Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Structural and phase transformations in austenitic chromium-nickel steels during nanostructuring frictional treatment // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 1008. 012055. doi: 10.1088/1757-899X/1008/1/012055.
Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. Simulating the rheological behavior of AlMg6/10% SiC metal matrix composite under high-temperature deformation // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033114. doi:10.1088/1757-899X/709/3/033114.
Smirnov S.V. Veretennikova (Golubkova) I.A. Konovalov D.A. Effect of nanosized oxide fillers on the adhesive strength of epoxy lacquer under scratching // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044007. doi:10.1088/1757-899X/709/4/044007.
Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Aleksandrov S.E. Formation of a narrow hard layer in the AlMg6 alloy near the contact surface after extrusion through a conical die // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033115. doi:10.1088/1757-899X/709/3/033115.
Soboleva N.N. Makarov A.V. Nikolaeva E.P. Skorynina P.A. Malyigina I.Yu. Effect of frictional treatment with a dense cubic boron nitride indenter on the micromechanical properties of the NiCrBSi–Cr3C2 // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012050. https://iopscience.iop.org/article/10.1088/1757-899X/966/1/012050.
Soldatkin V.A. Yurkevich A.V. Tereshin A.V. Blagonravov Continuously Variable Transmission: Computational Model of Load Distribution over Elements of Control System // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042020. doi:10.1088/1757-899X/971/4/042020.
Taratorkin A.I. Belevich A.V. Taratorkin I.A. Trusevich I.A. Strategy for optimizing the NVH parameters of the transport vehicle powertrain during its design // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052085. doi:10.1088/1757-899X/971/5/052085.
Taratorkin A.I. Taratorkin I.A. Trusevich I.A. Theoretical and experimental optimization of vibroacoustic parameters of MKSM-800 loader // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022112. doi:10.1088/1757-899X/709/2/022112.
Tereshin A.V. Yurkevich A.V. Soldatkin V.A. The Blagonravov continuously variable transmission: computational model of oscillation generator loading // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042019. doi:10.1088/1757-899X/971/4/042019.
Vyaznikov M.V. Vyaznikov A.M. Increasing the mobility of tracked vehicles during curvilineer motion with partial skidding // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 052080. doi:10.1088/1757-899X/971/5/052080.
Vyaznikov M.V. Vyaznikov A.M. Investigation of loading of the traveling system of track-type tractor // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022109. doi:10.1088/1757-899X/709/2/ 022109.
Vyaznikov M.V. Vyaznikov A.M. Two power split path hydrodynamic drive train of the commercial tractor // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 022110. doi:10.1088/1757-899X/709/2/ 022110.
Yurkevich A.V. Tereshin A.V. Soldatkin V.A. The Blagonravov Continuously Variable Transmission: Importance of Internal Force Functions for Torque Transforming // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 971. 042018. doi:10.1088/1757-899X/971/4/042018.
Zalazinskiy A.G. Kruchkov D.I. Shveikin V.P. Simulation of stress-strain state at the boundaries of a bimetallic composite to determine tear-off resistance // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033016. doi:10.1088/1757-899X/709/3/ 033016.
Zalazinskiy A.G. Shveikin V.P. Titov V.G. The expert system for improving the technological processes of composite manufacturing // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044115. doi:10.1088/1757-899X/709/4/ 044115.
Burmasheva N.V. Prosviryakov E.Yu. On Marangoni shear convective flows of inhomogeneous viscous incompressible fluids in view of the Soret effect // Journal of King Saud University – Science. 2020. Vol. 32. Iss. 8. P. 3364–3371. https://doi.org/10.1016/j.jksus.2020.09.02.
Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.
Gushchina N.V. Makhin'ko F.F. Ovchinnikov V.V. Kaigorodova L.I. Rasposienko D.Yu. Vichuzhanin D.I. Ion irradiation effect (Ar+, E = 20-40 keV) on the mechanical properties and microstructure of aluminum V95 alloy // Journal of Physics: Conference Series. 2020. Vol. 1713. 012018. doi:10.1088/1742-6596/1713/1/012018.
