viscous Binary Fluid with Allowance Made for the Soret Effect // BULLETIN OF IRKUTSK STATE UNIVERSITY-SERIES MATHEMATICS. 2021. Vol. 37. P. 17-30. https://doi.org/10.26516/1997-7670.2021.37.17.
    WoS  Scopus  in Russian

  151. Ershkov S.V. Prosviryakov E.Yu. Burmasheva N.V. Christianto Victor Towards understanding the algorithms for solving the Navier–Stokes equations // Fluid Dynamics Research. 2021. Vol. 53. 044501. https://doi.org/10.1088/1873-7005/ac10f0.
    WoS  Scopus 

  152. Illarionov A.G. Vodolazskiy F.V. Barannikova N.A. Kosmatskiy Ya.I. Khudorozhkova Yu.V. Khudorozhkova. Influence of phase composition on thermal expansion of Ti-0.4Al, Ti-2.2Al-2.5Zr and Ti-3Al-2.5V alloys // Journal of Alloys and Compounds. 2021. Vol. 857. 158049. – https://doi.org/10.1016/j.jallcom.2020.158049.
    WoS  Scopus 

  153. Zadvorkin S.M. Goruleva L.S. Evaluation of Residual Stresses in Steel Products Using Magnetic Methods // Journal of Machinery Manufacture and Reliability. 2021. No. 2. P. 118-132. DOI: 10.3103/S1052618821020151.
    WoS  Scopus  in Russian

  154. Menshakov A.I. Bruhanova Yu.A. Surkov Yu.S. Skorynina P.A. Investigation of the plasma composition of a discharge with a self-heating hollow cathode and an active anode in a gas mixture with titanium and hexamethyldisilazane vapors // Journal of Physics: Conference Series. 2021. V. 2064. 012046. doi: 10.1088/1742-6596/2064/1/012046.
    WoS  Scopus 

  155. Menshakov A.I. Bruhanova Yu.A. Skorynina P.A. Obtaining of TiSiCN coatings by anodic evaporation of titanium and decomposition of hexamethyldisilazane in a low-pressure arc discharge // Journal of Physics: Conference Series. 2021. V. 1954. 012032. doi: 10.1088/1742-6596/1954/1/012032.
    WoS  Scopus 

  156. Saraev Yu.N. Kamantsev I.S. Grigoryeva A.A. Kuznetsov A.V. Nepomnyashchiy A.S. Finding ways to improve the performance of welded joints based on controlled heat input and use of shock-mechanical treatment // Journal of Physics: Conference Series. 2021. Vol. 1791. 012118. doi: 10.1088/1742-6596/1791/1/012118.
    WoS  Scopus 

  157. Lezhnin N.V. Makarov A.V. Kuznetsov V.P. Vladimirov A.B. Skorynina P.A. Sirosh V.A Adhesion strength of Ti1-xCx – DLC multilayer nanocomposite thin films coated by ion-plasma deposition on martensitic stainless steel produced by selective laser melting followed by plasma-nitriding and burnishing // Journal of Physics: Conference Series. 2021. V. 2064. – 012082. doi: 10.1088/1742-6596/2064/1/012082.
    WoS  Scopus 

  158. Kazakov A.L. Lempert A.A. Spevak L.F. On an exact solution to the nonlinear heat equation with a source // Journal of Physics: Conference Series. 2021. Vol. 1847. 012006. doi:10.1088/1742-6596/1847/1/012006.
    WoS  Scopus 

  159. Makarov A.V. Kuznetsov V.P. Skorynina P.A. Sirosh V.A. Vladimirov A.B. Lezhnin N.V. Kolmakov S.V. Plasma nitriding in complex post-processing of stainless steel parts obtained by additive laser technology // Journal of Physics: Conference Series. 2021. V. 2064. 012075. doi: 10.1088/1742-6596/2064/1/012075.
    WoS  Scopus 

  160. Ogorelkov D. A. Lukashuk O.A. Forecasting the life of a structure relative to the operating mode // Journal of Physics: Conference Series.. 2021. V. 2094. 042061. doi: 10.1088/1742-6596/2094/4/042061.
    WoS  Scopus 

  161. Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Brittle fracture resistance and damping properties of layered metal-polymer composites // Letters on Materials. 2021. Vol. 11. Iss. 3. P. 279-284. DOI: https://doi.org/10.22226/2410-3535-2021-3-279-284.
    WoS  Scopus  in Russian

  162. Savrai R.A. Osinceva A.L. Effect of hardened surface layer obtained by frictional treatment on the contact endurance of the AISI 321 stainless steel under contact gigacycle fatigue tests // Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021. Vol. 802. – Art. 140679. P. 1-10. DOI: 10.1016/j.msea.2020.140679.
    WoS  Scopus 

  163. Mironov V.I. Lukashuk O.A. Ogorelkov D. A. On Durability of Structurally Inhomogeneous Materials // Materials Science Forum. 2021. Vol. 1031. P. 24-30. doi:10.4028/www.scientific.net/MSF.1031.24.
    WoS  Scopus 

  164. Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 2035-2037. https://doi.org/10.1016/j.matpr.2020.10.039.
    WoS  Scopus 

  165. Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Heat treatment effect on ledeburite alloys wear resistance // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 1810-1812. https://doi.org/10.1016/j.matpr.2020.08.417.
    WoS  Scopus 

  166. Dvoynikov D.A. Gladkovsky S.V. Multi-Criteria Selection of Quantitative Composition of Alloying Elements of Maraging Steels of the Fe–Cr–Ni–Mo System with an Improved Set of Mechanical Properties // Metallurgist. 2021. Vol. 65. Nos. 5-6. P. 522-528. DOI: 10.1007/s11015-021-01186-x.
    WoS  Scopus  in Russian

  167. Sergeev S.N. Safarov I.M. Zhilyaev A.P. Galeev  R.M. Gladkovsky S.V. Dvoynikov D.A. Effect of Deformation-Thermal Processing on the Microstructure and Mechanical Properties of Low-Carbon Structural Steel // Physics of Metals and Metallography. 2021. Vol. 122. No. 6. P. 621-627. DOI: 10.1134/S0031918X21060090.
    WoS  Scopus  in Russian

  168. Kruchkov D.I. Smirnov S.V. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Influence of All-Round Forging under Short-Term Creep Conditions on the Structure and Mechanical Properties of the Al7075/10SiCp Composite with an Aluminum Matrix // Physics of Metals and Metallography. 2021. Vol. 122. No. 10. P. 981-990. DOI: 10.1134/S0031918X21100069.
    WoS  Scopus  in Russian

  169. Pugacheva (Vandysheva) N.B. Kruchkov D.I. Nesterenko A.V. Smirnov S.V. Shveikin V.P. Studying the Short-Term High-Temperature Creep in the Al–6Zn–2.5Mg–2Cu/10SiCp Aluminum Matrix Composite // Physics of Metals and Metallography. 2021. Vol. 122. No. 8. P. 782-788. DOI: 10.1134/S0031918X21080111.
    WoS  Scopus  in Russian

  170. Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Yu. A Study of the Structure and Physicomechanical Properties of Promising High-Strength Economically Alloyed Steel for Oil and Gas Production Pipes Operating under Extreme Conditions // Physics of Metals and Metallography. 2021. Vol. 122. No. 9. P. 923-930. DOI: 10.1134/S0031918X21090118.
    WoS  Scopus  in Russian

  171. Savrai R.A. Kolobyilin Yu.M. Volkova E.G. Micromechanical characteristics of the surface layer of metastable austenitic steel after frictional treatment // Physics of Metals and Metallography. 2021. V. 122. No. 8. P. 800-806. DOI: 10.1134/S0031918X21080123.
    WoS  Scopus  in Russian

  172. Smirnov A.S. Khudorozhkova Yu.V. Konovalov A.V. Degradation of the Mechanical Properties of Fiberglass Under Discontinuous High-Temperature Loading // Procedia Structural Integrity. 2021. Vol. 32. P. 321-325. DOI: 10.1016/j.prostr.2021.09.046.
    WoS  Scopus 

  173. Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov Aleksander Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State // Procedia Structural Integrity. 2021. Vol. 33. P. 259-264. DOI: 10.1016/j.prostr.2021.10.032.
    WoS  Scopus 

  174. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. The Effect of Cyclic Preloading on the Magnetic Behavior of the Hot-Rolled 08G2B Steel Under Elastic Uniaxial Tension // Research in Nondestructive Evaluation. 2021. Vol. 32. No. 6. P. 276-294. DOI: 10.1080/09349847.2021.2002487.
    WoS  Scopus 

  175. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions for Steady Convective Layered Flows with a Spatial Acceleration // Russian Mathematics. 2021. Vol. 65. No. 7. P. 8-16. DOI: 10.3103/S1066369X21070021.
    WoS  Scopus  in Russian

  176. Privalova V.V. Prosviryakov E.Yu. Layered Marangoni convection with the Navier slip condition // SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES. 2021. Vol. 46. Iss. 1. Article number: 55. https://doi.org/10.1007/s12046-021-01585-5.0.
    WoS  Scopus 

  177. Savrai R.A. Morozova A.N. A review of studies in the field of production of coatings on metals by means of mechanical alloying // Surfaces and Interfaces. 2021. V. 27. Art. 101451. https://doi.org/10.1016/j.surfin.2021.101451.
    WoS  Scopus 

  178. Ershkov S.V. Rachinskaya A. Prosviryakov E.Yu. Shamin R.V. On the Semi-Analytical Solutions in Hydrodynamics of Ideal Fluid Flows Governed by Large-Scale Coherent Structures of Spiral-Type // Symmetry-Basel. 2021. Vol. 13. Article ID 2307. https://doi.org/ 10.3390/sym13122307.
    WoS  Scopus 

  179. Baranovskii E.S. Burmasheva N.V. Prosviryakov E.Yu. Exact solutions to the Navier-Stokes equations with couple stresses // Symmetry-Basel. 2021. V. 13. No. 8. Article ID 1355. https://doi.org/10.3390/sym13081355.
    WoS  Scopus 

  180. Vladimirov A.P. Drukarenko N.A. Myznov K.E. Using Speckle Images for Determining the Local Plastic Strains Arising at High-Cycle Fatigue of 09G2S Steel // Technical Physics Letters. 2021. Vol. 47. No. 8. P. 773–776. DOI: 10.1134/S1063785021080137.
    WoS  Scopus  in Russian

  181. Emelyanov I.G. Mironov V.I. Strength of Shell Structure Operating in Hydrogenous Media under Pressure // Transportation Research Procedia. 2021. Vol. 54. P. 484-494. 10.1016/J.TRPRO.2021.02.099.
    WoS  Scopus 

  182. Lebedev P.D. Kazakov A.L. Iterative algorithms for constructing the thinnest coverings of polyhedra by sets of different balls // Trudy Instituta Matematiki i Mekhaniki URO RAN. 2021. Vol. 27. No. 1. P. 116–129. DOI: 10.21538/0134-4889-2021-27-1-116-129.
    WoS  Scopus  in Russian

  183. Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil’mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Tribological performance of boron-based superhard coatings sliding against different materials // Wear. 2021. Vol. 477. 203835. https://doi.org/10.1016/j.wear.2021.203835.
    WoS  Scopus 

  184. Vandyshev A.B. Kulikov V.A. Analysis of Parameters for Producing High-Purity Hydrogen from Natural Gas in a Tubular Type Membrane-Catalytic Module // Chemical and Petroleum Engineering. 2021. Vol. 56. Nos. 9-10. P. 715-720. DOI: 10.1007/s10556-021-00833-z.
    WoS  Scopus  in Russian

  185. Vandyshev A.B. Kulikov V.A. Assessment of the Effect of Hydrocarbon and Steam Mixture Flow Rate on the Main Parameters of High-Purity Hydrogen Production in a Membrane-Catalytic Device with a Fixed Membrane Area // Chemical and Petroleum Engineering. 2021. Vol. 57. Nos. 7-8. P. 639-646. DOI: 10.1007/s10556-021-00989-8.
    WoS  Scopus  in Russian

  186. Vandyshev A.B. Kulikov V.A. Assessment of the Effects of Temperature and Pressure on the Efficiency of High-Purity Hydrogen Production from Hydrocarbon Feedstocks in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2021. Vol. 56. No. 9-10. P. 799-808. DOI: 10.1007/s10556-021-00845-9.
    WoS  Scopus  in Russian

  187. Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for Couette-Type Steady Convective Concentration Flows // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 7. P. 155-166. DOI: 10.1134/S0021894421070051.
    WoS  Scopus  in Russian

  188. Kazakov A.L. Spevak L.F. Exact and approximate solutions of a problem with a singularity for a convection–diffusion equation // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 1. P. 18-26. DOI: 10.1134/S002189442101003X.
    WoS  Scopus  in Russian

  189. Kazakov A.L. Spevak L.F. Exact and Approximate Solutions to the Degenerated Reaction-Diffusion System // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 4. P. 673-683. DOI: 10.1134/S0021894421040179.
    WoS  Scopus  in Russian

  190. Alwan H.L. Makarov A.V. Soboleva N.N. Korobov Yu.S. Shumyakov V.I. Lezhnin N.V. Zavalishin V.A. Using a Procedure for Estimating Cavitation Impact for Analyzing the Erosion Resistance of Cermet Thermal Sprayed Coatings // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 778-784. DOI: 10.3103/S1067821221060031.
    WoS  Scopus  in Russian

  191. Soboleva N.N. Makarov A.V. Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 682-691. DOI: 10.3103/S1067821221060183.
    WoS  Scopus  in Russian

  192. Korobov Yu.S. Alwan H.L. Filippov M.A. Soboleva N.N. Alani I.A. Estemirova S.Kh. Makarov A.V. Sirosh V.A. The effect of martensitic transformation on the cavitation erosion resistance of a TIG-deposited Fe-Cr-C-Al-Ti layer // Surface and Coatings Technology. 2021. Vol. 421. 127391. https://doi.org/10.1016/j.surfcoat.2021.127391.
    WoS  Scopus 

  193. Alwan H.L. Korobov Yu.S. Elkind D.M. Sirosh V.A. Makarov A.V. Comparative analysis of cavitation resistance of deposited/sprayed layers of carbides, stainless steels and metastable austenite // IOP Conference Series: Materials Science and Engineering. 2021. Vol. 1079. 052073. DOI: 10.1088/1757-899X/1079/5/052073.
    WoS 

  194. Soldatkin V.A. Yurkevich A.V. Tereshin A.V. Determining the Drive Power of the System Controlling the Vibration Amplitude of the Rectifiers for the Continuously Variable Mechanical Transmission with Internal Force Functions // MATEC Web of Conferences. 2021. Vol. 346. 03062. https://doi.org/10.1051/matecconf /202134603062.
    WoS 

  195. Taratorkin I.A. Vyaznikov M.V. Vyaznikov A.M. Increasing Mobility of Tracked Vehicles during Curvilinear Motion by Redistributing Power Flows // MATEC Web of Conferences. 2021. Vol. 346. 03099. https://doi.org/10.1051/matecconf/202134603099.
    WoS 

  196. Yurkevich A.V. Yurkevich L. The Specifics of Calculating the Efficiency of the Continuously Variable Mechanical Transmission with Oscillatory Movement of Internal Links and Force Function Control // MATEC Web of Conferences. 2021. Vol. 346. 03061. https://doi.org/10.1051/matecconf /202134603061.
    WoS 

  197. Guzanov B.N. Pugacheva (Vandysheva) N.B. Slukin E.Yu. Bykova (Gurchenko) T.M. Technology of Obtaining Composite Conglomerate Powders for Plasma Spraying of High-Temperature Protective Coatings // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 1. P. 6-20. DOI: 10.17212/1994-6309-2021-23.1-6-20.
    WoS  in Russian

  198. Pugacheva (Vandysheva) N.B. Nikolin Y. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Influence of the chemical composition of the matrix on the structure and properties of monolithic SHS composites // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 3. P. 124-138. DOI: 10.17212/1994-6309-2021-23.3-124-138.
    WoS  in Russian

  199. Yurkevich A.V. Tereshin A.V. Soldatkin V.A. Experimental Characteristics of Mechanical Continuously Variable Transmission with Internal Force Functions // Science & Technique. 2021. Vol. 20. No. 4. P. 310–319. https://doi.org/10.21122/2227-1031-2021-20-4-310-319.
    WoS  in Russian

  200. Babaylov N.A. Loginov Yu.N. Polyanskiy  L.I. Nature of Fine Materials Compaction When Roll Briquetting in Cells of Different Shapes // Chernye Metally. 2021. Iss. 2 (1070). P. 39-44. DOI: 10.17580/chm.2021.02.07.
    Scopus  in Russian

  201. Starikova U.S. Soboleva N.N. Makarov A.V. Kharanzhevsky E.V. The influence of boron carbide additive on the structure and hardness of a nickel-based coating // Frontier Materials & Technologies. 2021. No. 4. P. 89–97. DOI: 10.18323/2782-4039-2021-4-89-97.
    Scopus  in Russian

  202. Skorynina P.A. Makarov A.V. Berezovskaya V.V. Merkushkin E.A. Chekan N.M. Effect of nanostructuring frictional treatment on micromechanical and corrosion properties of stable austenitic chromium-nickel steel // Frontier Materials & Technologies. 2021. No. 4. P. 80–88. DOI: 10.18323/2782-4039-2021-4-80-88.
    Scopus  in Russian

  203. Petrova (Kuteneva) S.V. Gladkovsky S.V. Nedzvetsky P.D. Veselova V.E. Investigation of Mechanical Behavior of Layered Metal-Rubber Composites Based on Steel and Aluminum Alloy // Key Engineering Materials. 2021. Vol. 902. P. 87-95. https://doi.org/10.4028/www.scientific.net/KEM.902.87.
    Scopus 

  204. Putilova E. A. Kryucheva K.D. Zadvorkin S.M. Peculiarities of Structure and Physical-Mechanical Properties of High-Strength Cr-Mo Pipe Steel Applicative Mainly in a Sour Environment // Key Engineering Materials. 2021. Vol. 902. P. 29-34. https://doi.org/10.4028/www.scientific.net/KEM.902.29.
    Scopus 

  205. Goruleva L.S. Prosviryakov E.Yu. The Couette Poiseuille Inhomogeneous Shear Flow with the Motion of the Lower Boundary of the Horizontal Layer // Chemical Physics and Mesoscopy. 2021. Vol. 23. No. 4. P. 403-411. DOI: 10.15350/17270529.2021.4.36.
    РИНЦ  VAC list  in Russian

  206. Konovalov A.V. Kanyukov S.I. Muizemnek O.Yu. A genetic algorithm for estimating preheat numbers for forging shafts on presses // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2021. No. 5. P. 25-34. DOI: 10.18411/2021-0005-2534-12345.
    РИНЦ  VAC list  in Russian

  207. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Peculiarities of Magnetic Behavior of Low-Alloy Structural Steel Specimens Under Elastic Deformation After Preliminary Cyclic Loading // Materials Science. Power Engineering. 2021. No. 3. P. 86-96. DOI: 10.18721/JEST.27308.
    РИНЦ  VAC list  in Russian

  208. Kazakov A.L. Kuznetsov P.A. Spevak L.F. Construction of solutions to the boundary value problem with singularityfor a nonlinear parabolic system // Siberian Journal of Industrial Mathematics. 2021. Vol. 24. No. 4. P. 64-78. DOI: 10.33048/SIBJIM.2021.24.405.
    РИНЦ  VAC list  in Russian

  209. Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Erosion Resistance of a Combined Multilayer Coating Protecting Critical Parts of Modern Gas Turbine Engines [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 6-21. DOI: 10.17804/2410-9908.2021.2.006-021.
    РИНЦ 

  210. Burmasheva N.V. Prosviryakov E.Yu. A Class of Exact Solutions with Spatial Acceleration for the Description of Viscous Incompressible Fluid Flows in the Field of Mass Forces [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 6-25. DOI: 10.17804/2410-9908.2021.1.006-025.
    РИНЦ 

  211. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions of the Navier–stokes Equations for Describing an Isobaric One-Directional Vertical Vortex Flow of a Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 30-51. DOI: 10.17804/2410-9908.2021.2.030-051.
    РИНЦ 

  212. Gorshkov A.V. Prosviryakov E.Yu. Analytical Study of the Ekman Angle for the Benard–marangoni Convective Flow of Viscous Incompressible Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 4. P. 34-49. DOI: 10.17804/2410-9908.2021.4.34-49.
    РИНЦ 

  213. Kazakov A.L. Spevak L.F. On the Construction of a Heat Wave Generated by a Boundary Condition on a Moving Border [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 6. P. 54-67. DOI: 10.17804/2410-9908.2021.6.054-067.
    РИНЦ 

  214. Kruchkov D.I. Zalazinskiy A.G. Model Representation of An Axisymmetric Steel-Aluminum Sample for Simulation of a Separation Test [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 26-37. DOI: 10.17804/2410-9908.2021.1.026-037.
    РИНЦ 

  215. Prosviryakov E.Yu. Gravitational Principle of Minimum Pressure for Incompressible Flows [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 22-29. DOI: 10.17804/2410-9908.2021.2.022-029.
    РИНЦ 

  216. Prosviryakov E.Yu. Burmasheva N.V. Analysis of Specific Kinetic Energy for the Birikh–ostroumov Shear Diffusion Flow [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 55-70. DOI: 10.17804/2410-9908.2021.3.055-070.
    РИНЦ 

  217. Pugacheva (Vandysheva) N.B. Guzanov B.N. Studying the chemical and phase compositions of a chromium-nickel-manganese steel after operation at elevated temperatures in corrosive environments // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 17–30. DOI: 10.17804/2410-9908.2021.3.017-030.
    РИНЦ 

  218. Savrai R.A. Gladkovsky S.V. Lepikhin S.V. Kolobyilin Yu.M. Approaches to the Development of Wear-Resistant Laminated Metal Composites [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 5. P. 24-35. DOI: 10.17804/2410-9908.2021.5.24-35.
    РИНЦ 

  219. Solovei V.D. The Strain and Strain Rate Dependence of the Yield Stress of Aluminum [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 51-54. DOI: 10.17804/2410-9908.2021.1.051-054.
    РИНЦ 

  220. Spevak L.F. Nefedova O.A. Parallel Technology for Solving Nonstationary Heat Conduction Problems in Axisymmetric Domains [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 5. P. 60-71. DOI: 10.17804/2410-9908.2021.6.60-71.
    РИНЦ 

  221. Struzhanov V.V. On One Problem of Determining the Optimal Residual Stress Field [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 55-63. DOI: 10.17804/2410-9908.2021.1.055-063.
    РИНЦ 

  222. Struzhanov V.V. On the Rational Choice of the Properties of Structural Elements Constituting Unidirectional Compositions [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 45-54. DOI: 10.17804/2410-9908.2021.3.045-054.
    РИНЦ 

  223. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Evoluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations // International Journal “NDT Days”. 2021. Vol. IV. Iss. 1. P. 26-32.

  224. Kruchkov D.I. Zalazinskiy A.G. Kamantsev I.S. Berezin I.M. Simulation of Testing an Incised Multilayer Metal Composite Sample // AIP Conference Proceedings. 2020. Vol. 2315. 020025. https://doi.org/10.1063/5.0036702.
    WoS 

  225. Petrova (Kuteneva) S.V. Gladkovsky S.V. Dvoynikov D.A. Sergeev S.N. Microstructure and brittle fracture resistance of layered steel composites produced by explosion welding and pack rolling followed by heat treatment // Письма о материалах. 2020. Vol. 9. No. 4. P. 442-446. https://doi.org/10.22226/2410-3535-2019-4-442-446.
    VAC list 

  226. Burmasheva N.V. Prosviryakov E.Yu. Thermocapillary Convection of a Vertical Swirling Liquid // Theoretical Foundations of Chemical Engineering. 2020. Vol. 54. No. 1. P. 230–239. DOI: 10.1134/S0040579519060034.
    WoS  in Russian

  227. Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.
    WoS 

  228. Savrai R.A. Skorynina P.A. Makarov A.V. Osinceva A.L. Effect of liquid carburizing at lowered temperature on the micromechanical characteristics of metastable austenitic steel / Physics of Metals and Metallography. 2020. Vol. 121. No. 10. P. 1015-1020. DOI: 10.1134/S0031918X20100105.
    WoS  in Russian

  229. Karagergi  R.P. Yevseyev M.V. Konovalov A.V. Kozlov  A.V. The Effect of the Inhomogeneous Distribution of Ovalization-Induced Strain in a Ring on Its Mechanical Properties in Subsequent Elongation // AIP Conference Proceedings. 2020. Vol. 2315. 020020. https://doi.org/10.1063/5.0037125.
    WoS 

  230. Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Plotnikov G.N. Michurov N.S. Heat Treatment of Wear-Resistant Cast Iron at High and Low Temperatures // AIP Conference Proceedings. 2020. Vol. 2315. 050005. https://doi.org/10.1063/5.0037190.
    WoS 

  231. Filippov  A.A. Fomin  V.M. Veretennikova (Golubkova) I.A. Smirnov S.V. Investigation of elastic modulus of heterogeneous materials based on epoxy resin filled with silicon dioxide nanoparticles by nanoindentation // AIP Conference Proceedings. 2020. Vol. 2310. 020094. https://doi.org/10.1063/5.0034462.
    WoS 

  232. Syzrantseva  K.V. Lobkova T.E. Yurkevich A.V. A Method for Calculating the Strength Reliability of Mechanical Infinitely Variable Transmission Torsion Bars by Nonparametric Statistics Methods // AIP Conference Proceedings. 2020. Vol. 2315. 040043. https://doi.org/10.1063/5.0036695.
    WoS 

  233. Saraev  Yu.N. Kamantsev I.S. Perovskaya  M.V. Kuznetsov A.V. Semenchuk  V.M. Nepomnyashchiy  A.S. To the Estimation of Welded Joint Fatigue Fracture // AIP Conference Proceedings. 2020. Vol. 2315. 040031. https://doi.org/10.1063/5.0037091.
    WoS 

  234. Babaylov N.A. Shishin N.N. Interactive Software for Calculating Energy and Force Parameters of Metal Extrusion // AIP Conference Proceedings. 2020. Vol. 2315. 020005. https://doi.org/10.1063/5.0036719.
    WoS 

  235. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. A Layered Unidirectional Flow of a Viscous Incompressible Fluid Induced in a Closed Layer by a Nonuniform Distribution of Temperature and Pressure Fields, with Allowance for the Perfect Slip Condition // AIP Conference Proceedings. 2020. Vol. 2315. 020011. https://doi.org/10.1063/5.0036715.
    WoS 

  236. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Unidirectional Convective Flow of Viscous Incompressible Fluid in a Closed Horizontal Layer with the Perfect Slip Condition // AIP Conference Proceedings. 2020. Vol. 2315. 020010. https://doi.org/10.1063/5.0036714.
    WoS 

  237. Burmasheva N.V. Prosviryakov E.Yu. Analysis of Non-One-Dimensional Shear Concentration Convective Flows of a Viscous Incompressible Fluid in a Plane Horizontal Layer with Motionless Boundaries // AIP Conference Proceedings. 2020. Vol. 2315. – 020007. https://doi.org/10.1063/5.0036710.
    WoS 

  238. Burmasheva N.V. Prosviryakov E.Yu. Diffusion Poiseuille Flow of a Viscous Incompressible Binary Fluid in a Horizontal Layer with Motionless Boundaries // AIP Conference Proceedings. 2020. Vol. 2315. 020012. https://doi.org/10.1063/5.0036716.
    WoS 

  239. Burmasheva N.V. Prosviryakov E.Yu. Studying the Concentration Field Distribution in Shear Concentration Convective Flows of a Viscous Incompressible Fluid in a Plane Horizontal Layer with Immobile Boundaries // AIP Conference Proceedings. 2020. Vol. 2315. 020008. https://doi.org/10.1063/5.0036711.
    WoS 

  240. Burmasheva N.V. Prosviryakov E.Yu. The Properties of Isobars in Shear Concentration Convective Flows of a Viscous Incompressible Fluid in a Plane Horizontal Layer with Motionless Boundaries // AIP Conference Proceedings. 2020. Vol. 2315. 020009. https://doi.org/10.1063/5.0036712.
    WoS 

  241. Byval’tsev S. V. Zalazinskiy A.G. Agapitova O.Yu. Titov V.G. Multi-Criteria Selection of Operational Parameters of Hydromechanical Extrusion // AIP Conference Proceedings. 2020. Vol. 2315. 020013. https://doi.org/10.1063/5.0036699.
    WoS 

  242. Emelyanov I.G. Mironov V.I. Determination of the Tensile Strength of the 09G2S Steel Taking into Account the Effect of Hydrogen // AIP Conference Proceedings. 2020. Vol. 2315. 020016. https://doi.org/10.1063/5.0036911. I.
    WoS 

  243. Emelyanov I.G. Ogorelkov D. A. The Stress State of a Thick-Walled Steel Shell Taking into Account Contact with a Hydrogen-Containing Medium // AIP Conference Proceedings. 2020. Vol. 2315. 020017. https://doi.org/10.1063/5.0036912.
    WoS 

  244. Gorshkov A.V. Prosviryakov E.Yu. Analytical Study of the Ekman Angle for the Isothermal Flow of a Viscous Incompressible Fluid in View of the Navier Boundary Condition // AIP Conference Proceedings. 2020. Vol. 2315. 020018. https://doi.org/10.1063/5.0036889.
    WoS 

  245. Gorshkov A.V. Prosviryakov E.Yu. Inhomogeneous Isobaric Poiseuille-Ekman Flow of a Viscous Incompressible Fluid // AIP Conference Proceedings. 2020. Vol. 2315. 050009. https://doi.org/10.1063/5.0036899.
    WoS 

  246. Gorshkov A.V. Prosviryakov E.Yu. Inhomogeneous Isothermal Equatorial Poiseuille – Ekman Flow // AIP Conference Proceedings. 2020. Vol. 2315. 050008. https://doi.org/10.1063/5.0036894.
    WoS 

  247. Gorshkov A.V. Prosviryakov E.Yu. Large-Scale Convective Ekman Flow of Viscous Incompressible Fluid in the Equatorial Zone // AIP Conference Proceedings. 2020. Vol. 2315. 050007. https://doi.org/10.1063/5.0036897.
    WoS 

  248. Gorshkov A.V. Prosviryakov E.Yu. Nonstationary Laminar Bénard-Marangoni Convection for Newton-Richmann Heat Exchange // AIP Conference Proceedings. 2020. Vol. 2315. 050010. https://doi.org/10.1063/5.0036896.
    WoS 

  249. Kamantsev I.S. Kuznetsov A.V. Putilova E. A. Veselov I.N. Pyshmintsev I.Yu. Gorkunov E.S. Drukarenko N.A. Fracture Resistance Characteristics of the Promising 26KhMFA Pipe Steel // AIP Conference Proceedings. 2020. Vol. 2310. 020136. https://doi.org/10.1063/5.0034341.
    WoS 

  250. Kazakov A.L. Spevak L.F. Nefedova O.A. A Numerical Solution to the Two-Dimensional Nonlinear Degenerate Heat Conduction Equation with a Source // AIP Conference Proceedings. 2020. Vol. 2315. 040018. https://doi.org/10.1063/5.0036718.
    WoS 

  251. Klimova O.V. Computation Optimization for Digital Signal Processing Operations in Homogeneous Computing Environments and Structural Transformations of Their Parallel Algorithms // AIP Conference Proceedings. 2020. Vol. 2315. 040020. https://doi.org/10.1063/5.0036744.
    WoS 

  252. Konovalov D.A. Kozlov  A.V. Konovalov A.V. Features of the Forming of a Ring-Shaped Specimen Under Axial Compression with a Flat Die // AIP Conference Proceedings. 2020. Vol. 2315. – 020022. https://doi.org/10.1063/5.0036914.
    WoS 

  253. Konovalov D.A. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. Estimating the Repeatability of Experimental Data Obtained in Scratch Testing of a Polymer Epoxy Coating // AIP Conference Proceedings. 2020. Vol. 2315. 040021. https://doi.org/10.1063/5.0036919.
    WoS 

  254. Koroleva (Chekhomova) L.F. Final Mechanochemical Polishing of Precision Mechanical Engineering Products // AIP Conference Proceedings. 2020. Vol. 2315. 020023. https://doi.org/10.1063/5.0036918.
    WoS 

  255. Mironov V.I. Ogorelkov D. A. Lukashuk O.A. Designing a Metal Structure with Allowance for Damping Properties // AIP Conference Proceedings. 2020. Vol. 2315. 030010. https://doi.org/10.1063/5.0036853.
    WoS 

  256. Nefedova O.A. Spevak L.F. Parallel Technology for Solving Axisymmetric Problems of the Theory of Elasticity by the Boundary Element Method // AIP Conference Proceedings. 2020. Vol. 2315. 020030. https://doi.org/10.1063/5.0037021.
    WoS 

  257. Polyakov P.A. Polyakov A.P. Effect of the Quantitative and Qualitative Composition of Alloying Additions to Iron Powder on the Value of Ultimate Shear Resistance // AIP Conference Proceedings. 2020. Vol. 2315. 050020. https://doi.org/10.1063/5.0036681.
    WoS 

  258. Povolotskaya A.M. Putilova E. A. Gorkunov E.S. Zadvorkin S.M. Mushnikov A.N. Peculiarities of Magnetic Behavior in the Elastic Deformation of 08G2B Pipe Steel with Different Initial Stress-Strain States // AIP Conference Proceedings. 2020. Vol. 2310. 020261. https://doi.org/10.1063/5.0034340.
    WoS 

  259. Privalova V.V. Prosviryakov E.Yu. A Three-Dimensional Model of the Couette-Type Convective Flow with the Heating Condition at the Fluid Boundary // AIP Conference Proceedings. 2020. Vol. 2315. 020036. https://doi.org/10.1063/5.0036688.
    WoS 

  260. Privalova V.V. Prosviryakov E.Yu. An Exact Solution for the Rayleigh-Benard Convective Flow with Quadratic Heating at the Upper Boundary of a Fluid Layer // AIP Conference Proceedings. 2020. Vol. 2315. 020034. https://doi.org/10.1063/5.0036685.
    WoS 

  261. Privalova V.V. Prosviryakov E.Yu. An Exact Solution of the Convective Couette Flow Under the Parabolic Heating Condition at the Lower Boundary of a Fluid Layer // AIP Conference Proceedings. 2020. Vol. 2315. 050021. https://doi.org/10.1063/5.0036691.
    WoS 

  262. Privalova V.V. Prosviryakov E.Yu. Convective Couette-Poiseuille Type Flows with Quadratic Heating of One Fluid Layer Boundary // AIP Conference Proceedings. 2020. Vol. 2315. 020033. https://doi.org/10.1063/5.0036683.
    WoS 

  263. Privalova V.V. Prosviryakov E.Yu. Gradient Flow of a Non-Isothermal Fluid Under the Quadratic Heating Condition at the Upper Boundary // AIP Conference Proceedings. 2020. Vol. 2315. 020035. https://doi.org/10.1063/5.0036686.
    WoS 

  264. Privalova V.V. Prosviryakov E.Yu. The Influence of Gradient Pressure Effects on the Velocity Field in a Three-Dimensional Convective Flow // AIP Conference Proceedings. 2020. Vol. 2315. 020037. https://doi.org/10.1063/5.0036690.
    WoS 

  265. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Effect of the Laser Welding Conditions on the Chemical Composition of the AISI 321/Cu/Ti Material // AIP Conference Proceedings. 2020. Vol. 2315. 030015. https://doi.org/10.1063/5.0036864.
    WoS 

  266. Putilova E. A. Mushnikov A.N. Gorkunov E.S. Zadvorkin S.M. Musokhranov  V.V. Features of the Magnetic Characteristics Behavior of the 20K Boiler Steel During Elastic-Plastic Deformation // AIP Conference Proceedings. 2020. Vol. 2310. 020264. https://doi.org/10.1063/5.0034345.
    WoS 

  267. Smirnov S.V. Myasnikova M.V. Michurov N.S. Igumnov A.S. Numerical Simulation of the Stress-Strain State in a Polymer Coating Surface Layer Under Creep During Indentation // AIP Conference Proceedings. 2020. Vol. 2315. 020041. https://doi.org/10.1063/5.0036684.
    WoS 

  268. Solovei V.D. Mushnikov A.N. The Strain and Strain Rate Dependence of the Yield Stress of Copper // AIP Conference Proceedings. 2020. Vol. 2315. 040036. https://doi.org/10.1063/5.0036669.
    WoS 

  269. Spevak L.F. Babaylov N.A. A Finite Element Model of the Stress-Strain State of the Human Cornea // AIP Conference Proceedings. 2020. Vol. 2315. 040038. https://doi.org/10.1063/5.0036717.
    WoS 

  270. Struzhanov V.V. Chaikin A.E. Destruction of a Thin-Walled Spherical Vessel by Internal Pressure // AIP Conference Proceedings. 2020. Vol. 2315. 020044. https://doi.org/10.1063/5.0036729.
    WoS 

  271. Volkov S.S. The Influence of Random Grain Size Distribution in the Microstructure on Material Deformation Properties // AIP Conference Proceedings. 2020. Vol. 2315. 030019. https://doi.org/10.1063/5.0036751.
    WoS 

  272. Yurkevich A.V. Yurkevich  L.N. Diagnostic and In-Service Inspection of Torsion Strains in a Continuously Variable Mechanical Transmission with an Internal Force Function // AIP Conference Proceedings. 2020. Vol. 2315. 040048. https://doi.org/10.1063/5.0036660.
    WoS 

  273. Yurkevich A.V. Yurkevich  L.N. Using Monte Carlo Procedures to Estimate Torsion Bar Survival Probability in the Blagonravov Transmission // AIP Conference Proceedings. 2020. Vol. 2315. 040049. https://doi.org/10.1063/5.0036659.
    WoS 

  274. Kazakov A.L. Spevak L.F. Approximate and Exact Solutions to the Singular Nonlinear Heat Equation with a Common Type of Nonlinearity // Bulletin of Irkutsk State University, Series Mathematics. 2020. Vol. 34. No. 4. P. 18-34. https://doi.org/10.26516/1997-7670.2020.34.18.
    WoS  in Russian

  275. Burmasheva N.V. Prosviryakov E.Yu. A Class of Exact Solutions for Two-Dimensional Equations of Geophysical Hydrodynamics with Two Coriolis Parameters // BULLETIN OF IRKUTSK STATE UNIVERSITY-SERIES MATHEMATICS. 2020. Vol. 32. P. 32-48. DOI: https://doi.org/10.26516/1997-7670.2020.32.33.
    WoS  in Russian

  276. Sarkeeva A.A. Kruglov A.A. Lutfullin R.Ya. Gladkovsky S.V. Zhilyaev A.P. Mulyukov R.R. Characteristics of the mechanical behavior of Ti–6Al–4V multilayer laminate under impact loading // Composites Part B: Engineering. 2020. https://doi.org/10.1016/j.compositesb.2020.108390.
    WoS 

  277. Byval’tsev S. V. Augmented reality for SCADA // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 052022. DOI: 10.1088/1757-899X/862/5/052022.
    WoS 

  278. Byval’tsev S. V. Information search subsystem for intellectual system of improvement of pressure processing processes // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 052015. DOI: 10.1088/1757-899X/862/2/022015.
    WoS 

  279. Kamantsev I.S. Drukarenko N.A. Kuznetsov A.V. Stepanov S.I. Chesnokov M.A. Chesnokov Application of optical methods in tests of new materials with gradient structure // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 848. 012029. DOI:10.1088/1757-899X/848/1/012029.
    WoS 

  280. Mironov V.I. Emelyanov I.G. Lukashuk O.A. Diagram of plastic material transition into brittle state under hydrogen saturation // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 022020. DOI: 10.1088/1757-899X/862/2/022020.
    WoS 

  281. Mironov V.I. Ogorelkov D. A. Laptev A.A. Lukashuk O.A. Impact of damping on decay time of free oscillations in metal structures // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 022027. DOI: 10.1088/1757-899X/862/2/022027.
    WoS 

  282. Baraz V.R. Gerasimov S.S. Gruzdeva I.A.. Chemesova  A.V. Shveikin V.P. Ovchinnikova A.O. Veretennikova (Golubkova) I.A. The additive technology to obtain a three-dimensional model of the 81Cu-19Ni alloy // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012119. DOI: 10.1088/1757-899X/966/1/012119.
    WoS 

  283. Suzdaltsev A.V. Nikolaev A.Y. Smirnov A.S. Salt flux compositions for reprocessing and producing Al-Mg-based alloys and composites // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 918. 012110. DOI: 10.1088/1757-899X/918/1/012110.
    WoS 

  284. Nenashev Pavel Abdulov Sergey Taratorkin A.I. Estimation of adequacy of the simulation model of a water-jet propulsion drive of high-speed tracked amphibious vehicles // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052077. doi:10.1088/1757-899X/971/5/052077.
    WoS 

  285. Nenashev Pavel Abdulov Sergey Taratorkin A.I. Increase of durability of an amphibious vehicle water jet propulsion driver // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033036. doi:10.1088/1757-899X/709/3/033036.
    WoS 

  286. Abdulov  S.V. Derzhanskiy V.B. Yakovlev A.G. Implementation of the prototype control algorithm for an unmanned tracked vehicle // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042070. doi:10.1088/1757-899X/971/4/042070.
    WoS 

  287. Khomichev Alexey Volkov A.A. Chassis design of skid steer loaders // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033012. doi:10.1088/1757-899X/709/3/033012.
    WoS 

  288. Khomichev Alexey Volkov A.A. Improving the layout of skid steer loader // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042017. doi:10.1088/1757-899X/971/4/042017.
    WoS 

  289. Byval’tsev S. V. Multi-criteria optimization of metal pressure processes using experiment planning methods // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012122. doi:10.1088/1757-899X/966/1/012122.
    WoS 

  290. Byval’tsev S. V. Review of the features of augmented reality application in the training of operators and maintenance staff // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012121. doi:10.1088/1757-899X/966/1/012121.
    WoS 

  291. Derzhanskiy V.B. Cherepanov S.V. Volkov A.A. Method of studying the dynamics of the controlled mechanical continuously variable transmission with an elastic element and one-way clutch // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052099. doi:10.1088/1757-899X/971/5/052099.
    WoS 

  292. Derzhanskiy V.B. Taratorkin A.I. Yakovlev A.G. Substantiation of the trajectory planning algorithm for unmanned tracked vehicle // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022088. doi:10.1088/1757-899X/709/2/022088.
    WoS 

  293. Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Hodak A.S. Stressed State of the Titanile Shell, Operating in a Medium with Hydrogen // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033021. doi:10.1088/1757-899X/709/3/033021.
    WoS 

  294. Kamantsev I.S. Kuznetsov A.V. Failure features of laminated materials under static and cyclic loading // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033107. doi: 10.1088/1757-899X/709/3/033107.
    WoS 

  295. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. A knowledge base model of the computer-aided design system for solids of revolution press-forging // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 032061. doi: 10.1088/1757-899X/971/3/032061.
    WoS 

  296. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Determination of upset ingot dimensions during computer-aided forging design under fuzzy goals // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022079. doi:10.1088/1757-899X/709/2/022079.
    WoS 

  297. Kuznetsov A.V. Kamantsev I.S. Experimental and numerical determination of the barrier layer effect in the composite on the crack propagation // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033108. doi:10.1088/1757-899X/709/3/033108.
    WoS 

  298. Makarov A.V. Kuznetsov V.P. Sirosh V.A. Volkova   E.G. Skorynina P.A. Merkushev A.G. Structural and micromechanical properties of 316L stainless steel produced by selective laser melting // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 1008. 012005. doi: 10.1088/1757-899X/1008/1/012005.
    WoS 

  299. Mushnikov A.N. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Kryucheva K.D. The effect of elastic deformation on the minor hysteresis loops of low carbon steel // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012055. https://iopscience.iop.org/article/10.1088/1757-899X/966/1/012055.
    WoS 

  300. Salikhyanov D.R. Gladkovsky S.V. Avraamov Yu.A. Volkov V.P. Veselova V.E. Rheological Properties and Microstructure of AlSi10Mg Aluminum Alloy produced by Selective Laser Melting // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033113. doi:10.1088/1757-899X/709/3/033113.
    WoS 

  301. Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Structural and phase transformations in austenitic chromium-nickel steels during nanostructuring frictional treatment // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 1008. 012055. doi: 10.1088/1757-899X/1008/1/012055.
    WoS 

  302. Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. Simulating the rheological behavior of AlMg6/10% SiC metal matrix composite under high-temperature deformation // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033114. doi:10.1088/1757-899X/709/3/033114.
    WoS 

  303. Smirnov S.V. Veretennikova (Golubkova) I.A. Konovalov D.A. Effect of nanosized oxide fillers on the adhesive strength of epoxy lacquer under scratching // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044007. doi:10.1088/1757-899X/709/4/044007.
    WoS 

  304. Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Aleksandrov S.E. Formation of a narrow hard layer in the AlMg6 alloy near the contact surface after extrusion through a conical die // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033115. doi:10.1088/1757-899X/709/3/033115.
    WoS 

  305. Soboleva N.N. Makarov A.V. Nikolaeva E.P. Skorynina P.A. Malyigina I.Yu. Effect of frictional treatment with a dense cubic boron nitride indenter on the micromechanical properties of the NiCrBSi–Cr3C2 // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012050. https://iopscience.iop.org/article/10.1088/1757-899X/966/1/012050.
    WoS 

  306. Soldatkin V.A. Yurkevich A.V. Tereshin A.V. Blagonravov Continuously Variable Transmission: Computational Model of Load Distribution over Elements of Control System // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042020. doi:10.1088/1757-899X/971/4/042020.
    WoS 

  307. Taratorkin A.I. Belevich A.V. Taratorkin I.A. Trusevich I.A. Strategy for optimizing the NVH parameters of the transport vehicle powertrain during its design // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052085. doi:10.1088/1757-899X/971/5/052085.
    WoS 

  308. Taratorkin A.I. Taratorkin I.A. Trusevich  I.A. Theoretical and experimental optimization of vibroacoustic parameters of MKSM-800 loader // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022112. doi:10.1088/1757-899X/709/2/022112.
    WoS 

  309. Tereshin A.V. Yurkevich A.V. Soldatkin V.A. The Blagonravov continuously variable transmission: computational model of oscillation generator loading // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042019. doi:10.1088/1757-899X/971/4/042019.
    WoS 

  310. Vyaznikov M.V. Vyaznikov A.M. Increasing the mobility of tracked vehicles during curvilineer motion with partial skidding // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052080. doi:10.1088/1757-899X/971/5/052080.
    WoS 

  311. Vyaznikov M.V. Vyaznikov A.M. Investigation of loading of the traveling system of track-type tractor // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022109. doi:10.1088/1757-899X/709/2/ 022109.
    WoS 

  312. Vyaznikov M.V. Vyaznikov A.M. Two power split path hydrodynamic drive train of the commercial tractor // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022110. doi:10.1088/1757-899X/709/2/ 022110.
    WoS 

  313. Yurkevich A.V. Tereshin A.V. Soldatkin V.A. The Blagonravov Continuously Variable Transmission: Importance of Internal Force Functions for Torque Transforming // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042018. doi:10.1088/1757-899X/971/4/042018.
    WoS 

  314. Zalazinskiy A.G. Kruchkov D.I. Shveikin V.P. Simulation of stress-strain state at the boundaries of a bimetallic composite to determine tear-off resistance // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033016. doi:10.1088/1757-899X/709/3/ 033016.
    WoS 

  315. Zalazinskiy A.G. Shveikin V.P. Titov V.G. The expert system for improving the technological processes of composite manufacturing // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044115. doi:10.1088/1757-899X/709/4/ 044115.
    WoS 

  316. Burmasheva N.V. Prosviryakov E.Yu. On Marangoni shear convective flows of inhomogeneous viscous incompressible fluids in view of the Soret effect // Journal of King Saud University – Science. 2020. Vol. 32. Iss. 8. P. 3364–3371. https://doi.org/10.1016/j.jksus.2020.09.02.
    WoS 

  317. Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.
    WoS 

  318. Gushchina N.V. Makhin'ko F.F. Ovchinnikov V.V. Kaigorodova L.I. Rasposienko D.Yu. Vichuzhanin D.I. Ion irradiation effect (Ar+, E = 20-40 keV) on the mechanical properties and microstructure of aluminum V95 alloy // Journal of Physics: Conference Series. 2020. Vol. 1713. 012018. doi:10.1088/1742-6596/1713/1/012018.
    WoS 

  319. Lookin N.A. Digital image processing systems based on functional-oriented processors with a homogeneous structure // Journal of Physics: Conference Series. 2020. Vol. 1680. 012034. doi:10.1088/1742-6596/1680/1/012034.
    WoS 

  320. Kazakov A.L. Spevak L.F. M.-G. Lee On the Construction of Solutions to a Problem with a Free Boundary for the Nonlinear Heat Equation // Journal of Siberian Federal University - Mathematics & Physics. 2020. Vol. 13. No. 6. P. 694–707. DOI: 10.17516/1997-1397-2020-13-6-694-707.
    WoS  in Russian

  321. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2020. Vol. 8. Iss. 3. P. 431-441. DOI: 10.1007/s42417-019-00183-4.
    WoS 

  322. Savrai R.A. Kogan L.K. Makarov A.V. Soboleva N.N. Features of eddy-current testing of the fatigue degradation of laser clad cobalt-nickel-chromium coating under contact loading // Letters on Materials. 2020. V. 10. Is. 3. P. 315-321. DOI: 10.22226/2410-3535-2020-3-315-321.
    WoS  in Russian

  323. Soboleva N.N. Makarov A.V. Zavarzina  E.P. Skorynina P.A. Malyigina I.Yu. Features of frictional treatment of the composite NiCrBSi-Cr3C2 laser clad coating // Letters on Materials. 2020. Vol. 10. No. (4). P. 506-511. https://doi.org/10.22226/2410-3535-2020-4-506-511.
    WoS  in Russian

  324. Alwan H.L. Korobov Yu.S. Soboleva N.N. Prokopyev D.A. Cavitation erosion – corrosion behavior of Fe-Cr steel induced by ultrasonic vibration // Materials Science Forum. 2020. Vol. 98. P. 312-317. https://doi.org/10.4028/www.scientific.net/MSF.989.312.
    WoS 

  325. Polyansky L.I. Babaylov N.A. Loginov Y.N. The Optimal Content of Liquid Glass in the Raw Material Mixtures in the Briquettes Production // Materials Science Forum. 2020. Vol. 989. P. 678-683. https://doi.org/10.4028/www.scientific.net/MSF.989.678.
    WoS 

  326. Gladkovsky S.V. Salikhyanov D.R. Volkov V.P. Avraamov Y.A. Veselova V.E. Rheological Properties and Microstructure of PH1 Stainless Steel Produced by Selective Laser Melting // Materials Science Forum. 2020. Vol. 989. P. 811-815. https://doi.org/10.4028/www.scientific.net/MSF.989.811.
    WoS 