Lookin N.A. Digital image processing systems based on functional-oriented processors with a homogeneous structure // Journal of Physics: Conference Series. 2020. Vol. 1680. 012034. doi:10.1088/1742-6596/1680/1/012034.
Kazakov A.L. Spevak L.F. M.-G. Lee On the Construction of Solutions to a Problem with a Free Boundary for the Nonlinear Heat Equation // Journal of Siberian Federal University - Mathematics & Physics. 2020. Vol. 13. No. 6. P. 694–707. DOI: 10.17516/1997-1397-2020-13-6-694-707. in Russian
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2020. Vol. 8. Iss. 3. P. 431-441. DOI: 10.1007/s42417-019-00183-4.
Savrai R.A. Kogan L.K. Makarov A.V. Soboleva N.N. Features of eddy-current testing of the fatigue degradation of laser clad cobalt-nickel-chromium coating under contact loading // Letters on Materials. 2020. V. 10. Is. 3. P. 315-321. DOI: 10.22226/2410-3535-2020-3-315-321. in Russian
Soboleva N.N. Makarov A.V. Zavarzina E.P. Skorynina P.A. Malyigina I.Yu. Features of frictional treatment of the composite NiCrBSi-Cr3C2 laser clad coating // Letters on Materials. 2020. Vol. 10. No. (4). P. 506-511. https://doi.org/10.22226/2410-3535-2020-4-506-511. in Russian
Alwan H.L. Korobov Yu.S. Soboleva N.N. Prokopyev D.A. Cavitation erosion – corrosion behavior of Fe-Cr steel induced by ultrasonic vibration // Materials Science Forum. 2020. Vol. 98. P. 312-317. https://doi.org/10.4028/www.scientific.net/MSF.989.312.
Polyansky L.I. Babaylov N.A. Loginov Y.N. The Optimal Content of Liquid Glass in the Raw Material Mixtures in the Briquettes Production // Materials Science Forum. 2020. Vol. 989. P. 678-683. https://doi.org/10.4028/www.scientific.net/MSF.989.678.
Gladkovsky S.V. Salikhyanov D.R. Volkov V.P. Avraamov Y.A. Veselova V.E. Rheological Properties and Microstructure of PH1 Stainless Steel Produced by Selective Laser Melting // Materials Science Forum. 2020. Vol. 989. P. 811-815. https://doi.org/10.4028/www.scientific.net/MSF.989.811.
Salikhyanov D.R. Role of Surface Roughness in the Interlayer Boundary Formation during Manufacturing of Clad Metal Composites // Materials Science Forum. 2020. Vol. 989. P. 654-659. https://doi.org/10.4028/www.scientific.net/MSF.989.654.
Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2020. https://doi.org/10.1016/j.matpr.2020.10.039.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. 2020. V. 61. Nos. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1. in Russian
Pugacheva (Vandysheva) N.B. Babaylov N.A. Bykova (Gurchenko) T.M. Loginov Yu.N. The Structure, Phase Composition and Micromechanical Properties of Briquetted Aluminum // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2020. Vol. 22. No. 3. P. 82-94. DOI: 10.17212/1994-6309-2020-22.3-82-94. in Russian
Soboleva N.N. Makarov A.V. Stepchenkov A.K. Malyigina I.Yu. Korobov Yu.S. Influence of thermal effects on the micromechanical properties of the nickel-chromium coating obtained by gas powder laser cladding // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 104–117. DOI: 10.17212/1994-6309-2020-22.2-104-117. (In Russian). in Russian
Savrai R.A. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The structural characteristics and contact loading behavior of gas powder laser clad CoNiCrW coating // Optics and Laser Technology. 2020. V. 126. Art. 106079. P. 1-8. DOI: 10.1016/j.optlastec.2020.106079.