  327. Salikhyanov D.R. Role of Surface Roughness in the Interlayer Boundary Formation during Manufacturing of Clad Metal Composites // Materials Science Forum. 2020. Vol. 989. P. 654-659. https://doi.org/10.4028/www.scientific.net/MSF.989.654.
    WoS 

  328. Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Heat treatment effect on ledeburite alloys wear resistance // Materials Today: Proceedings. 2020. https://doi.org/10.1016/j.matpr.2020.08.417.
    WoS 

  329. Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2020. https://doi.org/10.1016/j.matpr.2020.10.039.
    WoS 

  330. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. 2020. V. 61. Nos. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1.
    WoS  in Russian

  331. Pugacheva (Vandysheva) N.B. Babaylov N.A. Bykova (Gurchenko) T.M. Loginov Yu.N. The Structure, Phase Composition and Micromechanical Properties of Briquetted Aluminum // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2020. Vol. 22. No. 3. P. 82-94. DOI: 10.17212/1994-6309-2020-22.3-82-94.
    WoS  in Russian

  332. Soboleva N.N. Makarov A.V. Stepchenkov A.K. Malyigina I.Yu. Korobov Yu.S. Influence of thermal effects on the micromechanical properties of the nickel-chromium coating obtained by gas powder laser cladding // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 104–117. DOI: 10.17212/1994-6309-2020-22.2-104-117. (In Russian).
    WoS  in Russian

  333. Savrai R.A. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The structural characteristics and contact loading behavior of gas powder laser clad CoNiCrW coating // Optics and Laser Technology. 2020. V. 126. Art. 106079. P. 1-8. DOI: 10.1016/j.optlastec.2020.106079.
    WoS 

  334. Bogdanova E.A. Veretennikova (Golubkova) I.A. Investigation of sintering features of ceramic materials based on hydroxyapatite and its substituted forms // Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials. 2020. Iss. 12. P. 535-545. DOI: 10.26456/pcascnn/2020.12.535.
    WoS  in Russian

  335. Berezovskaya V.V. Savrai R.A. Maslova O.V. Ovchinnikov V.V. Gushchina N.V. Influence of irradiation with Ar+ ions on the process of the delayed fracture of a maraging steel // Physics of Metals and Metallography. 2020. Vol. 121. No. 3. P. 291-297. DOI: 10.1134/S0031918X20030035.
    WoS  in Russian

  336. Pugacheva (Vandysheva) N.B. Orishich A.M. Cherepanov A.N. Senaeva (Pugacheva) E.I. Trushina E.B. Trushina. Study of the Chemical Composition and Microstructure of AISI 321/Cu/Ta/Ti Welded Joint // Physics of Metals and Metallography. 2020. Vol. 121. No. 11. P. 1112-1118. DOI: 10.1134/S0031918X20110083.
    WoS  in Russian

  337. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Zamaraev L.M. The Effect of Atmosphere Composition on the Mechanism of Destruction of a Boride Coating on the Surface of a Die Steel during Thermal Cycling // Physics of Metals and Metallography. 2020. Vol. 121. No. 6. P. 590-596. DOI: 10.1134/S0031918X20060113.
    WoS  in Russian

  338. Savrai R.A. Skorynina P.A. Makarov A.V. Osinceva A.L. Structure and surface properties of metastable austenitic steel subjected to liquid carburizing at a reduced temperature // Physics of Metals and Metallography. 2020. Vol. 121. No. 1. P. 65-71. DOI: 10.1134/S0031918X20010135.
    WoS  in Russian

  339. Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov  A.V. Smirnova (Yekzemplyarova) E.O. Effect of modifying dopes on the mechanical properties of epoxy coatings affected by thermocycling // Procedia Structural Integrity. 2020. Vol. 25. P. 209-213. DOI: 10.1016/j.prostr.2020.04.025.
    WoS 

  340. Smirnov S.V. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Pestov  A.V. Smirnova (Yekzemplyarova) E.O. The effect of Stress State on the Adhesive Strength of a Glued Sandwich in Shear-Compression Testing // Procedia Structural Integrity. 2020. Vol. 28. P. 234-238. DOI: 10.1016/j.prostr.2020.10.029.
    WoS 

  341. Ershkov S.V. Christianto V. Rachinskaya A. Prosviryakov E.Yu. A Nonlinear Heuristic Model for Estimation of Covid-19 Impact to World Population // Romanian Reports in Physics. 2020. Vol. 72. Article no. 605. WOS: 000562620700016.
    WoS 

  342. Pestov  A.V. Osipova V.A. Koryakova O.V. Gorbunova T.I. Smirnov S.V. Veretennikova (Golubkova) I.A. Preparation of a New Material Based on Epoxy Oligomers for Forming Corrosion-Protective Coatings // Russian Journal of Applied Chemistry. 2020. Vol. 93. P. 400-405. DOI: 10.1134/S107042722003012X.
    WoS  in Russian

  343. Konovalov D.A. Veretennikova (Golubkova) I.A. Bykova (Gurchenko) T.M. Michurov N.S. Development of an Approach to Determining the Representative Volume Element of the Al/SiC Metal Matrix Composite Material Fabricated by Squeeze Casting // Russian Metallurgy. 2020. Vol. 2020. No. 7. P. 738–745. DOI: 10.1134/S0036029520070101.
    WoS  in Russian

  344. Gladkovsky S.V. Volkov V.P. Salikhyanov D.R. Veselova V.E. Patselov A.M. Rheological Behavior of a VT23 Alloy during Deformation in a Wide Temperature Range // RUSSIAN METALLURGY (METALLY). 2020. Vol. 2020. No. 10. P. 1147-1150. DOI: 10.1134/S0036029520100079.
    WoS  in Russian

  345. Alwan H.L. Korobov  Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Study of Cavitation Erosion-Corrosion Resistance of Thermally Sprayed Ni-Based Coatings Prepared by HVAF Process // Solid State Phenomena. 2020. Vol. 299. P. 893–901. https://doi.org/10.4028/www.scientific.net/SSP.299.893.
    WoS 

  346. Alwan H.L. Korobov Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Nikolaeva E.P. Deviatiarov  M.S. Cavitation Erosion-Corrosion Resistance of Deposited Austenitic Stainless Steel/E308L-17 Electrode // Solid State Phenomena. 2020. Vol. 299. P. 908–913. https://doi.org/10.4028/www.scientific.net/SSP.299.908.
    WoS 

  347. Krylova S.E. Gladkovsky S.V. Romashkov E.V. Conceptual approach to development, structure formation and hardening micro-alloyed by steels for the metallurgical tool // Solid State Phenomena. 2020. Vol. 299. P. 658–663. https://doi.org/10.4028/www.scientific.net/SSP.299.658.
    WoS 

  348. Mironov V.I. Ogorelkov D. A. Lukashuk O.A. Analysis of Fatigue Damage Accumulation in Structural Materials under Quasi-Random Load // Solid State Phenomena. 2020. Vol. 299. P. 1178–1183. https://doi.org/10.4028/www.scientific.net/ssp.299.1178.
    WoS 

  349. Kazakov A.L. Spevak L.F. Nefedova O.A. Lempert Anna On the Analytical and Numerical Study of a Two-Dimensional Nonlinear Heat Equation with a Source Term // Symmetry-Basel. 2020. Vol. 12. Iss. 6. article 921. https://doi.org/10.3390/sym12060921.
    WoS 

  350. Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Alexandrov S. A New Experimental Method for Determining the Thickness of Thin Surface Layers of Intensive Plastic Deformation Using Electron Backscatter Diffraction Data // Symmetry-Basel. 2020. ol. 12. Iss. 4. article 677. DOI: 10.3390/sym12040677.
    WoS 

  351. Burmasheva N.V. Prosviryakov E.Yu. Exact solution of Navier–Stokes equations describing spatially inhomogeneous flows of a rotating fluid // Trudy Instituta Matematiki i Mekhaniki URO RAN. 2020. Vol. 26. No. 2. P. 79–87. DOI: 10.21538/0134-4889-2020-26-2-79-87.
    WoS  in Russian

  352. Prosviryakov E.Yu. Exact solutions to generalized plane Beltrami–Trkal and Ballabh flows // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol. 24. No. 2. P. 319-330. DOI: https://doi.org/10.14498/vsgtu1766.
    WoS  in Russian

  353. Struzhanov V.V. Integro-differential equations of the second boundary value problem of linear elasticity theory. Communication 2. Inhomogeneous anisotropic body // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 1. P. 199-208. DOI: 10.14498/vsgtu1730.
    WoS  in Russian

  354. Struzhanov V.V. Korkin A.V. On the solution of one problem of deformation of rod systems that does not satisfy the Hadamard conditions by the simple iteration method // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 595-603. https://doi.org/10.14498/vsgtu1787.
    WoS  in Russian

  355. Klimova O.V. Decomposition Approach to the Construction of Parallel Algorithms for Processing of Two-Dimensional Data // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2020. No. 52. P. 114-122. DOI: 10.17223/19988605/52/14.
    WoS  in Russian

  356. Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part II. Stage of Concentrated Strain // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 464-468. https://doi.org/10.1007/s11041-020-00585-2.
    WoS  in Russian

  357. Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part I. Yield Plateau and the Stage of Strain Hardening // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 457-463. https://doi.org/10.1007/s11041-020-00584-3.
    WoS  in Russian

  358. Makarov A.V. Savrai R.A. Skorynina P.A. Volkova E.G. Development of methods for steel surface deformation nanostructuring // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 1-2. P. 61-69. DOI: 10.1007/s11041-020-00513-4.
    WoS  in Russian

  359. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. – 2020. – V. 61. – Nos. 11-12. – P. 764-768. – DOI: 10.1007/s11041-020-00497-1 // Metal Science and Heat Treatment. 2020. V. 61. No. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1.
    WoS 

  360. Gorkunov E.S. Zadvorkin S.M. Khudorozhkova Yu.V. Korzunin G.S. Effect of the Crystallographic Texture Type on the Anisotropy of the Magnetic Leakage Field Parameters of Steel Sheets // Physical Mesomechanics. 2020. Vol. 23. Iss. 3. P. 246-255. https://doi.org/10.1134/S1029959920030091.
    WoS 

  361. Kharanzhevskiy E.V. Ipatov A.G. Krivilyov M.D. Makarov A.V. Gil'mutdinov F.Z. Volkova E.G. Ultralow friction behaviour of B4C-BN-MeO composite ceramic coatings deposited on steel // Surface and Coatings Technology. 2020. V. 390. Art. 125664. DOI: 10.1016/j.surfcoat.2020.125664.
    WoS 

  362. Zhidkov I.S. Kukharenko A.I. Makarov A.V. Savrai R.A. Gavrilov N.V. Cholakh S.O. Kurmaev E.Z. XPS characterization of surface layers of stainless steel nitrided in electron beam plasma at low temperature // Surface and Coatings Technology. 2020. V. 386. Art. 125492. DOI: 10.1016/j.surfcoat.2020.125492.
    WoS 

  363. Zimogliadova T.A. Bushueva E.G. Shtertser A.A. Grinberg B.E. Soboleva N.N. Kollmannsberger E. Chakin I.K. Bibko D.S. Leonov A.V. Safarova D.E. Structure features and wear resistance of layers, formed by Ni-based self-fluxing alloy combined with boron by electron beam, revealed in the air atmosphere // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 89–103. DOI: 10.17212/1994-6309-2020-22.2-89-103. (In Russian).
    WoS  in Russian

  364. Kruchkov D.I. Nesterenko A.V. A review of experimental studies of creep behavior and superplasticity in a discontinuous SiC aluminum-matrix composites // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 1. P. 130–157. DOI: 10.17212/1994-6309-2020-22.2-130-157. (In Russian).
    WoS  in Russian

  365. Burmasheva N.V. Prosviryakov E.Yu. Convective layered flows of a vertically whirling viscous incompressible fluid. Temperature field investigation // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 528-541. DOI: 10.14498/vsgtu1770.
    WoS  in Russian

  366. Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // Advances in Intelligent Systems and Computing. 2020. Vol. 1115. P. 340-348. https://doi.org/10.1007/978-3-030-37916-2_33.
    Scopus 

  367. Babaylov N.A. Loginov Y.N. Polyanskiy L.I. Determination of the Angle of Bite during Roll Briquetting of Finely Dispersed Materials // Chernye metally. 2020. Iss. 2. P. 52-56. 2-s2.0-85081616613.
    Scopus  in Russian

  368. Deryabin S.L. Kiryanova A.S. Construction of two-dimensional flows in physical space arising after the decay of a special discontinuity // Computational Technologies. 2020. Vol. 25. No. 4. P. 4-19. DOI: 10.25743/ICT.2020.25.4.002.
    Scopus  in Russian

  369. Kharanzhevskiy E. Ipatov A. Krivilyov M. Makarov A.V. Model experiment on reactive phase formation and solidi cation of B4C-BN composites via nanosecond pulse laser processing // European Physical Journal: Special Topics. 2020. Vol. 229. P. 217-224. https://doi.org/10.1140/epjst/e2019-900076-1.
    Scopus 

  370. Volkov V.P. Salikhyanov D.R. Kamantsev I.S. Development and Investigation of the Forging Method of Long-Length Blanks with Mutual Displacement of Anvils // Journal of Chemical Technology and Metallurgy. 2020. Vol. 55. Iss. 3. 571 p. 2-s2.0-85086125773.
    Scopus 

  371. Anakhov S.V. Guzanov B.N. Matushkin A.V. Pugacheva (Vandysheva) N.B. Pykin Yu.A. Influence of Plasma Torch Design on Cutting Quality during Precision Air-Plasma Cutting of Metal // Steel in Translation. 2020. Vol. 50. No. 3. P. 159–165. DOI: 10.3103/S096709122003002X.
    Scopus  in Russian

  372. Lepikhin S.V. Gladkovsky S.V. Granovskii O.G. The Influence of Low-Temperature Restorative Heat Treatment on the Structure and Mechanical Properties of Boiler Drum Metal after Long-Term Operation // Thermal Engineering. 2020. Vol. 67. No. 2. P. 138–144. DOI: 10.1134/S0040601520020020.
    Scopus  in Russian

  373. Gorkunov E.S. Mushnikov A.N. Magnetic Methods of Evaluating Elastic Stresses in Ferromagnetic Steels (Review) // Kontrol’. Diagnostika. 2020. Vol. 23. No. 12. P. 4-23. doi: 10.14489/td.2020.12.pp.004-023.
    РИНЦ  in Russian

  374. Burmasheva N.V. Prosviryakov E.Yu. Exact solution for stable convective concentration flows of a couette type // Vychislitel'naya mehanika sploshnyh sred. 2020. Vol. 13. No. 3. P. 337-349. DOI: 10.7242/1999-6691/2020.13.3.27.
    РИНЦ  in Russian

  375. Lookin N.A. Reconfigurable Systolic 2D-Arrays of Bit-Level Processor Elements for High Speed Data Processing in Embedded Computer Systems. In: Kumkov S., Shabunin S., Syngellakis S. (eds) Advances in Information Technologies, Telecommunication, and Radioelectronics. Innovation and Discovery in Russian Science and Engineering. Publisher Name: Springer, Cham. – Springer Nature Switzerland AG., 2020. Р. 29-40. Print ISBN: 978-3-030-37513-3. – Online ISBN: 978-3-030-37514-0. – DOI: https://doi.org/10.1007/978-3-030-37514-0_3.

  376. Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // In Book “VIII International Scientific Siberian Transport Forum. TransSiberia 2019. Advances in Intelligent Systems and Computing”. Chapter No. 33. Chapter title “Calculation of Tank Car under Quasirandom Cyclic Loading”. 2020. Vol.1115. https://doi.org/10.1007/978-3-030-37916-2_33. – 2020. – Springer Nature Switzerland AG. (Springer, Cham). – Popovic Z., Manakov A., Breskich V. (Eds). – Print ISBN: 978-3-030-37915-5. – Online ISBN: 978-3-030-37916-2.

  377. Burmasheva N.V. Prosviryakov E.Yu. An Exact Solution for Describing the Unidirectional Marangoni Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition. Temperature Field Investigation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 1. P. 6-23. DOI: 10.17804/2410-9908.2020.1.006-023.

  378. Burmasheva N.V. Prosviryakov E.Yu. Isothermal Layered Flows of a Viscous Incompressible Fluid with Spatial Acceleration in the Case of Three Coriolis Parameters [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 29-46. DOI: 10.17804/2410-9908.2020.3.029-046.

  379. Burmasheva N.V. Prosviryakov E.Yu. Studying the Stratification of Hydrodynamic Fields for Laminar Flows of Vertically Swirling Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 62-78. DOI: 10.17804/2410-9908.2020.4.062-078.

  380. Gladkovsky S.V. Nedzvetsky P.D. Vichuzhanin D.I. Petrova (Kuteneva) S.V. Lepikhin S.V. Brittle Fracture Resistance and Damping Properties of a Steel-Rubber Metal-Polymer Composite [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 6-18. DOI: 10.17804/2410-9908.2020.2.006-018.

  381. Kamantsev I.S. Loginov Yu.N. Belikov  S.V. Stepanov S.I. Karabanalov M.S. Golodnov A.I. Fracture Behavior of Cellular Structures Obtained by Selective Laser Melting [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 35-47. DOI: 10.17804/2410-9908.2020.4.035-047.

  382. Kazakov A.L. Spevak L.F. Spevak E.L. On Numerical Methods for Constructing Benchmark Solutions to a Nonlinear Heat Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 26-44. DOI: 10.17804/2410-9908.2020.5.026-044.

  383. Koroleva (Chekhomova) L.F. Larionov  L.P. Dobrinskaya M.N. Implants and Bone Technology with the Use of Doped Calcium Carbonate-Phosphates [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 6. P. 54-61. DOI: 10.17804/2410-9908.2020.6.054-061.

  384. Lookin N.A. Rubin L.S. A Precision Low-Frequency Analog-to-Digital Converter for Advanced Systems of Technical Diagnostics and Nondestructive Testing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 6-16. DOI: 10.17804/2410-9908.2020.5.006-016.

  385. Smirnov A.S. Konovalov A.V. Kanakin V.S. Neural Network Modeling of the Rheology of the Almg6 Alloy under the Dispersoid Barrier Effect and the Inhibition of Dynamic Relaxation Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 6. P. 10-26. DOI: 10.17804/2410-9908.2020.6.010-026.

  386. Struzhanov V.V. Chaikin A.E. Determining the Moment of Destruction of Protective Coatings on Pipes and Spherical Vessels [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 6-18. DOI: 10.17804/2410-9908.2020.3.006-018.

  387. Vandyshev A.B. A Systematic Analysis of the Parameters of Disk-Type Membrane-Catalytic Devices for Producing High-Purity Hydrogen from Methane and Diesel Fuel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 6-27. DOI: 10.17804/2410-9908.2020.4.06-27.

  388. Mironov V.I. Emelyanov I.G. Vichuzhanin D.I. Zamaraev L.M. Ogorelkov D. A. Yakovlev V.V. Effect of Hydrogenation Temperature and Tensile Stress on the Parameters of the Complete Deformation Diagram for Steel 09G2S [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures.. 2020. Iss. 1. P. 24-33. DOI: 10.17804/2410-9908.2020.1.024-033.

  389. Anakhov  S.V. Guzanov  B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Matyshkin A.V. The Influence of the Constructive Features of the Plasmotron on the Quality of the Cut During Air-Plasma Cutting of Sheet Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 58-69. DOI: 10.17804/2410-9908.2020.5.058-069.

  390. Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for Describing a Unidirectional Marangoni Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition. Pressure Field Investigation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 61-75. DOI: 10.17804/2410-9908.2020.2.061-075.

  391. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. A Study of Boriding Methods, An Analysis of the Structure and Properties of the Obtained Coatings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. Iss. 2, 2020. P. 38-60. DOI: 10.17804/2410-9908.2020.2.038-060.

  392. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. The Effect of Initial Stress-Strain States on the Magnetic Behaviour of 08G2B Hot-Rolled Steel under Elastic Uniaxial Tension // International Journal "NDT Days. 2020. Vol. III. Iss. 1. P. 26-35.

  393. Gorkunov E.S. Mitko Mihovski Mushnikov A.N. Estimation of Mechanical Stresses in Steels Using Electromagnetic Methods // International Journal "NDT Days" // International Journal "NDT Days". 2020. Vol. III. Iss. 1. P. 6-25.

  394. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Dynamic loading of friction disks in automotive transmissions // MATEC Web of Conferences. 2020. Vol. 317. 02002. https://doi.org/10.1051/matecconf/202031702002.

  395. Burmasheva N.V. Prosviryakov E.Yu. Unidirectional Marangoni–Poiseuille Flows of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2019. Vol. 2176. 030021. – https://doi.org/10.1063/1.5135145.
    WoS 

  396. Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9 No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
    WoS  Scopus 

  397. Khotinov V.A. Polukhina O.N. Vichuzhanin D.I. Schapov G.V. Farber V.M. Study of Luders Deformation in Ultrafine Low-Carbon Steel by the Digital Image Correlation Technique / Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-328-333.
    WoS  Scopus  in Russian

  398. Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Zadvorkin S.M. Putilova E. A. Kamantsev I.S. Effect of Steplike Plastic Deformation on the Mechanical Properties and the Fracture of the Bimetal Produced by Exposition Welding / Russian Metallurgy (Metally). 2019. Vol. 2019. No. 5. P. 556–564. DOI: 10.1134/S0036029519050124.
    WoS  Scopus  in Russian

  399. Kazakov A.L. Nefedova O.A. Spevak L.F. Solution of the Problem of Initiating the Heat Wave for a Nonlinear Heat Conduction Equation Using the Boundary Element Method // Computational Mathematics and Mathematical Physics. 2019. Vol. 59. No. 6. P. 1015-1029. DOI: 10.1134/S0965542519060083.
    WoS  Scopus  in Russian

  400. Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solutions of Aluminum and Iron Oxides // Inorganic Materials. 2019. Vol. 55. No. 6. P. 556-562. DOI: 10.1134/S0020168519060074..
    WoS  Scopus  in Russian

  401. Lezhnin N.V. Makarov A.V. Luchko S.N. The effect of ultrasonic impact-frictional treatment on the surface roughness and hardening of 09Mn2Si constructional steel // Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-310-315.
    WoS  Scopus  in Russian

  402. Makarov A.V. Korobov Yu.S. Soboleva N.N. Khudorozhkova Yu.V. Vopneruk A.A. Balu P. Barbosa M.M. Malyigina I.Yu. Burov S.V. Stepchenkov A.K. Wear-resistant nickel-based laser clad coatings for high-temperature applications // Letters on Materials. 2019. Vol. 9. No. 4. P. 470-474. https://doi.org/10.22226/2410-3535-2019-4-470-474.
    WoS  Scopus  in Russian

  403. Petrova (Kuteneva) S.V. Gladkovsky S.V. Dvoynikov D.A. Sergeev S.N. Microstructure and brittle fracture resistance of layered steel composites produced by explosion welding and pack rolling followed by heat treatment // Letters on Materials. 2019. Vol. 9. No. 4. P. 442-446. https://doi.org/10.22226/2410-3535-2019-4-442-446.
    WoS  Scopus 

  404. Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9. No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
    WoS  Scopus  in Russian

  405. Smirnov S.V. Veretennikova (Golubkova) I.A. Fomin V.M. Filippov A.A. Brusentseva T.A. Studying the Viscoelastic Properties of an Epoxy Resin Strengthened with Silicon Dioxide Nanoparticles by Instrumented Microindentation // Mechanics of Composite Materials. 2019. Vol. 55. No. 3. P. 337-348. DOI: 10.1007/s11029-019-09816-x.
    WoS  Scopus  in Russian

  406. Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Trishin V.N. Akashev L.A. Druzhinin A.V. Assessing Fatigue Damage in Organic Glass Using Optical Methods // Optics and Spectroscopy. 2019. Vol. 127. Iss. 5. P. 943-953. DOI: https://doi.org/10.1134/S0030400X19110286.
    WoS  Scopus  in Russian

  407. Kaigorodova L.I. Rasposienko D.Y. Pushin V.G. Pilyugin V.P. Smirnov S.V. Effect of Annealing on the Structure and Properties of the Aging Al-Li-Cu-Mg-Zr-Sc-Zn Alloy Subjected to Megaplastic Strain // Physics of Metals and Metallography. 2019. Vol. 120. No. 2. P. 157–163. DOI: 10.1134/S0031918X19020066.
    WoS  Scopus  in Russian

  408. Makarov A.V. Korshunov L.G. Metallophysical Foundations of Nanostructuring Frictional Treatment of Steels // Physics of Metals and Metallography. 2019. Vol. 120. No. 3. P. 303–311. DOI: 10.1134/S0031918X18120128.
    WoS  Scopus  in Russian

  409. Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Senaeva (Pugacheva) E.I. Malyigina I.Yu. Structure of Fe-Ni-Ti-C-B SHS Copmposites // Physics of Metals and Metallography. 2019. Vol. 120. No. 11. P. 1078-1084. DOI: 10.1134/S0031918X19110139.
    WoS  Scopus  in Russian

  410. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Goruleva L.S. Makarov A.V. Volkova E.G. Microstructure of a Laser-Welded Joint between a Chromium – Nickel Steel and a Titanium Alloy with a Copper Insert // Physics of Metals and Metallography. 2019. Vol. 120. No. 8. P. 775-781. DOI: 10.1134/S0031918X1908012X.
    WoS  Scopus  in Russian

  411. Prosviryakov E.Yu. Non-helical exact solutions to the Euler equations for swirling axisymmetric fluid flows // Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.].. 2019. Vol. 23. No. 4. P. 1–7. https://doi.org/10.14498/vsgtu1715.
    WoS  Scopus  in Russian

  412. Burmasheva N.V. Prosviryakov E.Yu. Convective layered flows of a vertically whirling viscous incompressible fluid. Velocity field investigation // Vestnik Samarskogo Gosudarstvennogo Tekhnicheskogo Universiteta, Seriya Fiziko-Matematicheskie Nauki. 2019. Vol. 23. No. 2. P. 341-360. DOI: 10.14498/vsgtu1670.
    WoS  Scopus  in Russian

  413. Vandyshev A.B. Kulikov V.A. Analysis of Membrane and Membrane-Catalytic Systems for Producing High-Purity Hydrogen from Ammonia // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 43-50. DOI: 10.1007/s10556-019-00581-1.
    WoS  Scopus  in Russian

  414. Vandyshev A.B. Kulikov V.A. Analysis of the Design Calculation of a Membrane-Catalytic Converterf or Producing High-Purity Hydrogenf rom Biodiesel Fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 3-4. P. 209-215. DOI: 10.1007/s10556-019-00607-8.
    WoS  Scopus  in Russian

  415. Vandyshev A.B. Kulikov V.A. Analysis of the Efficiency of a Pd/Ag Membrane with a Thickness of 2.25 Microns on a Porous Ceramic Substrate in a laboratory Membrane Reactor // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 31-37. DOI: 10.1007/s10556-019-00592-y.
    WoS  Scopus  in Russian

  416. Vandyshev A.B. Kulikov V.A. Analysis of the results of testing an individual disk-type membrane-catalytic module for obtaining high-purity hydrogen from methane // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 725-732. DOI: 10.1007/s10556-020-00686-y.
    WoS  Scopus  in Russian

  417. Vandyshev A.B. Kulikov V.A. Evaluation of design parameters for a 32-module disk-type membrane-catalytic reactor for producing high-purity hydrogen from diesel fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 815-820. DOI: 10.1007/s10556-020-00698-8.
    WoS  Scopus  in Russian

  418. Zubarev N.M. Prosviryakov E.Yu. Exact Solutions for the Layered Three-Dimensional Nonstationary Isobaric Flows of Viscous Incompressible Fluid // Journal of Applied Mechanics and Technical Physics. 2019. Vol. 60. No. 6.. 10.1134/S0021894419060075.
    WoS  Scopus  in Russian

  419. Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Deformation of 08G2B Steel before and at the Yield Plateau by Digital Image Correlation Technique. Part 1. Formation of Plastic and Elastic Deformation Waves // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 5-6. P. 274-279. DOI: 10.1007/s11041-019-00416-z.
    WoS  Scopus  in Russian

  420. Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Strain before and on the Yield Plateau of Steel 08G2B by Correlation of Digital Images. Part II. Functioning of Flow Channels and Zones in Them // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 7-8. P. 405-410. DOI 10.1007/s11041-019-00437-8.
    WoS  Scopus  in Russian

  421. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of frictional treatment on structure, micromechanical and tribological properties of 03Cr16Ni14Mo3Ti austenitic steel // Metal Science and Heat Treatment. 2019. No. 11-12.
    WoS  Scopus 

  422. Zalazinskiy A.G. Nesterenko A.V. Berezin I.M. Study of Compaction of the Titanium Powder by the Experimental-Analytical Method // Russian Journal of Non-Ferrous Metals. 2019. Vol. 60. No. 5. P. 499-503. https://dx.doi.org/10.3103/S1067821219050183.
    WoS  Scopus  in Russian

  423. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. Vopilkin A.Kh. Some Featuresinthe Behavior of Magnetic and Acoustic Characteristics of Hot-Rolled 08G2B Steelunder Cyclic Loading // Russian Journal of Nondestructive Testing. 2019. Vol. 55. No. 11. P. 827–836. DOI: 10.1134/S1061830919110044.
    WoS  Scopus  in Russian

  424. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Comparison of Magnetic Parameters of Quenched Pipe Steels with X-Ray–Evaluated Residual Macro- and Microstresses // Russian Journal of Nondestructive Testing. 2019. No. 5. P. 369-377. DOI: 10.1134/S1061830919050048.
    WoS  Scopus  in Russian

  425. Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
    WoS 

  426. Polilov A.N. Tatus N.A. Kamantsev I.S. Kuznetsov A.V. Akhmedshin E.Kh. Tian X. Reducing the Effect of Holes on the Bearing Capacity of Fiber-Reinforced Materials // AIP Conference Proceedings. 2019. Vol. 2176. 030010. – https://doi.org/10.1063/1.5135134.
    WoS 

  427. Babaylov N.A. Bogachev A.E. Korotkih S.A. Nefedova O.A. Spevak L.F. A BEM-Based Mathematical Model of the Human Cornea Stress-Strain State // AIP Conference Proceedings. 2019. Vol. 2176. 030001. – https://doi.org/10.1063/1.5135125.
    WoS 

  428. Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Unidirectional Convective Flows of a Viscous Incompressible Fluid with Slippage in a Closed Layer // AIP Conference Proceedings. 2019. Vol. 2176. 030023. – https://doi.org/10.1063/1.5135147.
    WoS 

  429. Burmasheva N.V. Prosviryakov E.Yu. Layered Convective Flows of Vertically Swirling Incompressible Fluid Affected by Tangential Stresses // AIP Conference Proceedings. 2019. Vol. 2176. 030025. – https://doi.org/10.1063/1.5135149.
    WoS 

  430. Burmasheva N.V. Prosviryakov E.Yu. Unidirectional Thermocapillary Flows of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2019. Vol. 2176. 030002. –https://doi.org/10.1063/1.5135126.
    WoS 

  431. Byval’tsev S. V. Zalazinskiy A.G. Shveikin V.P. An Intelligent System for Improving the Process of Hydromechanical Extrusion // AIP Conference Proceedings. 2019. Vol. 2176. 030003. –https://doi.org/10.1063/1.5135127.
    WoS 

  432. Emelyanov I.G. Mironov V.I. Hodak A.S. The Boundary Value Problem of Determining Hydrogen Concentration and the Stress State in a Titanium Shell // AIP Conference Proceedings. 2019. Vol. 2176. 030005. –https://doi.org/10.1063/1.5135129.
    WoS 

  433. Kazakov A.L. Spevak L.F. Numerical Study of Travelling Wave Type Solutions for the Nonlinear Heat Equation // AIP Conference Proceedings. 2019. Vol. 2176. 030006. – https://doi.org/10.1063/1.5135130.
    WoS 

  434. Klimova O.V. A Methodology for Parallel Implementation of the Basic Operations of Digital Signal Processing // AIP Conference Proceedings. 2019. Vol. 2176. 030007. – https://doi.org/10.1063/1.5135131.
    WoS 

  435. Koroleva (Chekhomova) L.F. Prosviryakov E.Yu. Models of Matter Self-Organization in Dissipative Kinetic Processes for Obtaining an Active Biomaterial with Transdermal Ability to Restore and Strengthen Bone Tissue // AIP Conference Proceedings. 2019. Vol. 2176. 030008. – https://doi.org/10.1063/1.5135132.
    WoS 

  436. Lookin N.A. Rubin L.S. Precision Nonlinear Low Current Meter // AIP Conference Proceedings. 2019. Vol. 2176. 020003. – https://doi.org/10.1063/1.5135115.
    WoS 

  437. Polyakov P.A. Polyakov A.P. The Effect of Zn, Cu, and C Alloying Microadditives on the Process of Compaction of Iron-Based Powders // AIP Conference Proceedings. 2019. Vol. 2176. 030011. – https://doi.org/10.1063/1.5135135.
    WoS 

  438. Privalova V.V. Prosviryakov E.Yu. An Inhomogeneous Couette-Type Flow with a Perfect Slip Condition at the Lower Boundary of an Infinite Fluid Layer // AIP Conference Proceedings. 2019. Vol. 2176. 030012. – https://doi.org/10.1063/1.5135136.
    WoS 

  439. Privalova V.V. Prosviryakov E.Yu. Convective Couette-Type Flows Under Condition of Slip and Heating at the Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030024. – https://doi.org/10.1063/1.5135148.
    WoS 

  440. Privalova V.V. Prosviryakov E.Yu. Exact Solution of the Convective Flow of a Viscous Fluid Layer with a Heated Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030022. – https://doi.org/10.1063/1.5135146.
    WoS 

  441. Pugacheva (Vandysheva) N.B. Guzanov B.N. Obabkov N.V. Bykova (Gurchenko) T.M. Michurov N.S. Studying the Structure and Adhesion Strength of Thermal Barrier Coating // AIP Conference Proceedings. 2019. Vol. 2176. 030013. – https://doi.org/10.1063/1.5135137.
    WoS 

  442. Pugacheva (Vandysheva) N.B. NikolinYu.V. Senaeva (Pugacheva) E.I. The Structure and Wear Resistance of a Ti-Ni-Fe-C-B Composite // AIP Conference Proceedings. 2019. Vol. 2176. 020007. – https://doi.org/10.1063/1.5135119.
    WoS 

  443. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of Low-Carbon Low-Alloyed Cr-Mo Pipe Steel Intended for Operating in Sour Environment // AIP Conference Proceedings. 2019. Vol. 2167. 020291. – https://doi.org/10.1063/1.5132158.
    WoS 

  444. Shveikin V.P. Evaluation of the Residual Life and Mechanical Properties of Steels with a Heterophase Structure // AIP Conference Proceedings. 2019. Vol. 2176. 030016. – https://doi.org/10.1063/1.5135140.
    WoS 

  445. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. Pestov A.V. Studying the Mechanical Properties of Epoxy Adhesive Coatings by Instrumented Indentation // AIP Conference Proceedings. 2019. Vol. 2176. – 020008. – https://doi.org/10.1063/1.5135120.
    WoS 

  446. Soboleva N.N. Makarov A.V. Skorynina P.A. Nikolaeva E.P. Malyigina I.Yu. The Effect of Load during Frictional Treatment with a DBN Indenter on the Surface Finish of the NiCrBSi–Cr3C2 Laser Clad Coating // AIP Conference Proceedings. 2019. Vol. 2167. 020345. – https://doi.org/10.1063/1.5132212.
    WoS 

  447. Struzhanov V.V. On One Inverse Problem in the Theory of Eigenstresses // AIP Conference Proceedings. 2019. Vol. 2176. 040015. – https://doi.org/10.1063/1.5135164.
    WoS 

  448. Struzhanov V.V. Korkin A.V. Quenching Stresses and Shaft Failure // AIP Conference Proceedings. 2019. Vol. 2176. 040012. – https://doi.org/10.1063/1.5135161.
    WoS 

  449. Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Gladkovsky S.V. Bukhvalov A.B. Khudorozhkova Yu.V. Cheremicina E.R. Gorkunov E.S. Nucleation and Initiation of Cracks under High-Cycle Fatigue in the EP679 Maraging Steel // AIP Conference Proceedings. 2019. Vol. 2176. 030019. – https://doi.org/10.1063/1.5135143.
    WoS 

  450. Zadvorkin S.M. Gorkunov E.S. Goruleva L.S. Putilova E. A. Maltseva A.N. Comparison of X-ray analysis and EBSD analysis methods for residual stresses estimation in welded pipes made of 13CrVA steel // AIP Conference Proceedings. 2019. Vol. 2167. 020397. – https://doi.org/10.1063/1.5132264.
    WoS 

  451. Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
    WoS 

  452. Salikhyanov D.R. Contact mechanism between dissimilar materials under plastic deformation // Comptes Rendus Mecanique. 2019. Vol. 347. P. 588-600. https://doi.org/10.1016/j.crme.2019.07.002.
    WoS 

  453. Emelyanov I.G. Thermodiffusion Problem of Determination of the Stress State of a Steel Shell Structure // E3S Web of Conferences. Advances in Intelligent Systems and Computing. Springer. 2019. Vol. 135. 03002. – https://doi.org/10.1051/e3sconf/201913503002.
    WoS 

  454. Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2019. Vol. 35. Iss. 3. P. 1037-1044. https://doi.org/10.1007/s00366-018-0649-8.
    WoS 

  455. Kirillova V.V. Prosviryakov E.Yu. Cardiac remodeling in patients with atrial fibrillation in chronic heart failure // Europace. March, 2019. Vol. 21. 381 p. ii 62. –DOI: https://doi.org/10.1093/europace/euz093.
    WoS 

  456. Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
    WoS 

  457. Kokovikhin E.A. Volkov V.P. Kamantsev I.S. Salikhyanov D.R. Plastometric Simulation of the Hot Rolling Process of Al/B4C Powder Composite // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 99-105. DOI: 10.18502/keg.v1i1.4396.
    WoS 

  458. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
    WoS 

  459. Kazakov A.L. Kuznetsov P.A. Lempert A.A. Spevak L.F. Analytical and numerical solutions to the problem on a heat wave initiating for the nonlinear heat equation with a source // IOP Conf. Series: Journal of Physics: Conf. Series. 2019. Vol. 1268. 012030. – DOI:10.1088/1742-6596/1268/1/012030.
    WoS 

  460. Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
    WoS 

  461. Kazakov A.L. Spevak L.F. Lempert  A.A. Nefedova O.A. A computational algorithm for constructing a two-dimensional heat wave generated by a non-stationary boundary condition // IOP Conference Series: Journal of Physics: Conference Series. 2019. Vol. 1392. 012083. – DOI:10.1088/1742-6596/1392/1/012083.
    WoS 

  462. Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
    WoS 

  463. Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
    WoS 

  464. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
    WoS 

  465. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
    WoS 

  466. Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
    WoS 

  467. Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
    WoS 

  468. Vladimir Vykhodets Nefedova O.A. Kurennykh Tatiana Obukhov Sviatoslav Vykhodets Yevgenia Quantum Diffusion of Deuterium in Sodium // Journal of Physical Chemistry A. 2019. Vol. 123. P. 7536-7539. DOI: 10.1021/acs.jpca.9b06231.
    WoS 

  469. Kazakov A.L. Spevak L.F. Nefedova O.A. Solving a two-dimensional problem of heat wave initiation by a boundary condition specified on a movable manifold // Journal of Physics: Conf. Series. 2019. Vol. 1268. 012031. – DOI: 10.1088/1742-6596/1268/1/012031.
    WoS 

  470. Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
    WoS 

  471. Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
    WoS 

  472. Emelyanov I.G. Polyakov A.A. Hodak  A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
    WoS 

  473. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. The Influence of Zero-to-Tension Loading on Magnetic and Acoustic Properties of 08G2B Hot-Rolled Steel // Journal of Physics: Conference Series. 2019. Vol. 1389. 012036. – https://doi.org/10.1088/1742-6596/1389/1/012036.
    WoS 

  474. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2019. DOI: 10.1007/s42417-019-00183-4.
    WoS 

  475. Gladkovsky S.V. Petrova (Kuteneva) S.V. Sergeev S.N. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding // Materials Characterization. 2019. Vol. 154. P. 294–303. https://doi.org/10.1016/j.matchar.2019.06.008.
    WoS 

  476. Krylova S.Е. Romashkov Е.V. Gladkovsky S.V. Kamantsev I.S. Special aspects of thermal treatment of steel for hot forming dies production // Materials Today: Proceedings. 2019. Vol. 19. P. 2540-2544. https://doi.org/10.1016/j.matpr.2019.08.197.
    WoS 

  477. Filippov M.A. Sharapova V.A. Shveikin V.P. The effect of heat treatment on the ledeburitic class alloy abrasive wear-resistance // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 2581-2583. https://doi.org/10.1016/j.matpr.2019.08.252.
    WoS 

  478. Byval’tsev S. V. The mechanism of oxide film formation for drawing titanium // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 1949-1952. https://doi.org/10.1016/j.matpr.2019.07.048.
    WoS 

  479. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
    WoS  in Russian

  480. Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109.
    WoS  in Russian

  481. Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu  Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
    WoS 

  482. Prokhorov A. Plekhov O. Sudakov A. Gladkovsky S.V. Petrova (Kuteneva) S.V. Experimental study of high-strength steel under VHCF with external alternating magnetic field // Procedia Structural Integrity. 2019. Iss. 18. P. 802-808. 10.1016/j.prostr.2019.08.229.
    WoS 

  483. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Effect of cyclic loading on the magnetic behavior of hot-rolled pipe steel 08G2B // Procedia Structural Integrity. 2019. Vol. 20. P. 4-8. 10.1016/j.prostr.2019.12.107.
    WoS 

  484. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Increasing the Quality of Transient Processes in the Vehicle Transmission // Science & Technique. 2019. Vol. 18. No. 6. P. 509-518. https://doi.org/10.21122/2227-1031-2019-18-6-509-518.
    WoS 

  485. Filimonov A.Y. Trishin V.N. Model-Oriented Co-design of Homogeneous Computing Systems // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2019. No. 48. P. 67-73. DOI: 10.17223/19988605/48/8.
    WoS  in Russian

  486. Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solution of Aluminum and Iron Oxides, DOI 10.1134/50002337X19060071 // Inorganic Materials. 2019. Vol. 55, No. 6. P. 556-562.
    WoS 

  487. Grokhovsky V.I. Gladkovsky S.V. Brittle fracture resistance of chinga and seymchan meteorites under static and impact loading // Meteoritics & Planetary Science. 2019. Vol. 54. Suppl. 2. – WOS: 000472113600138.
    WoS 

  488. Privalova V.V. Prosviryakov E.Yu. Simonov M.A. An Exact Solution for the Description of the Gradient Flow of a Vortex Fluid // AIP Conference Proceedings. 2019. Vol. 2176. – 020012. https://doi.org/10.1063/1.5135124.
    WoS 

  489. Volkov V.P. Salikhyanov D.R. On Ring Deformation be Internal Pressure // Izvestiya Ferrous Metallurgy. 2019. Vol. 62. Iss. 3. P. 195-200. DOI: 10.17073/0368-0797-2019-3-195-200.
    Scopus  in Russian

  490. Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
    Scopus  in Russian

  491. Privalova V.V. Prosviryakov E.Yu. Simonov M.A. Nonlinear Gradient Flow of a Vertical Vortex Fluid in a Thin Layer // Russian Journal of Nonlinear Dynamics. 2019. Vol. 15. No. 3. P. 271-283. DOI: 10.20537/nd190306.
    Scopus 

  492. Fot A.P. Kamenev S.V. Krylova S.E. Tarova M.Yu. Gladkovsky S.V. Kamantsev I.S. Durability forecasting for the links plates of driving roller chains // Vestnik mashinostroeniya. 2019. № 2. P. 49-54.
    РИНЦ  in Russian

  493. Kruchkov D.I. Berezin I.M. Petunin A.A. Computer Simulation of the Stamping of a Long Sheet Blank of a Spherical Tank Element // Vestnik mashinostroeniya. 2019. № 2. P. 28-31.
    РИНЦ  in Russian

  494. Privalova V.V. Prosviryakov E.Yu. Nonlinear isobaric flow of a viscous incompressible fluid in a thin layer with permeable boundaries // Vichislitel’naya mekhanika sploshnyh sred. 2019. Vol. 12. No. 2. P. 230-242. DOI: 10.7242/1999-6691/2019.12.2.20.
    РИНЦ  in Russian

  495. Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
    РИНЦ  in Russian

  496. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Partin A.S. A Concept of Decision Making for Computer-Aided Arrangement of Parts within a Forging // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2019. No. 8. P. 37-44.
    РИНЦ  in Russian

  497. Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
    РИНЦ  in Russian

  498. Blagonravov A.A. Yurkevich A.V. Ensuring the highest possible energy efficiency of cars in urban traffic // Vestnik mashinostroeniya. 2019. No. 11. P. 47-49. DOI: 10.18411/B100-22011-T20191106.
    РИНЦ  in Russian

  499. L.N. Belsky Gorkunov E.S. S.F. Deryugin Lookin N.A. Life is a Relentless Creativity. On the 100th Anniversary of the Birth of Academician N.A. Semikhatov // Vestnik Rossiiskoi akademii nauk. 2019. Vol. 89. No. 1. P. 73-82.
    РИНЦ  in Russian

  500. Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
    WoS  Scopus 

  501. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Interactive communication between the user and the computer-aided design system of shaft forging on presses. 2018. Vol. 224. 04001. DOI: https://doi.org/10.1051/matecconf/201822404001.
    WoS  Scopus 

  502. Prosviryakov E.Yu. New Class of Exact Solutions of Navier-Stokes Equations with Exponential Dependence of Velocity on Two Spatial Coordinates. 2018. Vol. 53. No. 1. P. 107-114. DOI: 10.1134/S0040579518060088.
    WoS  Scopus  in Russian

  503. Filippov M.A. Nikiforova S.M. Shveikin V.P. Sharapova V.A. Heat Treatment Forming a Dissipative Metal Base in Wear-Resistant Chromium-Alloyed Cast Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030016. – https://doi.org/10.1063/1.5084377.
    WoS  Scopus 

  504. Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2018. https://doi.org/10.1007/s00366-018-0649-8.
    WoS  Scopus 

  505. Kirillova V. Prosviryakov E.Yu. Diastolic dysfunction of the right ventricle as an early diagnostic marker of heart failure // European Journal of Heart Failure. 2018. Vol. 20 (Suppl. S1). P. 223-224. DOI: 10.1002/ejhf.1197.
    WoS  Scopus 

  506. Gorshkov A.V. Prosviryakov E.Yu. Ekman Convective Layer Flow of a Viscous Incompressible Fluid // Izvestiya. Atmospheric and Oceanic Physics. 2018. Vol. 54. – No. 2. P. 189–19. DOI: 10.7868/S0003351518020101.
    WoS  Scopus 

  507. Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
    WoS  Scopus 

  508. Vykhodets V.B. Nefedova O.A. Obukhov S.I. Kurennykh T.E. Danolov S.E. Vykhodets E.V. Application of the Nuclear Reaction Analysis Online Technique to Study the Diffusion of Deuterium in Metals // Journal of Experimental and Theoretical Physics Letters (JETP Letters). 2018. Vol. 107. – No. 4. P. 211-215.
    WoS  Scopus 

  509. Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
    WoS  Scopus 

  510. Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
    WoS  Scopus 

  511. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
    WoS  Scopus 

  512. Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
    WoS  Scopus 

  513. Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
    WoS  Scopus 

  514. Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
    WoS  Scopus 

  515. Gorkunov E.S. Application of Magnetoelastic Effects to the Evaluation of Elastic and Plastic Strains in Steel Structural Memebers // Matec Web of Conferences. 2018. V. 145. 05001. DOI: https://doi.org/10.1051/matecconf/201814505001.
    WoS  Scopus 

  516. Gorkunov E.S. Povolotskaya A.M. Pavel Nosov Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material Magnetized by U-Shaped Electromagnets of Different Geometric Dimensions Types // Matec Web of Conferences. 2018. V. 145. 05002. DOI: https://doi.org/10.1051/matecconf/201814505002.
    WoS  Scopus 

  517. Gorkunov E.S. Zadvorkin S.M. Povolotskaya A.M. Igor Veselov Studying the effect of elastic-plastic strain and hydrogen sulphide on the magnetic behaviour of pipe steels as applied to their testing // Matec Web of Conferences. 2018. V. 145. 05003. DOI: https://doi.org/10.1051/matecconf/201814505003.
    WoS  Scopus 

  518. Ogorelkov D. A. Mironov V.I. Lukashuk O. Durability of Metal Structures under Quasi-Static Load // MATEC Web of Conferences // MATEC Web of Conferences. 2018. V. 224. 02091. doi.org/10.1051/matecconf/201822402091.
    WoS  Scopus 

  519. Putilova E. A. Gorkunov E.S. Zadvorkin S.M. Investigation of the Structure, Phase Composition and Physical-Mechanical Characteristics of High-Strength Laminated Materials Which Contain Corrosion-Resistant Steels with High Nitrogen Content // Matec Web of Conferences. 2018. V. 145. 05004. https://doi.org/10.1051/matecconf/201814505004.
    WoS  Scopus 

  520. Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
    WoS  Scopus 

  521. Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
    WoS  Scopus 

  522. Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
    WoS  Scopus 

  523. Tabatchikova T.I. Lepikhin S.V. Morozov A.N. Gudnev N.Z. Structure and Mechanical Properties of Steel Welding Joints Produced Using Abrasive Waterjet Cutting // Physics of Metals and Metallography. 2018. Vol. 119. – No. 7. P. 691-699.
    WoS  Scopus 

  524. Prosviryakov E.Yu. Spevak L.F.  Layered Three-Dimensional NonUniform Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2018. Vol. 52. No. 5. P. 765-770. DOI: 10.1134/S0040579518050391.
    WoS  Scopus 

  525. Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
    WoS  Scopus 

  526. Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
    WoS  Scopus 

  527. Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
    WoS  Scopus 

  528. Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of seymchan and chinga meteorites // Meteoritics & Planetary Science. 2018. Vol. 53. P. 6276-6276.
    WoS  Scopus 

  529. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.
    WoS  Scopus 

  530. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Distribution of Magnetic Flux in a Ferromagnetic Material in the Presence of a Nonferromagnetic Gap in the Composite Circuit // Russian Journal of Nondestructive Testing. 2018. Vol. 54. No. 12. P. 861-870. DOI: 10.1134/S1061830918120069.
    WoS  Scopus  in Russian

  531. Shabashov V.A. Gavrilov N.V. Kozlov K.A. Makarov A.V. Titova S.G. Voronin V.I. Structure of the surface layers of metastable austenitic stainless steel nitrided in electron beam plasma // The Physics of Metals and Metallography. 2018. V. 119. – No. 8. – P. 755-763. – DOI: 10.1134/S0031918X18080124.
    WoS  Scopus 

  532. Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
    WoS  Scopus 

  533. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
    WoS  Scopus 

  534. Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
    WoS  Scopus 

  535. Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638.
    WoS  VAC list 

  536. Prosviryakov E.Yu. Dynamic equilibria of a nonisothermal fluid // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. DOI: 10.14498/vsgtu1651.
    WoS  VAC list 