Bogdanova E.A. Veretennikova (Golubkova) I.A. Investigation of sintering features of ceramic materials based on hydroxyapatite and its substituted forms // Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials. 2020. Iss. 12. P. 535-545. DOI: 10.26456/pcascnn/2020.12.535. in Russian
Berezovskaya V.V. Savrai R.A. Maslova O.V. Ovchinnikov V.V. Gushchina N.V. Influence of irradiation with Ar+ ions on the process of the delayed fracture of a maraging steel // Physics of Metals and Metallography. 2020. Vol. 121. No. 3. P. 291-297. DOI: 10.1134/S0031918X20030035. in Russian
Pugacheva (Vandysheva) N.B. Orishich A.M. Cherepanov A.N. Senaeva (Pugacheva) E.I. Trushina E.B. Trushina. Study of the Chemical Composition and Microstructure of AISI 321/Cu/Ta/Ti Welded Joint // Physics of Metals and Metallography. 2020. Vol. 121. No. 11. P. 1112-1118. DOI: 10.1134/S0031918X20110083. in Russian
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Zamaraev L.M. The Effect of Atmosphere Composition on the Mechanism of Destruction of a Boride Coating on the Surface of a Die Steel during Thermal Cycling // Physics of Metals and Metallography. 2020. Vol. 121. No. 6. P. 590-596. DOI: 10.1134/S0031918X20060113. in Russian
Savrai R.A. Skorynina P.A. Makarov A.V. Osinceva A.L. Structure and surface properties of metastable austenitic steel subjected to liquid carburizing at a reduced temperature // Physics of Metals and Metallography. 2020. Vol. 121. No. 1. P. 65-71. DOI: 10.1134/S0031918X20010135. in Russian
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov A.V. Smirnova (Yekzemplyarova) E.O. Effect of modifying dopes on the mechanical properties of epoxy coatings affected by thermocycling // Procedia Structural Integrity. 2020. Vol. 25. P. 209-213. DOI: 10.1016/j.prostr.2020.04.025.
Smirnov S.V. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Pestov A.V. Smirnova (Yekzemplyarova) E.O. The effect of Stress State on the Adhesive Strength of a Glued Sandwich in Shear-Compression Testing // Procedia Structural Integrity. 2020. Vol. 28. P. 234-238. DOI: 10.1016/j.prostr.2020.10.029.
Ershkov S.V. Christianto V. Rachinskaya A. Prosviryakov E.Yu. A Nonlinear Heuristic Model for Estimation of Covid-19 Impact to World Population // Romanian Reports in Physics. 2020. Vol. 72. Article no. 605. WOS: 000562620700016.
Pestov A.V. Osipova V.A. Koryakova O.V. Gorbunova T.I. Smirnov S.V. Veretennikova (Golubkova) I.A. Preparation of a New Material Based on Epoxy Oligomers for Forming Corrosion-Protective Coatings // Russian Journal of Applied Chemistry. 2020. Vol. 93. P. 400-405. DOI: 10.1134/S107042722003012X. in Russian
Konovalov D.A. Veretennikova (Golubkova) I.A. Bykova (Gurchenko) T.M. Michurov N.S. Development of an Approach to Determining the Representative Volume Element of the Al/SiC Metal Matrix Composite Material Fabricated by Squeeze Casting // Russian Metallurgy. 2020. Vol. 2020. No. 7. P. 738–745. DOI: 10.1134/S0036029520070101. in Russian
Gladkovsky S.V. Volkov V.P. Salikhyanov D.R. Veselova V.E. Patselov A.M. Rheological Behavior of a VT23 Alloy during Deformation in a Wide Temperature Range // RUSSIAN METALLURGY (METALLY). 2020. Vol. 2020. No. 10. P. 1147-1150. DOI: 10.1134/S0036029520100079. in Russian
Alwan H.L. Korobov Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Study of Cavitation Erosion-Corrosion Resistance of Thermally Sprayed Ni-Based Coatings Prepared by HVAF Process // Solid State Phenomena. 2020. Vol. 299. P. 893–901. https://doi.org/10.4028/www.scientific.net/SSP.299.893.
Alwan H.L. Korobov Y.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Nikolaeva E.P. Deviatiarov M.S. Cavitation Erosion-Corrosion Resistance of Deposited Austenitic Stainless Steel/E308L-17 Electrode // Solid State Phenomena. 2020. Vol. 299. P. 908–913. https://doi.org/10.4028/www.scientific.net/SSP.299.908.
Krylova S.E. Gladkovsky S.V. Romashkov E.V. Conceptual approach to development, structure formation and hardening micro-alloyed by steels for the metallurgical tool // Solid State Phenomena. 2020. Vol. 299. P. 658–663. https://doi.org/10.4028/www.scientific.net/SSP.299.658.