  537. Skorynina P.A. Makarov A.V. Volkova  E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
    WoS 

  538. Loginov Yu.N. Babaylov N.A. Polyansky L.I. Pervukhina D.N. Briquette Compacting in Container with a Small Taper Angle // AIP Conference Proceedings. 2018. Vol. 2053. – 040053. – https://doi.org/10.1063/1.5084491.
    WoS 

  539. Lezhnin N.V. Makarov A.V. Gavrilov  N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
    WoS 

  540. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Analysis of the Stress-Strain State of a Tool during Hydromechanical Extrusion // AIP Conference Proceedings. 2018. Vol. 2053. 040001. https://doi.org/10.1063/1.5084439.
    WoS 

  541. Burmasheva N.V. Prosviryakov E.Yu. Investigation of a Velocity Field for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040011. – https://doi.org/10.1063/1.5084449.
    WoS 

  542. Burmasheva N.V. Prosviryakov E.Yu. Investigation of Temperature and Pressure Fields for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040012. – https://doi.org/10.1063/1.5084450.
    WoS 

  543. Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
    WoS 

  544. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
    WoS 

  545. Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Dvoynikov D.A. Kuznetsov A.V. Layered Metal Composites with High Resistance to Brittle Fracture at Low Temperatures // AIP Conference Proceedings. 2018. Vol. 2053. 020003. https://doi.org/10.1063/1.5084349.
    WoS 

  546. Gladkovsky S.V. Petrova (Kuteneva) S.V. Dvoynikov D.A. Veselova V.E. Parametrization of Powder for Al/B4C Metal Matrix Composites Using the Static Image Analysis Method // AIP Conference Proceedings. 2018. Vol. 2053. – 040026. – https://doi.org/10.1063/1.5084464.
    WoS 

  547. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material with the Variation of the Magnetizer Dimensions and the Nonferromagnetic Gap Value // AIP Conference Proceedings. 2018. Vol. 2053. 020004. https://doi.org/10.1063/1.5084350.
    WoS 

  548. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Correlation of Residual Stresses with Magnetic Properties of Armco Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030022. – https://doi.org/10.1063/1.5084383.
    WoS 

  549. Gorshkov A.V. Prosviryakov E.Yu. Isobaric Vortex Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2018. Vol. 2053. – 040030. – https://doi.org/10.1063/1.5084468.
    WoS 

  550. Gorshkov A.V. Prosviryakov E.Yu. Large-Scale Convection Flow of an Incompressible Fluid on a Rotating Inclined Plane // AIP Conference Proceedings. 2018. Vol. 2053. – 040029. – https://doi.org/10.1063/1.5084467.
    WoS 

  551. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Checking of Subjective Decisions Obtained by Computer-Aided Design of Forgings // AIP Conference Proceedings. 2018. Vol. 2053. – 040040. – https://doi.org/10.1063/1.5084478.
    WoS 

  552. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Ontology of the Input Language for Computer-Aided Design of Shaft Forging on Presses // AIP Conference Proceedings. 2018. Vol. 2053. – 040039. – https://doi.org/10.1063/1.5084477.
    WoS 

  553. Kazakov A.L. Kuznetsov P.A. Spevak L.F. A Heat Wave Problem for a Degenerate Nonlinear Parabolic Equation with a Specified Source Function // AIP Conference Proceedings. 2018. Vol. 2053. – 030024. – https://doi.org/10.1063/1.5084385.
    WoS 

  554. Khalevitskiy Yu.V. Konovalov A.V. Partin A.S. On Convergence of Various Iterative Linear Solvers in Heterophase Elastoplastic Media Deformation Models // AIP Conference Proceedings. 2018. Vol. 2053. 030026. https://doi.org/10.1063/1.5084387.
    WoS 

  555. Khudorozhkova Yu.V. Cheremicina E.R. The Effect of a Dispersed Grain Structure of Hypoeutectoid, Eutectoid and Hypereutectoid Carbon Steels on Their Magnetic Behavior // AIP Conference Proceedings. 2018. Vol. 2053. 040042. https://doi.org/10.1063/1.5084480.
    WoS 

  556. Konovalov D.A. Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Determining AlMg6/10%SiCp Representative Elementary Volume Size by Kinetic Indentation // AIP Conference Proceedings. 2018. Vol. 2053. 040045. https://doi.org/10.1063/1.5084483.
    WoS 

  557. Kuznetsov A.V. Drukarenko N.A. Kamantsev I.S. Mironov V.I. Experimental Evaluation of Crack Growth Modeling Results in a Gray Pig Iron Plate // AIP Conference Proceedings. 2018. Vol. 2053. 030033. https://doi.org/10.1063/1.5084394.
    WoS 

  558. Makarov A.V. Savrai R.A. Malyigina I.Yu. Volkova E.G. Burov S.V. Nanostructuring and Surface Hardening of Structural Steels by Ultrasonic Impact-Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 020006. – https://doi.org/10.1063/1.5084352.
    WoS 

  559. Makarov A.V. Soboleva N.N. Gibzun M.S. Malyigina I.Yu. Korobov Yu.S. Increasing the Resistance of a NiCrBSi Coating to Heat Wear by Means of Combined Laser Heat Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 030037. – https://doi.org/10.1063/1.5084398.
    WoS 

  560. Michurov N.S. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Igumnov A.S. Contribution of Intermetallics to the Formation of the Stress-Strain State of Tensile Welds on the AISI 321 Steel and the Grade 2 Titanium Alloy with a Copper Insert // AIP Conference Proceedings. 2018. Vol. 2053. – 040058. – https://doi.org/10.1063.
    WoS 

  561. Mironov V.I. Ogorelkov D. A. Yakovlev V.V. Influence of Structural Damping on the Durability of a Crane Metal Construction // AIP Conference Proceedings. 2018. Vol. 2053. – 040060. – https://doi.org/10.1063/1.5084498.
    WoS 

  562. Polyakov A.P. A Model of the Dynamic Powder Compaction Process // AIP Conference Proceedings. 2018. Vol. 2053. 040073. https://doi.org/10.1063/1.5084511.
    WoS 

  563. Polyakov P.A. Mushnikov A.N. Polyakov A.P. Magnetic Properties of Iron-Based Vanadium-Containing Powder Composites Blended with Zn, Cu, P, and C // AIP Conference Proceedings. 2018. Vol. 2053. 040075. https://doi.org/10.1063/1.5084513.
    WoS 

  564. Polyakov P.A. Polyakov A.P. Studying the Hardness and Plasticity of Iron-Based Powder Compositions by Microindentation // AIP Conference Proceedings. 2018. Vol. 2053. 040074. https://doi.org/10.1063/1.5084512.
    WoS 

  565. Privalova V.V. Prosviryakov E.Yu. Exact Solutions for Three-Dimensional Nonlinear Flows of a Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040077. – https://doi.org/10.1063/1.5084515.
    WoS 

  566. Privalova V.V. Prosviryakov E.Yu. Linear Heating of the Upper Boundary of a Fluid Layer in the Case of Stationary Nonisothermal Couette Flow // AIP Conference Proceedings. 2018. Vol. 2053. – 040078. – https://doi.org/10.1063/1.5084516.
    WoS 

  567. Prosviryakov E.Yu. A New Exact Solution for Convective Flows of a Rotating Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. 020012. https://doi.org/10.1063/1.5084358.
    WoS 

  568. Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
    WoS 

  569. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
    WoS 

  570. Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.
    WoS 

  571. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
    WoS 

  572. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. The Diagnostics of the Influence of Elasto-Plastic Deformation on the Structure and Physical-Mechanical Properties of the High Strength Laminated Materials Used in Severe Arctic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020248. https://doi.org/10.1063/1.5083491.
    WoS 

  573. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of the Perspective High-Strength Low Alloy Steel for the Oil Country Tubular Goods Operated for Extreme Climatic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020249. https://doi.org/10.1063/1.5083492.
    WoS 

  574. Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
    WoS 

  575. Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
    WoS 

  576. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. Kogan L.Kh. Malyigina I.Yu. Osinceva A.L. Eddy-Current Testing of Fatigue Degradation in Additionally Heat-Treated Gas Powder Laser Clad NiCrBSi Coating under Contact Fatigue Loading // AIP Conference Proceedings. 2018. Vol. 2053. – 040088. – https://doi.org/10.1063/1.5084526.
    WoS 

  577. Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
    WoS 

  578. Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.
    WoS 

  579. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.
    WoS 

  580. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.
    WoS 

  581. Solovei V.D. Construction of Velocity Disturbances for a Special Stationary Flow of a Viscoplastic Strip under Rolling // AIP Conference Proceedings. 2018. Vol. 2053. – 030069. – https://doi.org/10.1063/1.5084430.
    WoS 

  582. Spevak L.F. Nefedova O.A. Parallel Technology for Solving the Poisson Equation in Axisymmetric Domains by the Boundary Element Method // AIP Conference Proceedings. 2018. Vol. 2053. – 030070. – https://doi.org/10.1063/1.5084431.
    WoS 

  583. Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.
    WoS 

  584. Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
    WoS 

  585. Vladimirov A.P. Drukarenko N.A. Kamantsev I.S. Trishin V.N. Lookin N.A. Real-time study of high-cycle fatigue damage using the averaged speckle dynamics // IOP Conf. Series: Journal of Physics: Conf. Series. 2018. Vol. 1149. 012013. DOI:10.1088/1742-6596/1149/1/012013.
    WoS 

  586. Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
    WoS 

  587. Sergeev S.N. Safarov I.M. Galeyev R.M. Gladkovsky S.V. Dvoynikov D.A. Rogozhkin S.V. Iskandarov А.А. Korznikova G.F. Analysis of the Distribution of Alloying Elements in Ultrafine-Grained Steel 05G2MFBT by Atom-Probe Tomography // IOP Conference Series: Materials Science and Engineering. 2018. Vol. 447. 012009. doi:10.1088/1757-899X/447/1/012009.
    WoS 

  588. Abdulov Sergei Trusevich Ilya Volkov A.A. Ensuring the amphibious capabilities of the amphibious vehicle based on the hydrodynamic buoyancy principle // MATEC Web of Conferences. 2018. Vol. 224. 02030. https://doi.org/10.1051/matecconf/201822402030.
    WoS 

  589. Abdulov Sergey Taratorkin A.I. Nenashev Pavel Dynamic loading of a water jet propulsion drive of amphibious vehicles // MATEC Web of Conferences. 2018. Vol. 224 02042 https://doi.org/10.1051/matecconf/201822402042..
    WoS 

  590. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Stability of the dynamic shifting process in the vehicle transmission with the input shaper // MATEC Web of Conferences. 2018. Vol. 211 02007 https://doi.org/10.1051/matecconf/201821102007.
    WoS 

  591. Taratorkin I.A. Derzhanskii Victor Taratorkin A.I. Oscillation damping in the power unit when starting the engine equipped with the Common Rail system // MATEC Web of Conferences. 2018. Vol. 224. 02037. https://doi.org/10.1051/matecconf/201822402037.
    WoS 

  592. Taratorkin I.A. Derzhanskii Victor Volkov A.A. Stabilization of transport tracked vehicle trajectory // MATEC Web of Conferences. 2018. Vol. 224. 02038. https://doi.org/10.1051/matecconf/201822402038.
    WoS 

  593. Saraev Yu.N. Gladkovsky S.V. Lepikhin S.V. Kamantsev I.S. Lunev A.G. Perovskaya. Investigation of the influence of energy parameter of the covered-electrode welding on the impact strength characteristics and cracking resistance of the welded joints obtained // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science.. 2018. Vol. 20. No. 2. P. 100-115. DOI: 10.17212/1994-6309-2018-20.2-100-115.
    WoS 

  594. Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
    WoS 

  595. Vladimirov A.P. Mikhailova Yu.A. Drukarenko N.A. Dynamic speckle interferometry of technical and thin biological objects // Proceedings of SPIE. 2018. Vol. 10834. Speckle 2018: VII International Conference on Speckle Metrology, 1083427. DOI: 10.1117/12.2319729.
    WoS 

  596. Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638.
    WoS 

  597. Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.
    WoS 

  598. Taratorkin A.I. Taratorkin I.A. Derzhanskiy V.B. Alexander V. Oscillation elimination method in transient processes of controlling the transport vehicle transmission // In Proc. of the 37th FISITA World Automotive Congress 2018. Код 142293. – 2-s2.0-85057971568.
    Scopus 

  599. Saraev Y.N. Gladkovsky S.V. Lunev A.G. Perovskaya  M.V. Semenchuk V.M. Features of Formation of Structure and Physical and Mechanical Properties of Permanent Welded Joints of Low-Alloy Steels by Methods of Adaptive Pulse Control of Energy Parameters of Welding Mode // Materials Science Forum. 2018. Vol. 938. P. 124-131. DOI: 10.4028/www.scientific.net/MSF.938.124.
    Scopus 

  600. Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
    Scopus 

  601. Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
    Scopus 

  602. Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
    Scopus 

  603. Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
    Scopus 

  604. Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
    Scopus 

  605. Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
    Scopus 

  606. Vladimirov A.P. Ponosov Yu.S. Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue // PNRPU Mechanics Bulletin. 2018. No. 3. P. 138-146. DOI: 10.15593/perm.mech/2018.3.13.
    Scopus 

  607. Privalova V.V. Prosviryakov E.Yu. Steady convective Coutte flow for quadratic heating of the lower boundary fluid layer // Rus. J. Nonlin. Dyn. 2018. Vol. 14. No. 1. P. 69-79.
    Scopus 

  608. Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
    Scopus 

  609. Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
    Scopus 

  610. Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
    РИНЦ 

  611. Druzhinin A.V. Vladimirov A.P. Tsvetkova E.V. Teoretical Bases of Magnetooptical Refractometry for Transparent Media [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 83-89. DOI: 10.17804/2410-9908.2018.6.083-089.
    РИНЦ 

  612. Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
    РИНЦ 

  613. Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
    РИНЦ 

  614. Muizemnek O.Yu. Konovalov A.V. Kanyukov S.I. Computer-Aided Intersubjective Assignment of Overlaps for Shaft-Type Forgings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 14-23. DOI: 10.17804/2410-9908.2018.3.014-023.
    РИНЦ 

  615. Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
    РИНЦ 

  616. Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
    РИНЦ 

  617. Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
    РИНЦ 

  618. Privalova V.V. Prosviryakov E.Yu. Exact Solutions for a Couette–Hiemenz Creeping Convective Flow with Linear Temperature Distribution on the Upper Boundary [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 92-109. DOI: 10.17804/2410-9908.2018.2.092-109.
    РИНЦ 

  619. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
    РИНЦ 

  620. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Mushnikov A.N. Studying the Effect of Plastic Deformation on the Mechanical and Magnetic Characteristics of High-Strength Bimetal Materials Intended for Use in the Arctic Climate [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. ss. 6. P. 136-14. DOI: 10.17804/2410-9908.2018.6.136-148.
    РИНЦ 

  621. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
    РИНЦ 

  622. Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
    РИНЦ 

  623. Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
    РИНЦ 

  624. Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
    РИНЦ 

  625. Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
    РИНЦ 

  626. Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
    РИНЦ 

  627. Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
    РИНЦ 

  628. Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
    РИНЦ 

  629. Rozhkova E.A. Gorshkov A.V. Prosviryakov E.Yu. Layered Marangoni Convection during Heat Transfer According to the Newton’s Law of Cooling. Part 1. Investigation of the Velocity Field // Khimicheskaya fizika i mezoskopiya. 2018. Vol. 20. No. 1. P. 15-27. DOI:10.20537/nd1801007.
    РИНЦ 

  630. Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
    РИНЦ 

  631. Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
    РИНЦ 

  632. Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
    РИНЦ 

  633. Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
    РИНЦ 

  634. Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
    РИНЦ 

  635. Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
    РИНЦ 

  636. Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
    РИНЦ 

  637. Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
    РИНЦ 

  638. Mushnikov A.N. Kryucheva K. Modeling of Magnetic Hysteresis under Weak Magnetic Fields and Triaxial Stress State // International Scientific Journal “Mathematical Modeling”. 2018. Year II. – Issue 3. P. 102-104.

  639. Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.

  640. Loginov Yu.N. Babaylov N.A. Polyanskii L.I. Effect of the Precompaction Pressure on the Density Distribution in a Metallurgical Briquette during Roller Pressing // Metallurgist. 2017. Vol. 61. No. 9-10. P. 849-852. DOI 10.1007/s11015-018-0574-5.
    WoS  Scopus 

  641. Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
    WoS  Scopus 

  642. Gorkunov E.S. Димитров Р.З. Миховски М.М. Магнитна дефектоскопия, структуроскопия, фазометрия / Национально научно-техническо дружество по дефектоскопия. Болгария, София, 2017. 241 p. ISBN: 978-619-90662-1-8.

  643. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Subachev Yu.V. Peculiarities of the Magnetic Behavior of Pipe Steels with Different Initial Stress-Strain States under Elastic Deformation // Dynamics and Control of Advanced Structures and Machines. – Chapter 17. – P. 153-160. – DOI 10.1007/978-3-319-43080-5_17. – ISBN 978-3-319-43079-9 ISBN 978-3-319-43080-5 (eBook). – Publisher: Springer International Publishing Switzerland 2017. – Editors: Alexander K. Belyaev, Hans Irschik, Michael Kromme. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.). 2017. 235 p.
    Full text>>

  644. Vladimirov A.P. Alexey A. Bakharev Dynamic Speckle Interferometry of Thin Biological Objects: Theory, Experiments and Practical Perspectives // Optical Interferometry. – Chapter 6. – P. 103-141. – http://dx.doi.org/chapter/10.5772/66712. – http://dx.doi.org/chapter/10.5772/63683. – Publisher: INTECH, 2017. – Edited by Alexander A. Banishev, Mithun Bhowmick and Jue Wang. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.), Print ISBN: 978-953-51-2955-4. Online ISBN: 978-953-51-2956-1. 2017. 249 p.

  645. Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped calcium carbonate-phosphate used for bone tissue technology // Integrative Clinical Medicine, ISSN: 2515-0219, doi: 10.15761/ICM.1000108. 2017. V. 1(2). P. 1-7.

  646. Polyakov P.A. A.V. Dolmatov Kolmyikov V.L. O.V. Romanova M.N. Zakharov Effect of Sintering on the Strength of Iron-Based Powder Composites [Electronic resource] – DOI: 10.17804/2410-9908.2017.1.013-023. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 13-23.

  647. Yu.N. Saraev Gladkovsky S.V. S.V. Lepkhin Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of Welding Technology on Structure, Mechanical Properties and Fracture Toughness of 09G2S Steel Welded Joints [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. –DOI: 10.17804/2410-9908.2017.5.023-042. 2017. Iss. 5. P. 23-42.

  648. Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.

  649. Aleksandr Blokhin Arcadiy Nedyalkov Lev Barakhatov Taratorkin A.I. Abram Kropp Multistage Mechanical Transmissions with Automatic Control for Advanced Trucks and Buses . – DOI 10.1515/ama-2017-0040 // Acta Mechanica et Automatica. 2017. Vol. 11. – No. 4. P. 260-266.

  650. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.

  651. Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004.
    Full text>>

  652. Yu.N. Loginov A.E. Pervukhin Babaylov N.A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing // AIP Conf. Proc. 2017. Vol. 1915. – 040032.
    Full text>>

  653. E.N. Shipacheva A.A. Petunin Berezin I.M. A Genetic Algorithm Used for Solving One Optimization Problem // AIP Conf. Proc. 2017. Vol. 1915. – 040052.
    Full text>>

  654. Yu.N. Loginov Babaylov N.A. L.I. Polyansky The Properties of Coke Breeze Briquettes Produced by Ram Briquetting // AIP Conf. Proc. 2017. Vol. 1915. – 040034.
    Full text>>

  655. Yu.N. Saraev Gladkovsky S.V. Lepikhin S.V. Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of the Welding Method on the Impact Strength and Cyclic Fracture Toughness Parameters of the 09G2S Steel // AIP Conf. Proc. 2017. Vol. 1915. – 030024.
    Full text>>

  656. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Mathematical Modeling of Hydromechanical Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 040001.
    Full text>>

  657. Belozerov G. A. Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. A.V. Perminova Effect of Strain Rate on the Formation of the Microstructure of a 1950/10% SiC Metal Matrix Composite under High Temperature // AIP Conf. Proc. 2017. Vol. 1915. – 030002.
    Full text>>

  658. Berezin I.M. Polyakov A.P. Polyakov P.A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 030003.
    Full text>>

  659. Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for the Layered Convection of a Viscous Incompressible Fluid at Specified Temperature Gradients and Tangential Forces on the Free Boundary // AIP Conf. Proc. 2017. Vol. 1915. – 040005.
    Full text>>

  660. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011.
    Full text>>

  661. Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Veselova V.E. M.A. Ryzhkov The Thermal Expansion and Thermophysical Properties of an Aluminum and Al/B4C composite // AIP Conf. Proc. 2017. Vol. 1915. – 030005.
    Full text>>

  662. Gorkunov E.S. Evaluating Structural and Phase Changes in Individual Layers of Multilayer Products with the use of Differential Magnetic Permeability // AIP Conf. Proc. 2017. Vol. 1915. – 020002.
    Full text>>

  663. Gorkunov E.S. E.I. Yakushenko Zadvorkin S.M. Mushnikov A.N. Analytical Description of Changes in the Magnetic States of Chromium-Nickel Steel under Uniaxial Elastic Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 040018.
    Full text>>

  664. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Differential Evaluation of the Magnetic State of Wire Packages // AIP Conf. Proc. 2017. Vol. 1915. – 040017.
    Full text>>

  665. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Specific Features of the Determination of Residual Stresses in Materials by Diffraction Techniques // AIP Conf. Proc. 2017. Vol. 1915. – 030006.
    Full text>>

  666. Gorshkov A.V. Prosviryakov E.Yu. Complex Large-Scale Convection of a Viscous Incompressible Fluid with Heat Exchange According to Newton’s Law // AIP Conf. Proc. 2017. Vol. 1915. – 040019.
    Full text>>

  667. Gorshkov A.V. Prosviryakov E.Yu. Convective Flow in the Solid Rotation of a Viscous Incompressible Fluid // AIP Conf. Proc. 2017. Vol. 1915. – 040020.
    Full text>>

  668. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Intersubjective Decision-Making for Computer-Aided Forging Technology Design // AIP Conf. Proc. 2017. Vol. 1915. – 040022.
    Full text>>

  669. Kazakov A.L. A.A. Lempert P.A. Kuznetsov On the Analytic Solvability of a Special Boundary Value Problem for the Nonlinear Heat Equation // AIP Conf. Proc. 2017. Vol. 1915. – 020003.
    Full text>>

  670. Khalevitskiy Yu.V. Konovalov A.V. Burmasheva N.V. Partin A.S. Linear Solver Performance in Elastoplastic Problem Solution on GPU Cluster // AIP Conf. Proc. 2017. Vol. 1915. – 040023.
    Full text>>

  671. Koroleva (Chekhomova) L.F. Abrasive Properties of Modified Oxides for Finish Polishing of Steel // AIP Conf. Proc. 2017. Vol. 1915. – 040027.
    Full text>>

  672. Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029.
    Full text>>

  673. Makarov A.V. G.V. Samoylova N.V. Gavrilov A.S. Mamayev Osinceva A.L. T.E. Kurennykh Savrai R.A. Effect of Preliminary Nanostructuring Frictional Treatment on the Efficiency of Nitriding of Metastable Austenitic Steel in Electron Beam Plasma // AIP Conf. Proc. 2017. Vol. 1915. – 030011.
    Full text>>

  674. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2017. Vol. 1915. – 030012.
    Full text>>

  675. Mironov V.I. O.A. Lukashuk D.A. Ogorelkov Estimation of Metallic Structure Durability for a Known Law of Stress Variation // AIP Conf. Proc. 2017. Vol. 1915. – 040039.
    Full text>>

  676. Prosviryakov E.Yu. Waves of Pressure in Viscous Incompressible Fluid // AIP Conf. Proc. 2017. Vol. 1915. – 020006.
    Full text>>

  677. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Layered Thermocapillary Convection of a Viscous Incompressible Fluid with Specified Stresses on the Bottom // AIP Conf. Proc. 2017. Vol. 1915. – 030019.
    Full text>>

  678. Prosviryakov E.Yu. Spevak L.F. Simulation of a Viscous Flow in Layered Composites in View of the Thermocapillary Effect // AIP Conf. Proc. 2017. Vol. 1915. – 040047.
    Full text>>

  679. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Michurov N.S. Senaeva (Pugacheva) E.I. Cheremicina E.R. Effect of the Content of SiC on the Structure and Properties of D16 alloy matrix composites // AIP Conf. Proc. 2017. Vol. 1915. – 030021.
    Full text>>

  680. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020.
    Full text>>

  681. Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050.
    Full text>>

  682. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049.
    Full text>>

  683. Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008.
    Full text>>

  684. Solovei V.D. Kolmogorov V.L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory // AIP Conf. Proc. 2017. Vol. 1915. – 040053.
    Full text>>

  685. Spevak L.F. Kazakov A.L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040054.
    Full text>>

  686. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Nonzero Boundary Conditions by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040055.
    Full text>>

  687. Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028.
    Full text>>

  688. Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062.
    Full text>>

  689. Zalazinskaya E.A. Zalazinskiy A.G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body // AIP Conf. Proc. 2017. Vol. 1915. – 040067.
    Full text>>

  690. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068.
    Full text>>

  691. Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069.
    Full text>>

  692. A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007.
    Full text>>

  693. Kruchkov D.I. Zalazinskiy A.G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials // AIP Conf. Proc. – 2017. Vol. 1915. – 040028.
    Full text>>

  694. Kuznetsov A.V. Kamantsev I.S. Zadvorkin S.M. N.A. Drukarenko Goruleva L.S. Veselova V.E. Evaluating the Damage of Steel 09G2S under Static and Cyclic Loading with Regard for the Level of Residual Stresses in the Metal // AIP Conf. Proc. – 2017. Vol. 1915. – 040030.
    Full text>>

  695. Ogorelkov D. A. Kamantsev I.S. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conf. Proc. – 2017. Vol. 1915. – 040010.
    Full text>>

  696. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022.
    Full text>>

  697. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026.
    Full text>>

  698. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Methods for Predicting Dynamic Loading of Friction Disks // AIP Conf. Proc. – 2017. Vol. 1915. – 040060.
    Full text>>

  699. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  700. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  701. Michurov N.S. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. The Structural State and Geometric Representation of a Laser-Welded Joint between a Corrosion-Resistant Steel and a Titanium Alloy with a Copper Insert . –https://doi.org/10.1063/1.5013818 // AIP Conference Proceedings. 2017. Vol. 1909. – 020137.

  702. Ogorelkov D. A. Kamantsev I.S. Kuznetsov A.V. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conference Proceedings. 2017. 1915. – 040010. 5 p.

  703. Pugacheva (Vandysheva) N.B. A.N. Cherepanov A.M. Orishich A.G. Malikov I.O. Drozdov V.I. Mali Senaeva (Pugacheva) E.I. Investigation of the Structure and Properties of a Composite Insert Applied at Laser Welding of Steel with Titanium // AIP Conference Proceedings. 2017. Vol. 1893. – 030107.
    Text in >>

  704. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Bykova (Gurchenko) T.M. Pugacheva E.I. Aluminium Matrix Composites with a SiC Filler . – https://doi.org/10.1063/1.5013861 // AIP Conference Proceedings. 2017. Vol. 1909. – 020180.

  705. Senaeva (Pugacheva) E.I. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Diagnostic of the Change in the Phase Composition and Stress-Strain State of the Laminated Materials and Their Components by Measuring the Magnetic Characteristics // AIP Conference Proceedings. 2017. Vol. 1909. – 020181.
    Full text>>

  706. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process . – DOI: 10.11648/j.ajmie.20170201.13 // American Journal of Mechanical and Industrial Engineering. 2017. Vol. 2. – No. 1. P. 17-23.

  707. Trishin V.N. Lookin N.A. Alexander Filimonoff Software Development Technology for Homogeneous Computing Environments // CEUR Workshop Proceedings (CEUR-WS.org). 2017. Vol. 1990. P. 60-71.

  708. Vandyshev A.B. Kulikov V.A. Analysis of Parameters and Modes for Producing High-Purity Hydrogen from Natural Gas in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 1-2. P. 49-55.

  709. Vandyshev A.B. Kulikov V.A. Energy and Resource Efficience in Industrial Systems for Production and Use of High-Purity Hydrogen // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 3-4. P. 166-170.

  710. M.A. Filippov M.A. Gervasiev S.M. Nikiforova Khudorozhkova Yu.V. G.N. Plotnikov S.Kh. Estemirova V.V. Controlling the Structure of Wear-Resistant Steels 150khnml and Kh12mfl by High-Temperature Quenching and Cold Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.1.043-054 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 43-54.

  711. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions for Natural Convection of Layered Flows of a Viscous Incompressible Fluid with Specified Tangential Forces and the Linear Distribution of Temperature on the Layer Boundaries [Electronic resource] // . – URL: http://dream-journal.org/issues/2017-4/2017-4_145.html // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 16-31.

  712. Gladkovsky S.V. Petrova (Kuteneva) S.V. Kamantsev I.S. R.M. Galeev S.N. Sergeev Dvoynikov D.A. Formation of the Mechanical Properties and Fracture Resistance Characteristics of Sandwich Composites Based on the 09G2S Steel and the EP678 High-Strength Steel of Various Dispersion [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.071-09 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 71-90.

  713. Gorkunov E.S. Magnetic Evaluation of the Structural and Phase Changes in Individual Layers of Multilayer Products [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.006-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 6-27.

  714. Kazakov A.L. Spevak L.F. Nefedova O.A. Simultenious Application of the Boundary Element Method and the Power Series Method for Solving a Two-Dimensional Problem of Heat Wave Motion [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.006-015 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 6-15.

  715. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80.

  716. Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.

  717. Shubina A.N. Babaylov N.A. Modeling of Radial Forging of a Hollow Ingot in Multiple Die Units [Electronic resource] . – URL: http://dream-journal.org/issues/2017-4/2017-4_147.html // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 6-15.

  718. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov A Computational Model of V95/SiCp (7075/ SiCp) Aluminum Matrix Composite Applied to Stress-Strain State Simulation under Tensile, Compressive and Shear Loading Conditions [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.016-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 16-27.

  719. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Estimating the Effect of Fillers on the Mechanical Properties of Epoxy Glue Coatings by Microindentation [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.103-111 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 103-111.

  720. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. V.М. Fomin A.А. Filippov Т.А. Brusentseva Studying Epoxy Resin Reinforced with Silica Dioxide Nanoparticles by Microindentation [Electronic resource] // . – DOI: 10.17804/2410-9908.2017.1.024-035 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 24-35.

  721. Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52.

  722. S.V. Anakhov Pugacheva (Vandysheva) N.B. Yu.A. Pykin A.V. Matushkin Bykova (Gurchenko) T.M. Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology // Inorganic Materials: Applied Research. 2017. Vol. 8. – No. 3. P. 400-405.

  723. Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped calcium carbonate-phosphate used for bone tissue technology // Integrative Clinical Medicine. – DOI: 10.15761/ICM.1000108. 2017. Vol. 1(2). P. 1-7.

  724. Yu.N. Loginov Babaylov N.A. D.N. Pervukhina The Action Result of the Concentrated Load on the Briquettes which Obtained from the Technogenous Material . – DOI 10.18502/kms.v2i2.953 // International Conference with Elements of School for Young Scientists on Recycling and Utilization of Technogenic Formations, KnE Materials Science. 2017. P. 97-101.

  725. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Smirnov A.S. Pugacheva (Vandysheva) N.B. Konovalov A.V. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature // International Journal of Material Forming. 2017. Vol. 10. – Iss. 5. P. 831–843.
    Full text>>

  726. Mushnikov A.N. Senaeva (Pugacheva) E.I. Mathematical Model of Magnetic Hysteresis under Triaxial Stress State // International Scientific Conference Proceedings “MATHMODEL”. 2017. Year 1. – Iss. 1. P. 55-58.

  727. Burmasheva N.V. Prosviryakov E.Yu. Exact solutions for layered large-scale convection induced by tangential stresses specified on the free boundary of a fluid layer – doi:10.1088/1757-899X/208/1/012010. // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012010.
    Full text>>

  728. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Stationary and Unsteady Layered Convection of a Viscous Incompressible Fluid with the Specified Velocities at the Bottom . – doi:10.1088/1757-899X/208/1/012035. // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012035.
    Full text>>

  729. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions . – doi:10.1088/1757-899X/208/1/012037 // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012037.
    Full text>>

  730. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Role of the Strengthening Phases in Abrasive Wear Resistance of Laser-Clad NiCrBSi Coatings // Journal of Friction and Wear. 2017. Vol. 38. – No. 4. P. 272-278.

  731. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.

  732. Mironov V.I. Ivanovich and Lukashuk Olga Anatolievna. Influence of Material Structural Inhomogeneity on Fracture Strength of Constructional Elements // Key Engineering Materials. 2017. Vol. 735. P. 89-94.

  733. Mironov V.I. Lukashuk O. Ogorelkov D. Fracture Strength for Metal Structure of a Crane . – DOI; 10.1051/matecconf/201712906008 // Matec Web of Conferences. 2017. Vol. 129. – 06008.

  734. Mironov V.I. Lukashuk O. Ogrelkov D. Method of Increasing Durability of Thin-Walled Structural Elements . – DOI; 10.1051/matecconf/201712901024 // Matec Web of Conferences. 2017. Vol. 129– 01034.

  735. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Improving the Quality of Transient Response During Automatic Control of the Turn of a Tracked Vehicle Based on the Implementation of Structured Input Shapers ). – DOI: 10.1051/matecconf/2017129, 06029 ICMTMTE 2017 // Matec Web of Conferences. 2017.

  736. S.D. Neulybin Yu.D. Shchitsyn V.S. Verkhorubov Yu.S. Korobov M.A. Filippov Savrai R.A. Soboleva N.N. Metallurgical Processes During Plasma Remelting of a Metallized Coating of the Fe-C-Cr-Ti-Al System // Metallurgist. 2017. Vol. 60. – Nos. 11–12. P. 1202-1206.

  737. Makarov A.V. N.V. Gavrilov G.V. Samoylova A.S. Mamaev Osinceva A.L. Savrai R.A. Effect of a Continuous and Gas-Cyclic Plasma Nitriding on the Quality of Nanostructured Austenitic Stainless Steel // Obrabotka Metallov – Metal Working and Material Science. 2017. Вып. 2. P. 55-66.

  738. E.V. Shalaeva N.I. Medvedeva A.E. Precul Smirnova (Yekzemplyarova) E.O. Smirnov S.V. N.I. Shchegolikhina I.O. Selyanin Ordering Effect on the Mechanical, Electronic and Magnetic Properties of the –Based Non-Canonical Approximant Phase: -Al50Cu33Fe17’-Al50Cu44Fe6 and -Al47.5Cu49.5Fe3 // Philosophical Magazine. 2017. Vol. 97. – No. 13. P. 1024-1046.

  739. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Makarov A.V. N.L. Pecherkina Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation // Physics of Metals and Metallography. 2017. Vol. 118. – No. 10. P. 1006-1014.

  740. Makarov A.V. Luchko S.N. Shabashov V.A. Volkova E.G. Zamatovskii A.E. Osinceva A.L. Litvinov A.V. Sagaradze V.V. Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure // Physics of Metals and Metallography. 2017. Vol. 118. – No. 1. P. 52-64.

  741. Makarov A.V. Skorynina P.A. A.S. Yurovskikh Osinceva A.L. Effect of the Conditions of the Nanostructuring Frictional Treatment Process on the Structural and Phase States and the Strengthening of Metastable Austenite Steel // Physics of Metals and Metallography. 2017. Vol. 118. – No. 12. P. 1225-1235.

  742. Berezin I.M. A.A. Petunin Kruchkov D.I. G.L. Kovacs Finite-Element Simulation of the Cold Stamping Process of Spherical Vessels // Pollack Periоdica. An International Journal for Engineering and Information Sciences.. 2017. Vol. 12. – No. 1. P. 81-92.

  743. Blagonravov A.A. A.A. Yurkevich Yurkevich A.V. Automatic control of a stepless mechanical transmission with an internal force function // Russian Engineering Research. 2017. Vol. 37. – No. 3. P. 185-188.

  744. Mikhailova Y.A. Vladimirov A.P. Bakharev A.A. Sergeev A.G. Novosyolova I.A. Yakin D.I. Studying of cell culture reaction to temperature change by dynamic speckle interferometry // Russian Journal of Biomechanics. 2017. Vol. 21. – No. 1. P. 64-73.

  745. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.

  746. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302.

  747. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Comparative Analysis of the Magnetic Characteristics of Plastically Deformed Metal in Different Zones of a Welded Pipe under Elastic Deformation // Russian Journal of Nondestructive Testing. 2017. Vol. 53. – No. 9. P. 636-643.

  748. Gorkunov E.S. Zadorin A.Yu. Goruleva L.S. Relationship between the Structure and Physical-Mechanical Properties of U8A Steel Subjected to Cold Plastic Deformation by Hydrostatic Extrusion // Russian Journal of Nondestructive Testing. 2017. Vol. 53. – No. 10. P. 700-706.

  749. L.A. Elshina R.V. Muradymov A.G. Kvashnichev Vichuzhanin D.I. N.G. Molchanova A.A. Pankratov Synthesis of New Metal-Matrix Al-Al2O3-Graphene Composite Materials // Russian Metallurgy (Metally). 2017. No. 8. P. 631-641.

  750. Yu.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Properties of the Welded Joints of Manganese Steel Made by Low-Frequency Pulsed Arc Welding // Russian Metallurgy (Metally). 2017. No. 4. P. 287-292.

  751. Butorin D.E. Burov V.G. Burov S.V. Tolochko B.I. Bataev I.A. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. V. 60. – Is. 5. P. 817-820.

  752. D.E. Butorin V.G. Burov Burov S.V. B.P. Tolochko I.A. Bataev. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. Vol. 60. – Iss. 5. P. 817-820.

  753. Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820.

  754. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Volkov A.A. Forecasting Resonant Parametric Vibrations of Transmission Friction Discs on the Basis of the Exact Determination of Their Modal Characteristics // Trans & Motauto. 2017. Year I. – Vol. 1. P. 7-10.

  755. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Volkov A.A. Reducing the Dynamic Load of Mechanical Water-Jet Drive of Amphibious Machines // Trans & Motauto. 2017. Year I. – Vol. 1. P. 4-6.

  756. Burmasheva N.V. Prosviryakov E.Yu. A large-scale layered stationary convection of an incompressible viscous fluid under the action of shear stresses at the upper boundary. Velocity field investigation // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 1. P. 180-196.

  757. Struzhanov V.V. On the method of orthogonal projections in the theory of elasticity // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 2. P. 308-325.

  758. Y.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Improving the reliability of metallic structures in service in the conditions with low climatic temperatures by efficient application of advanced methods of modification of the zone of the welded joint // Welding International. 2017. Vol. 31. – No. 8. P. 631-636.

  759. S.V. Anakhov Gladkovsky S.V. S.V. Lepikhin Dvoynikov D.A. Y.A. Pykin A.V. Matushkin. Mechanical and technological properties of welded joints produced after plasma cutting // Welding International. 2017. Vol. 31. – No. 6. P. 445-451.

  760. Koroleva (Chekhomova) L.F. Doped calcium carbonate-phosphate - a active biomaterial for osteogenesis with the transdermal ability // XX Mendeleev congress on general and applied chemistry 26-30 September, 2016, Ekaterinburg, Russia/ Abstract book in 5 volumes. 2016. Volume 4. 483 p.

  761. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical of plastic deformation and fracture of complexly aiioyed brass // International Journal of Damage Mechanics. 2016. vol. 25, № 2. P. 251 – 265.

  762. Dobrinskaya M.N. Larionov L.P. Koroleva (Chekhomova) L.F. ACUTE AND SUBCHRONIC TOXICITY INVESTIGATIONOF NEW DOPED NANOCRYSTALLIZED MATERIALS / Proceedings of IRF International Conference, 28th February 2016, Goa, India, ISBN: 978-93-85973-54-3. 2016. P. 32-35.

  763. Gorkunov E.S. Nosov P.A. Povolotskaya A.M. Zadvorkin S.M. Dimitrov R. Magnetic Flux Distribution in a Locally Magnetized Ferromagnetic Object. 2016. Vol. 52. – No. 12. P. 727-738.

  764. Shubina A.N. Beketov N.B. Оbabkov and N.A. Babailov Compaction Parameters for Briquetting of Molybdenum Powder (Web of Sciences, в печати). 2016.

  765. Smirnov S.V. Zamaraev L.M. Energy of Activation of the Vt5 and Vt1-0 Titanium Alloys under Short-Term Creep in Air and Argon [Electronic resource]. 2016. Iss. 6.

  766. Vladimirov A.P. Dynamic Speckle Interferometry of High-Cycle Material Fatigue: Theory and Some Experiments // AIP Conference Proceedings. 2016. Vol. 1740. – 040004. – DOI: 10 1063/1 4962663.

  767. Kazakov A.L. Spevak L.F. An analytical and numerical study of a nonlinear parabolic equation with degeneration for the cases of circular and spherical symmetry // Applied Mathematical Modelling. 2016. Vol. 40. Issue 2. P. 1333-1343.

  768. Bychkov I.V. Kazakov A.L. Lempert A.A. Bukharov D.S. Stolbov A.B. An Intelligent Manage-ment System for the Development of a Regional Transport Logistics Infrastructure // Automation and Remote Control. 2016. Vol. 77. – No. 2. P. 332-343.

  769. Koroleva (Chekhomova) L.F. Oscillating reactions in the synthesis of doped nanocrystalline calcium carbonate phosphates of transdermal ability // Biointerface Research in Applied Chemistry. 2016. Vol. 6, Issue 6. P. 1879-1882.

  770. Burov S.V. Khudorozhkova Yu.V. Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6.
    подробнее>>

  771. Gorkunov E.S. Prosviryakov E.Yu. Complex Stationary Convection with Third-Kind Boundary Conditions at the Boundaries of a Fluid Layer [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 2. P. 34-47.

  772. Koroleva (Chekhomova) L.F. Modified Nanoparticle Oxides for Final Polishing of Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 2. P. 48-73.

  773. Makarov A.V. Yakovleva S.P. Volkova E.G. Makharova S.N. Mordovskoy P.G. Special Features of the Formation of the Microstructure of the 09G2S Steel under Conditions of Cold and Warm Equal-Channel Angular Pressing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 39-47.

  774. Makarov A.V. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Lyzhin  V.V. Korshunov L.G. Improving the Thermal Stability and Heat Wear Resistance of Carburized Chromium-Nickel Steel by Nanostructuring Frictional Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 49-66.

  775. Mushnikov A.N. Mitropolskaya S.Yu. Effect of Mechanical Stresses on the Magnetic Characteristics of Pipeline Steels of Different Classes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 57-70.

  776. Pugacheva (Vandysheva) N.B. Zamaraev L.M. Igumnov А.S. Modeling the Thermo-Stressed State in the Nodes of the Honeycomb Structure with a Non-Uniform Distribution of Physical-Mechanical Properties [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4.. P. 71-88.

  777. Smirnov S.V. Myasnikova M.V. Igumnov A.S. Determination of the Local Shear Strength of a Layered Metal Composite Material with a Ductile Interlayer after Thermocycling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 46-56.

  778. Smirnov S.V. Perunov E.N. Konovalov D.A. Vyskrebentsev S.V. Using a Spatial Location Device for Express Diagnostics of Current Mechanical Properties of Metal Structures [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 89-94.

  779. Spevak L.F. Nefedova O.A. Parallelizing the Solution of the Nonlinear Heat Conduction Problem with the Application of the OpenCL Library [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6.

  780. Struzhanov V.V. Volkov S.S. Volkova T.A. Devolopment of Microstructure Damage in Structurally Heterogeneous Materials under Deformation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 3. P. 21-30.

  781. Vandyshev A.B. Analyzing the Parameters of Membrane Catalytic Systems for Extraction of Highly Pure Hydrogen from Hydrocarbon Feedstock with the Application of Mathematical Modeling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 6-45.

  782. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Michurov N.S. Smirnov S.V. Mechanical Properties and Fracture Behavior of the "copper M1 – Steel 09g2s" Bimetal Produced by Explosion Welding [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 28-38.

  783. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 39-48.

  784. Safarov I.M. Korznikov A.V. Galeyev R.M. Sergeev  S.N. Gladkovsky S.V. Pyshmintsev  I.Yu. An Anomaly of the Temperature Dependence of the Impact Strength of Low-Carbon Steel with an Ultrafine-Grain Structure // Doklady Physics. 2016. Vol. 61. – No. 1. P. 15-18.

  785. Aristov S.N. Prosviryakov E.Yu. Nonuniform Convective Couette Flow // Fluid Dynamics. 2016. Vol. 51. – No. 5. P. 581-587.

  786. Aristov S.N. Prosviryakov E.Yu. Unsteady Layered Vortical Fluid Flows // Fluid Dynamics. 2016. Vol. 51. – No. 2. P. 148-154.

  787. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical Simulation of Plastic Deformation and Fracture of Complexly Alloyed Brass // International Journal of Damage Mechanics. 2016. Vol. 25(2). P. 251-265.

  788. Smirnov A.S. Konovalov A.V. Belozerov G. A. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Peculiarities of the rheological behavior and structure formation of aluminum under deformation at near-solidus temperatures // International Journal of Minerals, Metallurgy and Materials // International Journal of Minerals, Metallurgy and Materials. 2016. Vol.23. – Iss. 5. P. 563-571.

  789. Yolshina L.A. Muradymov R.V. Korsun I.V. Yakovlev G.A. Smirnov S.V. Novel Aluminum-Graphene and Aluminum-Graphite Metallic Composite Materials: Synthesis and Properties // Journal of Alloys and Compounds. 2016. No. 663. P. 449-459.

  790. Vladimirov A.P. Novoselova I.A. Mikhailova Y.A. Bakharev A.A. Yakin D. I. The use of laser dynamical speckle interferometry in the study of cellular processes // Journal of Biomedical Photonics & Eng. 2016. Is. 2(1). P. 010302-1-010302-6. DOI: 10.18287/JBPE16.02.010302.

  791. Smirnov S.V. Konovalov D.A. Parshin S.V. Vyskrebentsev S.V. Degtyar’ V.G. Kalashnikov S.T. Taking into account the residual stresses during transverse calculation of the load frame to extend the service life above the warranty period // Journal of Machinery Manufacture and Reliability. 2016. Vol. 45. – Is. 3. P. 233-238.

  792. Savrai R.A. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Behavior of Gas Powder Laser Clad NiCrBSi Coatings under Contact Loading // Journal of Materials Engineering and Performance. 2016. Vol. 23. – Is. 3. P. 1068-1075.

  793. Smirnov A.S. Belozerov G. A. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Muizemnek O.Yu. Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis // Journal of Materials Engineering and Performance. 2016. Vol. 25(7). P. 2907-2913.

  794. Safarov I.M. Korznikov A.V. Galeyev R.M. Sergeev S.N. Gladkovsky S.V. Dvoynikov D.A. Litovchenko I.Y. The ultrafine-grained structure, texture and mechanical properties of low carbon steel obtained by various methods of plastic deformation // Letters on Materials. 2016. Vol. 6. – Is. 2. P. 126-131.

  795. Babaylov N.A. Polyansky L.I. Loginov Yu.N. Briquetting Metallurgical Lime Screenings and Parameters Making it Possible to Improve Process Efficiency // Metallurgist. 2016. Vol. 60. – Iss. 5-6. P. 576-580.

  796. Konovalov A.V. Smirnov A.S. Parshin V.S. Dronov A.I. Karamyshev A.P. Nekrasov I.I. Fedulov A.A. Serebryakov A.V. Study of the Resistance of Steels 18KhMFB and 18Kh3MFB to Hot Deformation // Metallurgist. 2016. Vol. 60. – Iss. 1-2. P. 234-237.

  797. Aristov S.N. Privalova V.V. Prosviryakov E.Yu. Stationary nonisothermal Couette flow. Quadratic heating of the upper boundary of the fluid layer // Nelineinaya Dinamika. 2016. Vol. 12. –Is. 2. P. 167-178.

  798. Vladimirov A.P. Speckle metrology of dynamic macro- and microprocesses in deformable media // Optical Engineering. 2016. Vol. 55. – No. 12. – 121727. P. 1-10.

  799. Ananyev M.V. Tropin E.S. Eremin V.A. Farlenkov A.S. Smirnov A.S. A.A. Kolchugin Porotnikova N.M. Khodimchuk A.V. Berenov A.V. Kurumchin E.K. Oxygen isotope exchange in La2NiO4±d // Physical Chemistry Chemical Physics. 2016. T. 18. – No. 13. P. 9102-9111.

  800. Kazantseva N.V. Demakov S.L. Yurovskikh A.S. Stepanova N.N. Vinogradova N.I. Davydov D.I. Lepikhin S.V. Phase diagram of the Co–Al–W system. structure and phase transformations near the Co3(Al, W) intermetallic composition range // Physics of Metals and Metallography. 2016. Vol. 117. – No. 7. P. 701-709.

  801. Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Investigation of the Structure and Properties of the Material of Various Zones of the Welded Joint of the Austenitic Nitrogen-Containing Steel upon Elastoplastic Deformation // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1153-1163.

  802. Pugacheva (Vandysheva) N.B. Michurov N.S. Bykova (Gurchenko) T.M. Structure and Properties of the Al/SiC Composite Material // Physics of Metals and Metallography. 2016. Vol. 117. – No. 6. P. 634-640.

  803. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. Bykova (Gurchenko) T.M. Structure and Thermophysical Properties of Aluminum-Matrix Composites // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1145-1152.

  804. Pugacheva (Vandysheva) N.B. Myasnikova M.V. Michurov N.S. Simulation of the Elastic Deformation of Laser-Welded Joints of an Austenitic Corrosion-Resistant Steel and a Titanium Alloy with an Intermediate Copper Insert // Physics of Metals and Metallography. 2016. Vol. 117. – No. 2. P. 216-224.

  805. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Kalashnikov S.T. Ivanov A.V. Smirnov S.V. Frolova N.Yu. Studying Recovery Processes in a Strain-Hardened Al-Mg-Mn-Fe-Si Alloy // Physics of Metals and Metallography. 2016. Vol. 117. – No. 9. P. 920-926.

  806. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A numerical Study of Sress-Strain Evolution in Structurally Inhomogeneous Materials Subjected to Uniaxial Loading // PNRPU Mechanics Bulletin. 2016. No. 3. P. 175-187.

  807. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Experimental Determination of Kinematic and Power Parameters at the Tracked Vehicle Turning // Procedia Engineering. 2016. Vol. 136. P. 1368-1377.

  808. Bataev A.A. Burov S.V. Bataev I.A. Burov V.G. Stability Analysis of the Copper Surface Layer Structure in the Process of Sliding Friction by the Method of Diffraction Analysis Using Synchrotron Radiation // Russian Physics Journal. 2016. Vol. 59. – Iss. 2. P. 314-316.

  809. Mironov V.I. Lukashuk O.A. Calculation of Metalwork Life with Allowance for Cyclic Degradation of Material in Operation // Solid State Phenomena. 2016. Vol. 870. P. 725-729.

  810. Vladimirov A.P. Kamantsev I.S. Veselova V.E. Gorkunov E.S. Gladkovsky S.V. Use of Dynamic Speckle Interferometry for Contactless Diagnostics of Fatigue Crack Initiation and Determining Its Growth Rate // Technical Physics. 2016. Vol. 61. – No. 4. P. 563–568.

  811. Aristov S.N. Prosviryakov E.Yu. A New Class of Exact Solutions for Three-Dimensional Thermal Diffusion Equations // Theoretical Foundations of Chemical Engineering. 2016. Vol. 50. – No. 3. P. 286-293.

  812. Aristov S.N. Prosviryakov E.Yu. Spevak L.F. Unsteady-State Benard-Marangoni Convection in Layered Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2016. Vol. 50. – No. 2. P. 132-141.

  813. Saraev Yu.N. Gladkovsky S.V. Veselova V.E. Golikov N.I. Improving the Service Properties of Metal Structures Working in the Conditions of Low Climatic Temperatures by Methods of Adaptive Pulsed-Arc Welding // Welding International. 2016. Vol. 30. – No. 11. P. 884-890.

  814. Vlasova S.S. Prosviryakov E.Yu. Two-dimensional convection of an incompressible viscous fluid with the heat exchange on the free border // Вестник Самарского государственного технического университета. Серия “Физико-математические науки”. 2016. Т. 20. – № 3. P. 35-47.

  815. Gorkunov E.S. Zadvorkin S.M. Senaeva (Pugacheva) E.I. Bakunova A.A. Quality Control of Heat Treatment of Oil and Gas Pipes Using Magnetic Structuroscopy // Inorganic Materials. 2016. Vol. 52. – No. 15. P. 1509-1514.

  816. Mal'tseva L.A. Levina A.V. Loginov Yu.N. Gladkovsky S.V. Changes in the Structure and Properties Under Deformation of Austenitic-Ferritic Steel at Room and Negative Temperatures // Metal Science and Heat Treatment. 2016. Vol. 57. – Iss. 11-12. P. 645-651.

  817. Gladkovsky S.V. Ishina E.A. Kuteneva S.V. Raising the Structural Strength of Systematically Alloyed Fe - Cr - Ni - Mo-Base Maraging Steels // Metal Science and Heat Treatment. 2016. Vol. 57. – Iss. 11-12. P. 663-668.

  818. Gorkunov E.S. Gladkovsky S.V. Brittle Fracture Resistance of Chinga Ataxite at Different Mechanical Loading Conditions // Meteoritics & Planetary Science. 2016. Vol. 51. – Special Issue (SI). – A297.

  819. Berezin I.M. Polyakov A.P. Mathematical Modeling of Drawing Rods Made of Titanium Sponge Allowing for Pore Formation // Russian Journal of Non-Ferrous Metals. 2016. Vol. 57. – No. 6. P. 555-564.

  820. Makarov A.V. Gorkunov E.S. Skorynina P.A. Kogan L.Kh. Yurovskikh A.S. Osinceva A.L. Eddy-Current Control of the Phase Composition and Hardness of Metastable Austenitic Steel after Different Modes of Nanostructuring Attrition Treatment // Russian Journal of Nondestructive Testing. 2016. V. 52. – No. 11. P. 627-637.

  821. Shubina A.N. Beketov A.R. Оbabkov N.V. Iskhakov R.F. THE PRESSING PARAMETERS DEPENDENCE FOR THE COMPACTION OF REFRACTORY METALS POWDERS // Сборник материалов X международной конференции «Механика, ресурс и диагностика материалов и конструкций» (Екатеринбург, 16–20 мая 2016 г.). Екатеринбург: ИМАШ УрО РАН. 2016. 51 p.

  822. Konovalov A.V. Smirnov A.S. Belozerov G. A. Muizemnek O.Yu. Simulation of the Rheological Behavior of the 01570C Alloy under High-Temperature Deformation // AIP Conf. Proc. 2016. 1785, 040028.
    Text in >>

  823. Smirnov A.S. Belozerov G. A. Konovalov A.V. Shveikin V.P. Muizemnek O.Yu. Rheological Behavior and the Formation of the Microstructure of a Composite Based on an Al-Zn-Mg-Cu Alloy with a 10% SiC Content // AIP Conf. Proc. 2016. 1785, 040068.
    Full text>>

  824. Saraev Yu.N. Bezborodov V.P. Gladkovsky S.V. Golikov N.I. The ways of reliability enhancement of welded metal structures for critical applications in the conditions of low climatic temperatures // AIP Conference Proceedings. 2016. Vol. 1783. – 020195. – DOI: 10.1063/1.4966489.

  825. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Michurov N.S. Senaeva (Pugacheva) E.I. INVESTIGATION OF LOCAL MECHANICAL PROPERTIES OF MATERIALS IN WELDED JOINTS OF THE VT1-0 TITANIUM ALLOY AND THE 12CR18NI10TI AUSTENITIC CORROSION RESISTANT STEEL WITH AN INTERMEDIATE COPPER INSERT WITH THE USE OF A NANOMECHANICAL TESTING SYSTEM. DOI: 10.1063/1.4967107 // AIP Conference Proceedings. 2016. Vol. 1785. С. 040050.

  826. Smirnov S.V. Veretennikova (Golubkova) I.A. Brusentseva T.A. Filippov A.A. Fomin V.M. STUDYING A HETEROGENEOUS MATERIAL BASED ON EPOXY OLIGOMER FILLED WITH SILICA BY MICROINDENTATION.
    DOI: 10.1063/1.4967126 // AIP Conference Proceedings. 2016. Vol. 1785. 040069.

  827. Karamyshev A.P. Nekrasov I.I. Nesterenko A.V. V.S. Parshin Smirnov S.V. Fedulov A.A. Shveikin V.P. Studying the Damage of Ingots under Plastic Deformation on a Lever-Type Radial Forging Machine // AIP Conf. Proc. 2016. Vol. 1785. – 030010. –http://dx.doi.org/10.1063/1.4967031.

  828. Polianski L.I. Babaylov N.A. Loginov Yu.N. Pervukhina D.N. Industrial Recycling of Technogenic Wastes and Mineral Ore Processing // AIP Conf. Proc. 2016. Vol. 1785. – 040046. – http://dx.doi.org/10.1063/1.4967103.

  829. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Michurov N.S. Finite-Element Simulation of Multiaxial Compaction of Sponge Titanium Powder // AIP Conf. Proc. 2016. Vol. 1785. – 040008. – http://dx.doi.org/10.1063/1.4967065.

  830. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.

  831. Gorkunov E.S. Zadvorkin S.M. Kuzevanov V.F. Dimitrov R. Magnetic Technique for Detecting Discontinuities in Products Made of Non-Ferromagnetic Materials // AIP Conf. Proc. 2016. Vol. 1785. – 040018. – http://dx.doi.org/10.1063/1.4967075.

  832. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Control of the Quality of Forged Piece in Shaft Press-Forging CAPP // AIP Conf. Proc. 2016. Vol. 1785. – 040065. – http://dx.doi.org/10.1063/1.4967122.

  833. Khalevitskiy Yu.V. Burmasheva N.V. Konovalov A.S. Partin. Comparative Study of Krylov Subspace Method Implementations for a GPU Cluster in Elastoplastic Problems // AIP Conf. Proc. 2016. Vol. 1785. – 040024. – http://dx.doi.org/10.1063/1.4967081.

  834. Khudorozhkova Yu.V. Kamantsev I.S. Burov S.V. The Features of Phase Transformations and Structural Changes in Steels with Stable and Metastable Austenite under Fatigue Loading // AIP Conf. Proc. 2016. Vol. 1785. – 040025. – http://dx.doi.org/10.1063/1.4967082.

  835. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Effect of the Al/SiC Composite Structure on the Pattern of Corrosion Damage // AIP Conf. Proc. 2016. Vol. 1785. – 040049. –http://dx.doi.org/10.1063/1.4967106.

  836. Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.

  837. Shveikin V.P. Smirnov S.V. Nesterenko A.V. Thermomechanical Hardening of Rolled Stock in a Pipe-Rolling Mill Line // AIP Conf. Proc. 2016. Vol. 1785. – 040063. –http://dx.doi.org/10.1063/1.4967120.

  838. Smirnov S.V. Smirnova (Yekzemplyarova) E.O. Pugacheva (Vandysheva) N.B. Studying the Zones of a Welded Joint of an Al-Mg-Li-Zr Aluminum Alloy By Kinetic Indentation // AIP Conf. Proc. 2016. Vol. 1785. – 040064. – http://dx.doi.org/10.1063/1.4967121.

  839. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Igumnov A.S. A Fracture Locus for Commercially Pure Aluminum at 300 °С // AIP Conf. Proc. 2016. Vol. 1785. – 040067. – http://dx.doi.org/10.1063/1.4967124.

  840. Soboleva N.N. Makarov A.V. Malyigina I.Yu. Savrai R.A. Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2016. Vol. 1785. – 030028. – http://dx.doi.org/10.1063/1.4967049.

  841. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Degeneration by the Boundary Element Method with the Application of the Dual Reciprocity Method // AIP Conf. Proc. 2016. Vol. 1785. – 040077. – http://dx.doi.org/10.1063/1.4967134.

  842. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Prediction of the Parametrical Resonance Oscillations of Transmission Friction Discs on the Basis of High Precision Determination of Their Modal Characteristics // AIP Conf. Proc. 2016. Vol. 1785. – 040086. – http://dx.doi.org/10.1063/1.4967143.

  843. Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Patterns of the Change in the Mechanical Properties of a Bimetallic Welded Joint under Plastic Deformation // AIP Conf. Proc. 2016. Vol. 1785. – 040089. – http://dx.doi.org/10.1063/1.4967146.

  844. Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped nanocrystalline calcium carbonate-phosphate – a biomaterial for bone repair and strengthening by drug delivery . DOI: 10.17804/2410-9908.2015.5.147-157 // Diagnostics, Resource and Mechanics of materials and structure. 2015. Iss/ 5. P. 147-152.
    Full text>>

  845. Soboleva N.N. Makarov A.V. Malyigina I.Yu. Osinceva A.L. The formation of NiCrBSi coatings with increased wear resistance by gas powder laser cladding // Abstracts of International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 21-26 September,. Tomsk: Publishing House of IAO SB RAS, 2015. 336 p.

  846. Saraev Y.N. Bezborodov V.P. Senaeva (Pugacheva) E.I. The Influence of Pulsed Heat and Power Supply on the Structure and Properties of Welded Joint Metals and Surfaced Coatings // Applied Mechanics and Materials. 2015. Vol. 788. P. 259-266.

  847. Bychkov I.V. Kazakov A.L. Lempert A.A. Bukharov D.S. Stolbov A.B. An Intelligent Management System for the Development of a Regional Transport Logistics Infrastructure // Automation and Remote Control. 2015. Vol. 72. No. 8.

  848. Kazakov A.L. Lempert A.A. Bukharov D.S. Mathematical Model and Program System for Solving a Problem of Logistic Objects Placement // Automation and Remote Control. 2015. Vol. 72. No. 8.

  849. Yolshina L.A. Muradymov R.V. Vovkotrub E.G. Smirnov S.V. Diamond Synthesis in Aluminum Matrix in Molten Alkali-Halide at Ambient Pressure // Diamond and Related Materials. 2015. Vol. 55. P. 1-11.

  850. Lookin N.A. Rubin L.S. Use of Nonlinear Functional Analog to Digital Conversion in Precision Measurements of Small Electrical Quantities // Gyroscopy and Navigation. 2015. Vol. 6. No. 2. P. 149–155.

  851. Kazakov A.L. Lempert A.A. On Mathematical Models for Optimization Problem of Logistics Infrastructure // International Journal of Artificial Intelligence. 2015. No. 13 (1). P. 200-210.

  852. Solovei V.D. Prigogine theorem for the process of rolling of a viscoplastic strip // Journal of Engineering Physics and Thermophysics. 2015. Vol. 88. № 3. P. 561-567.

  853. Pugacheva (Vandysheva) N.B. Trushina E.B. Antenorova N.P. Pugacheva E.I. Comparative Studies of the Character of Destruction in 38Kh2N2MA and 12Kh2N4A Steel Gearwheel Teeth Operated under Extreme Conditions // Journal of Friction and Wear. 2015. Vol. 36. No. 3. P. 229-236.

  854. Emelyanov I.G. Investigation into the Contact Interaction between Shell and Base with Notches // Journal of Machinery Manufacture and Reliability. 2015. Vol. 44. No. 3. P. 263-270.

  855. Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Behavior of Magnetic Characteristics in Promising Nitrogen-Containing Steels upon Elastoplastic Deformation // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 838-849.

  856. Gorkunov E.S. Yurkevich A.V. Zadvorkin S.M. Mushnikov A.N. Yakushenko E.I. Effect of Elastic Deformation on Magnetic Characteristics of Chromium-Nickel Steels // Physics of Metals and Metallography. 2015. Vol. 116. No. 2. P. 147-155.

  857. Pugacheva (Vandysheva) N.B. Antenorova N.P. Pugacheva E.I. Study of the Structure and Properties of Laser-Welded Joints of the Al-Mg-Li Alloy // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 1259-1269.

  858. Pestov A.V. Kuznetsov V.A. Mekhaev A.V. Gorbunova T.I. Saloutin V.I. Smirnov S.V. Vichuzhanin D.I. Matafonov P.P. Designing New Adhesive Materials Based on Epoxy Oligomers Filled with Organic Compounds // Polymer Science. Series D. Glues and Sealing Materials. 2015. Vol. 8. No. 2. P. 149-152.

  859. Baharev A.A. Vladimirov A.P. Malygin A.S. Mihailova Y.A. Novoselova I.A. Yakin D.I. Druzhinin A.V. Dynamic speckle-interferometer for intracellular processes analyses at high optical magnification // Proc. of SPIE. 2015. Vol. 9529. P. 95291G-1 – 95291G-9.

  860. Vladimirov A.P. Dynamic speckle interferometry of intracellular processes: theory and features of application // Proc. of SPIE. 2015. Vol. 9529. P. 95290Y-1 – 95290Y-9.

  861. Vladimirov A.P. Baharev A.A. Malygin A.S. Mikhailova J.A. Novoselova I.A. Yakin D.I. Application of speckle dynamics for studies of cell metabolism // Proc. of SPIE. 2015. Vol. 9529. P. 95291F-1 – 95291F-10.

  862. Vladimirov A.P. Kamantsev I.S. Veselova V.E. Gladkovsky S.V. Using speckle images correlation for real-time inspection of fatigue crack initiation and propagation // Proc. of SPIE. 2015. Vol. 9525. P. 952525-1 - 952525-6.

  863. Vladimirov A.P. Dynamic Speckle-Interferometry of Microscopic Processes in Thin Biological Objects // Radiophysics and Quantum Electronics. 2015. Vol. 57. No. 8-9. P. 564-576.

  864. Vladimirov A.P. Malygin A.S. Mikhailova Yu.A. et. al. Using Speckle Dynamics for Comparison of the Metabolic Activity of Different Cell Cultures // Radiophysics and Quantum Electronics. 2015. Vol. 57. No. 8-9. P. 584-588.

  865. V.S. Parshin Parshin S.V. Stress State of Metal in Multistage Plastic Deformation // Russian Engineering Research. 2015. Vol. 35. No. 1. P. 1–2.

  866. Korznikov A.V. Dmitriev S.V. Kornikova G.F. Gladkovsky S.V. Potekaev A.I. The Effect of the Heat Treatment Regime on the Structure and Physical-Mechanical Properties of a 23X15KT Hard Magnetic Alloy // Russian Physics Journal. 2015. Vol. 57. Is. 10. P. 1308-1312.

  867. Cherepanov A.N. Orishich A.M. Pugacheva (Vandysheva) N.B. Shapeev V.P. Investigation of the Structure and Properties of Titanium-Stainless Steel Permanent Joints Obtained by Laser Welding with the Use of Intermediate Inserts and Nanopowders // Thermophysics and Aeromechanics. 2015. Vol. 22. Is. 2. P. 135-142.

  868. Vandyshev A.B. Kulikov V.A. Analysis of parameters of high-purity hydrogen production from methane in a laboratory-scale membrane reformer with an ultrathin palladium membrane // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 3-4. P. 250-256. DOI 10.1007/s10556-015-0032-1.

  869. Vandyshev A.B. Kulikov V.A. Hydrogen Permeability of Palladium Membranes Made of Alloy V-1 in Laboratory Investigations And Membrane Devices // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 5-6. P. 396-401. DOI 10.1007/s10556-015-0058-4.

  870. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. Formation of wear-resistant chromium-nickel coating with extra high thermal stability by combined laser-and-heat treatment // Metal Science and Heat Treatment. 2015. V. 57. No. 3-4. P. 161-168.

  871. Makarov A.V. Savrai R.A. Gorkunov E.S. Yurovkikh A.S. Malyigina I.Yu. Davydova (Pozdejeva) N.A. Structure, Mechanical Characteristics, and Deformation and Fracture Features of Quenched Structural Steel under Static and Cyclic Loading after Combined Strain-Heat Nanostructuring Treatment // Physical Mesomechanics. 2015. Vol. 18. No. 1. P. 43-57.

  872. Nesterenko A.V. Novozhonov V.I. Zalazinskiy A.G. Skripov A.V. Influence of Temperature on Compactibility of Briquettes of Titanium Sponge Alloyed with Hydrogen // Russian Journal of Non-Ferrous Metals. 2015. Vol. 56. Is. 3. P. 287-292.

  873. Brusentseva Т.А. Filippov A.А. Fomin V.М. Smirnov S.V. Veretennikova (Golubkova) I.A. MODIFICATION OF EPOXY RESIN WITH SILICA NANOPARTICLES AND PROCESS ENGINEERING OF COMPOSITES BASED ON THEM. DOI: 10.1007/s11029-015-9523-6 // Mechanics of Composite Materials. 2015. Т. 51. № 4. P. 531-538.

  874. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.

  875. Gladkovsky S.V. Potapov A.I. Lepikhin S.V. Studying the Deformation Resistance of Ep679 Maraging Steel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 16-26. URL: http://dream-journal.org/issues/2015-4/2015-4_32.html.

  876. Gorkunov E.S. Magnetic structural-phase analysis as applied to diagnosing and evaluating the lifetime of products and structural components. Part 1 // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 6-40.

  877. Gorkunov E.S. Magnetic Structural-Phase Analysis. Part I [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 6-50. URL: http://dream-journal.org/issues/2015-3/2015-3_34.html.

  878. Gorkunov E.S. Savrai R.A. Makarov A.V. Zadvorkin S.M. Magnetic techniques for estimating elastic and plastic strains in steels under cyclic loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 6-15.

  879. Koroleva (Chekhomova) L.F. Nanoparticulate zirconia-modified solid solutions of aluminum-iron oxides for polishing titanium metal // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Issue 1. P. 90-102.

  880. Kruchkov D.I. Zalazinskiy A.G. Berezin I.M. Romanova O.V. Modelling of compaction of titanium composite powders // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 48-60.

  881. Makarov A.V. Mitropolskaya S.Yu. Maltseva L.A. Levina A.V. Progress in ultra-deformable stainless steels for medical tool application [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 44-56. URL: http://dream-journal.org/DREAM_Issue_2_2015_Maltseva_L.A._et_al._44_56.pdf.

  882. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Tribological Performances of a NiCrBSi – TiC Laser-Clad Composite Coating under Abrasion and Sliding Friction [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 83-97. URL: http://dream-journal.org/issues/2015-3/2015-3_33.html.

  883. Nesterenko A.V. Zalazinskiy A.G. Novozhonov V.I. Effect of Deformation Processing on the Properties and Structure of Titanium Obtained by Plastic Deformation of Hydrogen-Alloyed Titanium Sponge [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 98-108. URL: http://dream-journal.org/issues/2015-3/2015-3_9.html.

  884. Potapov A.I. Gladkovsky S.V. Kokovikhin E.A. Salikhyanov D.R. Dvoynikov D.A. Determining the plastic strain resistance of metallic materials on an automated plastometric complex [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 24-43.

  885. Pugacheva (Vandysheva) N.B. Current Trends in the Development of Heat-Resistant Coatings Based on Iron, Nickel and Cobalt Aluminides [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 51-82. URL: http://dream-journal.org/issues/2015-3/2015-3_30.html.

  886. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Smirnov S.V. Kalashnikov S.T. Chekushkin V.S. Antenorova N.P. Pankratov A.A. Studying the Changes in the Structure and Properties of a Magnesium Alloy after Operation and Long Annealing at Temperatures of 50 and 70 °С [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 27-39. URL: http://dream-journal.org/issues/2015-4/2015-4_38.html.

  887. Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. Modelling and simulation of strain resistance of alloys taking into account barrier effects // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 61-72.

  888. Smirnov S.V. Veretennikova (Golubkova) I.A. Comparative Evaluation of Metal Damage on the Free Lateral Surface of Single-Layer and Three-Layer Strips under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 6-15. URL: http://dream-journal.org/issues/2015-4/2015-4_39.html.

  889. Solovei V.D. Possible Velocity Disturbances in the Lag Zone and on the Free Boundary in a Viscoplastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 49-59. URL: http://dream-journal.org/issues/2015-4/2015-4_35.html.

  890. Vandyshev A.B. Kulikov V.A. Calculating the main parameters of a Membrane Reformer with a Production Rate of 40 m3/h Designed for Producing Highly Pure Hydrogen from Natural Gas [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 109-121. URL: http://dream-journal.org/issues/2015-3/2015-3_31.html.

  891. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. Stress state influence on plasticity limit of grade Х80 steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 73-89.

  892. Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. Vol. 49, No 9-10. P. 660-667.

  893. Burov S.V. Khudorozhkova Yu.V. The influence of cooling rate on the morphology of cementite in hypereutectoid steel // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 153 p.

  894. Khudorozhkova Yu.V. Burov S.V. Investigation into the structure and properties of wear-resistant coatings based on chromium metastable austenite // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 154 p.

  895. Derevyagina L.S. Lemeshev N.M. Korznikov A.V. Gladkovsky S.V. Effect of Severe Plastic Deformation on the Structure, Mechanical Properties and Fracture Behavior of Low-Carbon Steel 12GBA // AIP Conference Proceedings. 2014. Vol. 1623. P. 103-106.

  896. Gorkunov E.S. Taratorkin A.I. Makarov A.V. Magnetic techniques for estimating elastic and plastic strains in steels under cycliс loading // Chapter in book Advanced Dynamics and Model Based Control of Structures and Machines / Eds. A.K. Belyaev, Hans Irschik, Michael Krommer: – , 2014, XVIII, 316 p. Springer, 2014. Chapter 15. P. 137-144.

  897. Koroleva (Chekhomova) L.F. Cherednichenko N.V. Dobrinskay M.N. Doped Nanocrystalline Calcium Carbonate-Phosphate-Biomaterial with Transdermal Activity for Osteogenesis//Nanotechnology Vol. 11: Biomaterials / Naveen Kumar Navani and Shishir Sinha. USA: Studium Press LLC, 2014. Part. 14. P. 311-327.

  898. Emelyanov I.G. Kuznetsov A.V. The Stressed State of Shell Structures under Local Loads // Journal of Machinery and Reliability. 2014. Vol. 43. No 1. P. 42-47.

  899. Emelyanov I.G. Kuznetsov A.V. The stressed state of shell structures under local loads // Journal of Machinery Manufacture and Reliability. 2014. V. 43. – No. 1. P. 42-47.

  900. Koroleva (Chekhomova) L.F. Nanocrystalline Doped Calcium Carbonate-Phosphates as a Biomaterial for Osteogenesis // Research Journal of Pharmaceutical, Biological and Chemical Sciences. 2014. 5(6). P. P. 704-710.

  901. Vandyshev A.B. Kulikov V.A. Comparison of calculated and experimental flow data for a membrane reformer for special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 9-10. P. 660-667.

  902. Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 11-12. P. 719-726.

  903. Bitkov V.V. Fetures od Drawing Axially Symmetric Composite Wares with a Filament Core Made of Nonferrous Metals and Alloys // Russian Journal of Non-Ferrous Metals. 2014. Vol. 55 № 2. P. 148-153.

  904. Makarov A.V. Korshunov L.G. Taratorkin A.I. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Chernenko N.L. Influence of Prolonged Heating on Thermal Softening, Chemical Composition, and Evolution of the Nanocrystalline Structure Formed in Quenched High-Carbon Steel upon Friction Treatment // The Physics of Metals and Metallography. 2014. V. 115. No. 3. P. 303-314.

  905. Vladimirov A.P. Time - Average Dynamic Speckle Interferometry // AIP Conf. Proc. 1600, 237. 2014. – http://dx.doi.org/10.1063/1.4879588.

  906. Vladimirov A.P. Bakharev A.A. Malygin A.S. Mikhaylova J.A. Borodin E.M. Poryvayeva N.P. Glinskikh A.P. Application of dynamic speckle-interferometry in the study of the metabolism of cultivated cells with viruses // AIP Conf. Proc. 1600, 357. 2014. – http://dx.doi.org/10.1063/1.4879603.

  907. Klimova O.V. Formal Transition from Algorithm to Model for Digital Signal Processing Operations // Conference Proceedings of the 24th International Crimea Conference “Microwave & Telecommunication Technology”, Sevastopol, September 7-13. 2014. Article number 6959463. P. 445-446. IEEE Catalog Number: CFP14788.

  908. Klimova O.V. Methodology of Data Decomposition and Formal Synthesis of Composition Forms for Representation of Digital Signal Processing Basic Operations // Conference Proceedings of the 24th International Crimea Conference “Microwave & Telecommunication Technology”, Sevastopol, September 7-13. 2014. Article number 6959471. P. 429-430. IEEE Catalog Number: CFP14788.

  909. Koroleva (Chekhomova) L.F. Final Polishing of Metals to Obtain Nanoroughened Surface with Nanoparticulate Complex Oxides of Aluminum and Iron/Recent Advances in Abrasives Research / Prof. Dirk Bahre. USA: Nova Science Publishers, 2013. Part. 6. P. 173-211.

  910. Kazakov A.L. Spevak L.F. Numerical and analytical studies of a nonlinear parabolic equation with boundary conditions of a special form // Applied Mathematical Modelling. 2013. Vol. 37. – Issues 10-11. P. 6918-6928.

  911. Kazakov A.L. Lempert A.A. Bukharov D.S. On Segmenting Logistical Zones for Servicing Continuously Developed Consumers // Automation and Remote Control. 2013. Vol. 74.– №6. P. 968-977.

  912. Smirnov S.V. The Healing of Damage after the Plastic Deformation of Metals // Frattura ed Integrita Strutturale. Special Issue: Russian Fracture Mechanics School. 2013. – 24. P. 7-12. – DOI: 10.3221/IGF-ESIS.24.02.

  913. Dunyushkina L.A. Smirnov S.V. Plaksin S.V. Kuimov V.M. Gorelov V.P. The Across-Plane Conductivity and Microstructure of SrZr0.95Y0.05O3-d Thin Films // Ionics. 2013. Vol. 19. – №12. – DOI 10.1007/s11581-013-0910-5. P. 1715-1722.

  914. Emelyanov I.G. Mironov V.I. Contact problem for a shell considering the transverse load // Journal of Machinery Manufacture and Reliability. 2013. V. 42. Is. 1. P. 36-40.

  915. Gorkunov E.S. Correlation between the Magnetic Behaviour and Damage of Metal Materials under Plastic Deformations // Key Engineering Materials. 2013. Vol. 528. P. 71-78.

  916. Smirnov S.V. Accumulation and healing of damage during plastic metal forming: simulation and experiment // Key Engineering Materials. 2013. V. 528. P. 61-69.

  917. Taratorkin A. Derzhanskiy V.B. Taratorkin I.A. Decrease in dynamic loading of transmission elements of the vehicle // Lecture Notes in Electrical Engineering. 2013. – 198 LNEE. – Vol. 10. P. 495-504.

  918. Khudorozhkova Yu.V. Burov S.V. Korobov Yu.S. Devyatyarov M.S. Effect of Nickel on Structure of Cu–Cr–Zr Bronze after Annealing at 800 and 900 °С // Modern materials and technologies. 2013. №1. P. 117-120.

  919. Ivanov M. Smirnov S.V. Pavlyishko S.V. Ivanov D. Brenner D. Shenderova O. Tribological Properties of Motor Oil with Nanodiamond Additive Tested for Steel Friction Surfaces with Different Hardnesses // MRS Online Proceedings Library. 2013. Vol. 6038. P. 1-6.

  920. Shalaeva E.V. Chernyshev Yu.V. Smirnova (Yekzemplyarova) E.O. Smirnov S.V. Lamellar Structure and Nanomechanical Properties of Quasircristalline Al-Cu-Fe Alloys // Physics of the Solid State. 2013. Vol. 55. - №11. P. 2095-2104.

  921. Derzhanskiy V.B. Taratorkin I.A. Stabilization of Linear Motion of the Tracked Vehicle // SAE Technical Paper. 2013. DOI: 10.4271/2013-01-2363.

  922. Popova O. P. Jenniskens Emel’yanenko V. Kartashova A. Biryukov E. Khaibrakhmanov S. Shuvalov V. Rybnov Y. Gladkovsky S.V. et al. Chelyabinsk airburst, damage assessment, meteorite recovery, and characterization // Science. 2013. Vol. 342. P. 1069-1073.

  923. Filippov M.A. Gervas’ev M.A. Khudorozhkova Yu.V. Legchilo V.V. Influence of the quenching temperature on the phase composition, structure and wear resistance of 150XHM steel // Steel in Transaction. 2013. Vol. 43. Issue 11. P. 720-723.

  924. Kazakov A.L. Lempert A.A. Existence and uniqueness of the solution of the boundary-value problem for a parabolic equation of unsteady filtration // Journal of Applied Mechanics and Technical Physics. 2013. Vol. 54. – № 2. P. 251-258.

  925. Mal'tseva L.A. Mitropolskaya S.Yu. Effect of Tensile Deformation on Austenitic Cr - Ni-Steel Structure and Magnetic Properties // Metal Science and Heat Treatment. 2013. Vol. 55. – № 5-6. P. 328-334.

  926. Gladkovsky S.V. Trunina T.A. Kokovikhin E.A. et al. Structural steel-aluminum sandwich composites based on low-carbon steel 006/IF // Metal Science and Heat Treatment. 2013. Vol. 55. – № 1-2. P. 3-7.

  927. Mitropolskaya S.Yu. Certification of hardened surface layers by magnetic and electromagnetic methods // Metal Science and Heat Treatment. 2013. Volume 55, Issue 3. P. 157-162.

  928. Grokhovsky V.I. Gladkovsky S.V. Ryzhkov M.A. et al. Mechanical and Thermal Properties of the Chelybinsk Meteorite // Meteoritics & Planetary Science. 2013. Vol. 48. – Special Issue: SI. – Supplement: 1. P. A147-A147.

  929. Kuznetsov V.P. Smolin I.Yu. Dmitriev A.I. Konovalov D.I. Makarov A.V. et al. Finite Element Simulation of Nanostructuring Burnishing // Physical Mesomechanics. 2013. Vol. 16. – № 1. P. 62-72.

  930. Gorkunov E.S. Subachev Yu.V. Povolotskaya A.M. Zadvorkin S.M. The Influenece of an Elastic Unuaxial Deformation of a Medium-Carbon Steel on the Its Magnetostriction in the Longitudinal and Transverse Directions // Russian Journal of Non-Ferrous Metals. 2013. Vol. 49. – №10. P. 584-594.

  931. Zakharov V.A. Ul'yanov A.I. Gorkunov E.S. Coercive-force hysteresis of carbon steels during elastic cyclic tensile deformation // Russian Journal of Nondestructive Testing. 2013. Vol. 49. – № 5. P. 260-269.

  932. Makarov A.V. Gorkunov E.S. Taratorkin A.I. Kogan L.Kh. Yurovskikh A.S. Kolobyilin Yu.M. Malyigina I.Yu. Davydova (Pozdejeva) N.A. The Influence of a Combined Strain–Heat Treatment on the Features of Electromagnetic Testing of Fatigue Degradation of Quenched Constructional Steel // Russian Journal of Nondestructive Testing. 2013. Vol. 49. – № 12. P. 690-704.

  933. Barashkova E.A. Emelyanov I.G. Determination of the Stress State of Shells under Local Load // MATHEMATICAL METHODS and OPTIMIZATION TECHNIQUES in ENGINEERING. Proceedings of the 1st International Conference on Optimization Techniques in Engineering (OTENG '13), Antalya, Turkey, October 8-10. 2013. P. 109-113.

  934. Mitropolskaya S.Yu. Gervasyev M.A. Standardization of Advanced Materials and Test Methods (in Russian);(a textbook for students). Yekaterinburg, 2013. 100 p.

  935. Kolmogorov V.L. Johnson W. Reid S.R. Corbett G.G. Impact Loading and Fracture of Solids: a Review and a New Theory. 2012.
    Full text>>

  936. Vandyshev A.B. Kulikov V.A. Extraction of extra pure hydrogen from methan steam conversion products in membrane equipment, combined simultaneously with two CO and CH4 conversion catalysts // Chemical and Petroleum Engineering. 2012. Vol. 47, No 11-12 (march). P. 831-836.

  937. Koroleva (Chekhomova) L.F. L.F. Larionov L. P.  Gorbunova N.P. Biomaterial Based on Doped Calcium Carbonate-Phosphate for Active Osteogenesis // Journal of Biomaterials and Nanobiotechnology. 2012. V.3. P. 226-237.

  938. Koroleva (Chekhomova) L.F. Larionov L. P. Gorbunova N.P. Doped Calcium Carbonate-Phosphate Based Biomaterial for Active // Osteogenesis/Edited by: Yunfeng Lin. University Campus STeP Ri, Croatia: InTech, 2012. p.5. P. 117-134.

  939. Koroleva (Chekhomova) L.F. Final polishing of metals to obtain nanoroughened surface // Nanotechnologies in Russia. 2012. V.7, No. 1-2. P. 67-75.

  940. Patselov A. Greenberg B. Gladkovsky S.V. Lavrikov R. Borodin E.M. Layered Metal-Intermetallic Composites in Ti-Al System: Strength under Static and Dynamic Load // AASRI Procedia. 2012. Vol. 3. P. 107-112.

  941. Vladimirov A.P. Dynamic speckle - interferometry of micro-displacements // AIP Conf. Proc. 2012. V. 1457. P. 459-468.

  942. Yana Lizunkova Burov S.V. Thomas Hassel Marten Sebastian Bierbaum Friedich-Wilhelm Bach Temperature control during the APN-process on the steel 1.3343 // Engineering Materials. 2012. Vol. 504-506. P. 1017-1022.

  943. Ivanov M.G. Ivanov D.M. Pavlyishko S.V. Petrov I. Vargas  A. mCguire G. Shenderova O. Nanodiamond-Based Nanolubricants // Fullerenes, Nanotubes and Carbon Nanostructures. 2012. Vol. 20. Issue 4-7. P. 606-610.

  944. Dunyushkina L.A. Smirnova (Yekzemplyarova) E.O. Smirnov S.V. Kuimov V.M. Plaksin S.V. Microstructure, hardness, and electric behavior of Y-doped CaZrO3 films prepared by chemical solution deposition // Ionics. 2012. DOI 10.1007/s11581-012-0769-x.

  945. Makarov A.V. Pozdejeva N.A. Taratorkin A.I. et al. Improvement of wear resistance of quenched structural steel by nanostructuring frictional treatment // Journal of Friction and Wear. 2012. Vol. 33. – Issue: 6. P. 433-442.

  946. Gorkunov E.S. Subachev Yu.V. Zadvorkin S.M. Ulyanov A.I. Goruleva L.S. Effect of Heat Treatment on the Magnetic Behaviour of Powder Steel 50Ni2Mo under Uni-Axial tension // Proc. IMechE. Part C: J. Mechanical Engineering Science. 2012. Vol. 226. Issue 6. P. 1462-1471.

  947. Vladimirov A.P. Dynamic speckle interferometry of the microscopic processes // Proceedings of SPIE. 2012. V. 8413. P. 841305. P. 1-6.

  948. Vladimirov A.P. Druzhinin A.V. Malygin A.S. Mikitas К.N. Theory and calibration of speckle dynamics of phase object // Proceedings of SPIE. 2012. V. 8337. – P. 8337ОС: 1-15.

  949. Gorbunova T.I. Pervova M.G. Trushina E.B. Pavlyishko S.V. Zapevalov A.Ya. Saloutin V.I. A New Application of Derivatives of Polychlorobiphenyls and Polyethylene Glycols // Russian Journal of Applied Chemistry. 2012. Vol. 85. No 10. P. 1632-1636.

  950. Grokhovsky V.I. Gladkovsky S.V. The static and dynamic fracture toughness of Chinga ataxite // Meteoritics & Planetary Science. 2012. 47, А163 IF 2.719.

  951. Gorkunov E.S. Subachev Yu.V. Zadvorkin S.M. et al. Effect of heat treatment and elastoplastic deformation on magnetic properties of 50Ni2Mo powder steel // Physical Mesomechanics. 2012. Vol. 15. – № 1-2. P. 122-132.

  952. Mazunin V.P. Dvoynikov D.A. Improving response in control of adjustable electric drives of mechanisms with elastic links // Russian Electrical Engineering. 2012. Volume 83, No 10. P. 556-561.
    подробнее>>

  953. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. et al. The effect of equal channel angular pressing on the mechanical and magnetic properties of 09 Gamma 2C steel // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 10. P. 568-575.

  954. Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. Magnetic and eddy-current testing of hardened constructional steel subjected to combined strain-thermal treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 12. P. 673-685.

  955. Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. The peculiarities of magnetic and eddy-current testing of quenched structural steel hardened by nanostructuring frictional treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 11. P. 615-622.

  956. Petrova (Kuteneva) S.V. Gladkovsky S.V. Mechanical Properties and Microstructure of Layered Composites Based on Dissimilar Metals and Alloys / Conference Programme (Browsing) // Conference JUNIOR EUROMAT. 2012. 23-27 July, Lausanne, Switzerland [Электронный ресурс]. Режим доступа: http://www.dgm.de/tagungen/.

  957. Barashkova E. Emelyanov I.G. Stress State of Shells under Arbitrary Load // In Proceedings of 5th WSEAS International Conference on Finite Differences - Finite Elements – Finite Volumes - Boundary Elements (F-and-B'12), Prague, Czech Republic, September 24-26. 2012. P. 33-37.

  958. Ivanov M. Ivanov D. Pavlyishko S.V. Koscheev A. Shenderova O. A. Nanodiamond-based Nanolubricants: polyester oil based formulations // MRS Proceedings, 1452, mrss 12-1452-ff08-05, doi:10.1557/opl.2012.1228. 2012. http://journals.cambridge.org/abstract_S1946427412012286.

  959. Mitropolskaya S.Yu. Vichuzhanin D.I. Berezovskaya V.V. Effect of elastoplastic deformation on structure and magnetic properties of high-strength corrosion-resistant austenitic steel of type 03Kh20AG11N7M2 // Metallovedenie i termicheskaya obrabotka metallov. 2011. N2. P. 17-21.

  960. Gorkunov E.S. Magnetoelastic Effect as Applied to Estimating Elastic-Plastic Strains in Steels and Optimization of Technological Processes // Advanced Dynamics and Model-Based Control of Structures and Machines. Springer. Wien. 2011. P. 83-91.

  961. Schennikov V.V. Korobeynikov I.V. Morozova N.V. Golubkova I.A. Ovsyannikov S.V. Misiuk A. Abrosimov N.V. Thermoelectric Power of Compensated Si1-xGex Samples at High Pressure // Journal of Thermoelectricity. 2011. №4. P. 54-58.

  962. Ovsyannikov S.V. Schennikov V.V. Komarovskii I.A. Vorontsov G.V. Korobeynikov I.V. Schennikov V.V. Jr. Electrical and mechanical properties of multiphase systems under external impacts // Proceedings of the SPIE. 2011. Vol. 7978. P. 79781W-1.

  963. Makarov A.V. Schastlivtsev V.M. Tabatchikova T.I. Osinceva A.L. Yakovleva I.L. Egorova L.Yu. Effect of silicon on the wear resistance of high-carbon steels with the structures of isothermal decomposition of austenite during friction and abrasive action // Russian Metallurgy (Metally). 2011. No. 4. P. 296–302.

  964. Stepanova N.N. Mitropolskaya S.Yu. Davidov D.I. Kazantseva N.V. Effect of cold rolling on the magnetic behavior of Ni3Al-based superalloy // Solid State Phenomena. 2011. Vol. 168-169. P. 185-187.

  965. Fedotov V.P. Numerical-Analytical BEM for Elliptic Problems // WSEAS Transactions on Applied and Theoretical Mechanics. 2011. Vol.6. Issue 4.

  966. Mitko Mitko Mihovski Yonka Ivanova Povolotskaya A.M. Stress measurements in materials and construction // Аkustika. 2011. Година XIII. – Брой 13. P. 119-131.

  967. Vandyshev A.B. Kulikov V.A. Evaluation of the efficiency of preparing especially pure hydrogen from methanol and ethanol in membrane equipment, combined with a methane or carbon monoxide conversion catalyst // Chemical and Petroleum Engineering. 2011. Vol. 47, Nos. 7-8. P. 536-544.

  968. Kuznetsov I.A. Dorogina G.A. Gorkunov E.S. Estemirova S.Kh. Selmenskikh N.I. Subachev Yu.V. Pankratov A.A. Effect of Residual Oxides in Co Powder on Properties and Structure of Sintered Powder Materials in Fe-Co System // Inorganic Materials: Applied Research. 2011. V. 2, №3. P. 335-340.

  969. S.V. Grachev O.V. Zhuikov V.P. Grozdovskii E.S. Matsneva Vichuzhanin D.I. Structure and Properties of High-Carbon Steel Cast Pellets // Metal Science and Heat Treatment. 2011. Vol. 53. – Nos 1-2. P. 57-60.

  970. Gervas'ev M.A. Khudorozhkova Yu.V. Filippov M.A. EFFECT OF HARDENING TEMPERATURE ON THE PHASE COMPOSITION AND WEAR RESISTANCE OF ROLL STEELS WITH 5% CR // Metal Science and Heat Treatment. 2011. Т. 52. № 9-10. P. 468-472.

  971. Gorkunov E.S. Mitropolskaya S.Yu. Vichuzhanin D.I. Magnetic method for estimation of load and damage levels in X70 steel // Physical Mesomechanics. 2011. V.14, №1-2.

  972. Gorkunov E.S. Subachev Yu.V. Zadvorkin S.M. Ulyanov A.I. Goruleva L.S. Effect of Heat Treatment on the Magnetic Behaviour of Powder Steel 50Ni2Mo under Uniaxial Tension // DOI: 10.1177/0954406211425758, first published on October 12. 2011.

  973. Gorkunov E.S. Mitropolskaya S.Yu. Groznaya E.M. Osinceva A.L. Mushnikov A.N. Effect of elastoplastic loading on magnetic properties of steel 20 after gas carburasing // Russian Journal of Nondestructive Testing. 2011. No. 4. P. 3–16.

  974. Gorkunov E.S. Zadvorkin S.M. Kokovikhin E.A. Senaeva (Pugacheva) E.I. Subachev Yu.V. Goruleva L.S. Podkorytova A.V. The Effects of Deformations by Rolling and Uniaxial Tension on the Structure and the Magnetic and Mechanical Properties of Armco Iron, Steel 12X18H10T, and a Steel 12X18H10T-Armco Iron-Steel 12X18H10T Composite Material // Russian Journal of Nondestructive Testing. 2011. V. 47, №6. P. 369-380.

  975. Shchennikov V.V. Korobeynikov I.V. Morozova N.V. Veretennikova (Golubkova) I.A. Ovsyannikov S.V. Misiuk A. Abrosimov N.V. THERMOELECTRIC POWER OF COMPENSATED SI1-XGEX SAMPLES AT HIGH PRESSURE // Journal of Thermoelectricity. 2011. № 4. P. 54-58.

  976. Shakirov R.N. The use of error detection and compensation techniques for testing the integer class cBigNumber // Programming and Computer Software. 2010. V. 36, N 1. P. 36-47.
    WoS  in Russian
    подробнее>>
    Full text>>
    Text in SpringerLink>>

  977. Smirnov A.S. Konovalov A.V. Method of Identification of Model of Strain Resistance by Results of Experiments at Compression Samples // In Book of Abstracts of XXXVIII Summer School - Conference “Advanced Problems in Mechanics”, St. Petersburg (Re-pino), July 1-5, 2010. – IPME RAS. 2010. 92 p.

  978. Smirnov A.S. Konovalov A.V. Simulation of Rheology of Plastically Deformable 304 Steel in a Condition Dynamic Recrystallization // In Book of Abstracts of XXXVIII Summer School - Conference “Advanced Problems in Mechanics”, St. Petersburg (Re-pino), July 1-5, 2010. – IPME RAS. 2010. P. 91-92.

  979. Busko V.N. Vengrinovich V.L. Dovgyallo A.G. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. To the problem of non destructive diagnostics of steеl surface layers nano-structured by attrition // Abstr. International Conference ”Optical Techniques and Nano-Tools for Material and Life Sciences ”, Minsk, Belarus, June 15-19, 2010. Minsk, Belarus, 2010. P.1.

  980. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. Kogan L.Kh. Savrai R.A. Eddy current testing of quality of chrome-nickel produced during gas-powder laser cladding and subsequent stabilizing annealing // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 1. 2nd edition. –. M.: Publishing house Spektr, 2010. 108 p.

  981. Gorkunov E.S. Makarov A.V. Zadvorkin S.M. Rashev Ts. Osinceva A.L. Mitropolskaya S.Yu. Savrai R.A. Solov’ev K.E. Testing of phase composition, hardness and wear resistance of high-cromium steels with nitrogen and carbon content by electromagnetic methods // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 266-267.

  982. Makarov A.V. Gorkunov E.S. Kogan L.Kh. Korshunov L.G. Malyigina I.Yu. Osinceva A.L. Kolobyilin Yu.M. Eddy-current testing of laser hardened cemented chrome-nickel steel for drilling bits // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 267-268.

  983. Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of meteorites. Abstracts of 73rd Annual Meeting of the Meteoritical Society, New York, 26-30 July, 2010 // Meteoritics & Planetary Science. 2010. V.45,-P.A.69.

  984. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluation of the life of a shell construction lying on supports // Journal of Machinery Manufacture and Reliability. 2010. V. 39. Is. 1. P. 83-88.

  985. Mitropolskaya S.Yu. Effect of tensile stress on magnetic parameters of austenitic steel with 0.4% N // Voprosy materialovedeniya. 2010. N3(63). P. 33-39.

  986. Vandyshev A.B. Kulikov V.A. Major ways of enhancing efficiency and economy of membrane method of special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2010. Volume 46, Numbers 11-12. P. 726-733.

  987. Vandyshev A.B. Kulikov V.A. Nikishin S.N. Analysis of flow-rate characteristics of high-output membrane equipment for the production of ultra-pure hydrogen // Chemical and Petroleum Engineering. 2010. Volume 46, Numbers 1-2. P. 72-78.

  988. Koroleva (Chekhomova) L.F. Doped nanocrystalline calcium carbonate phosphates // Inorganic Materials. 2010. V.46 No 4. P. 405-411.

  989. Koroleva (Chekhomova) L.F. Synthesis and abrasive properties of nanoparticulate MoO2-modified Al2-xFexO3 and Fe2-yAlyO3 solid solutions // Inorganic Materials. 2010. V.46 No 12. P. 1330-1336.

  990. Vladimirov A.P. Gorkunov E.S. Eremin P.S. Zadvorkin S.M. Shadrin M.V. Solov’ev K.E. A Speckle_Interferometric Setup for Contactless Measurements
    of the Velocity of Rayleigh Ultrasonic Waves // Instruments and Experimental Techniques. Pleiades Publishing, Ltd., 2010. Vol. 53, No. 1. P. 118–121.

  991. Koroleva (Chekhomova) L.F. An Oscillating Mechanism in the Sinthesis of Doped Nanocrystalline Calcium Carbonate Phosphates // Nanotechnologies in Russia. 2010. V.5 No 9-10. P. 635-640.

  992. Mazunin V.P. Dvoynikov D.A. Parameteric limitations in nonlinear control systems of mechanisms with elasticity // Russian Electrical Engineering. 2010. V. 81, N. 5. P. 227-231.
    подробнее>>

  993. Makarov A.V. Taratorkin A.I. Davydova (Pozdejeva) N.A. Smirnov S.V. Vichuzhanin D.I. Korshunov L.G. Malyigina I.Yu. Effect of hardening friction treatment with hard-alloy indenter on microstructure, mechanical properties, and deformation and fracture features of constructional steel under static and cyclic tension // Surface and Coatings Technology. 2010. V. 205 Is. 3. P. 841-852.

  994. Bitkov V.V. Pass Schedule Construction of Bimetallic. Wire Drawing Process with Minimal Strain Inhomogeneity. Part 1: Analytical Study. // Wire & Cable Technology International. 2010. September/October № 5. P. 36-39.

  995. Bitkov V.V. Pass Schedule Construction of Bimetallic. Wire Drawing Process with Minimal Strain Inhomogeneity. Part 2: Experimental Drawing of Bimetallic Wire // Wire & Cable Technology International. 2010. November/December № 6. P. 70-72.

  996. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. Kogan L.Kh. Taratorkin A.I. Eddy current quality control of nickel-chromium coatings forming in the process of gas-powder laser cladding and subsequent stabilizing annealing // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 1.2.23. 2010. 8 p.

  997. Gorkunov E.S. Makarov A.V. Zadvorkin S.M. Rashev Ts. Osinceva A.L. Mitropolskaya S.Yu. Taratorkin A.I. Solov’ev K.E. Electromagnetic testing of phase composition, hardness and wear resistance on nitrogen- and carbon-containing high-cromium steels // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 4.2.13. 2010. 6 p.

  998. Makarov A.V. Gorkunov E.S. Kogan L.Kh. Korshunov L.G. Malyigina I.Yu. Osinceva A.L. Kolobyilin Yu.M. Eddy-current testing of laser hardened cement chromonickel steel for drilling bits // Reports of 10th European Conference on Non-Destructive Testing (CD), Moscow, June 7-11 Электрон. оптич. диск, Статья № 4.2.14. 2010. 11 p.

  999. Konovalov A.V. Constitutive relations for metals under high-temperature plastic strains // Mechanics of Solids, DOI: 10.3103/S0025654409010105. 2009. Vol. 44, No. 1. P. 98–104.

  1000. Efros B. Pilyugin V. Patselov A. Gladkovsky S.V. Efros N. Loladze L. Varyukhin V. Martensitic transitions in nanocrystalline metastable materials // Materials Science and Engineering A 503. 2009. 114–117.

| Forward >>