Mironov V.I. Ogorelkov D. A. Lukashuk O.A. Analysis of Fatigue Damage Accumulation in Structural Materials under Quasi-Random Load // Solid State Phenomena. 2020. Vol. 299. P. 1178–1183. https://doi.org/10.4028/www.scientific.net/ssp.299.1178.
Kazakov A.L. Spevak L.F. Nefedova O.A. Lempert Anna On the Analytical and Numerical Study of a Two-Dimensional Nonlinear Heat Equation with a Source Term // Symmetry-Basel. 2020. Vol. 12. Iss. 6. article 921. https://doi.org/10.3390/sym12060921.
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Alexandrov S. A New Experimental Method for Determining the Thickness of Thin Surface Layers of Intensive Plastic Deformation Using Electron Backscatter Diffraction Data // Symmetry-Basel. 2020. ol. 12. Iss. 4. article 677. DOI: 10.3390/sym12040677.
Burmasheva N.V. Prosviryakov E.Yu. Exact solution of Navier–Stokes equations describing spatially inhomogeneous flows of a rotating fluid // Trudy Instituta Matematiki i Mekhaniki URO RAN. 2020. Vol. 26. No. 2. P. 79–87. DOI: 10.21538/0134-4889-2020-26-2-79-87. in Russian
Prosviryakov E.Yu. Exact solutions to generalized plane Beltrami–Trkal and Ballabh flows // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol. 24. No. 2. P. 319-330. DOI: https://doi.org/10.14498/vsgtu1766. in Russian
Struzhanov V.V. Integro-differential equations of the second boundary value problem of linear elasticity theory. Communication 2. Inhomogeneous anisotropic body // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 1. P. 199-208. DOI: 10.14498/vsgtu1730. in Russian
Struzhanov V.V. Korkin A.V. On the solution of one problem of deformation of rod systems that does not satisfy the Hadamard conditions by the simple iteration method // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 595-603. https://doi.org/10.14498/vsgtu1787. in Russian
Klimova O.V. Decomposition Approach to the Construction of Parallel Algorithms for Processing of Two-Dimensional Data // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2020. No. 52. P. 114-122. DOI: 10.17223/19988605/52/14. in Russian
Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part II. Stage of Concentrated Strain // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 464-468. https://doi.org/10.1007/s11041-020-00585-2. in Russian
Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part I. Yield Plateau and the Stage of Strain Hardening // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 457-463. https://doi.org/10.1007/s11041-020-00584-3. in Russian
Makarov A.V. Savrai R.A. Skorynina P.A. Volkova E.G. Development of methods for steel surface deformation nanostructuring // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 1-2. P. 61-69. DOI: 10.1007/s11041-020-00513-4. in Russian
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of friction treatment on the structure, micromechanical and tribological properties of austenitic steel 03Kh16N14M3T // Metal Science and Heat Treatment. – 2020. – V. 61. – Nos. 11-12. – P. 764-768. – DOI: 10.1007/s11041-020-00497-1 // Metal Science and Heat Treatment. 2020. V. 61. No. 11-12. P. 764-768. DOI: 10.1007/s11041-020-00497-1.
Gorkunov E.S. Zadvorkin S.M. Khudorozhkova Yu.V. Korzunin G.S. Effect of the Crystallographic Texture Type on the Anisotropy of the Magnetic Leakage Field Parameters of Steel Sheets // Physical Mesomechanics. 2020. Vol. 23. Iss. 3. P. 246-255. https://doi.org/10.1134/S1029959920030091.
Kharanzhevskiy E.V. Ipatov A.G. Krivilyov M.D. Makarov A.V. Gil'mutdinov F.Z. Volkova E.G. Ultralow friction behaviour of B4C-BN-MeO composite ceramic coatings deposited on steel // Surface and Coatings Technology. 2020. V. 390. Art. 125664. DOI: 10.1016/j.surfcoat.2020.125664.
Zhidkov I.S. Kukharenko A.I. Makarov A.V. Savrai R.A. Gavrilov N.V. Cholakh S.O. Kurmaev E.Z. XPS characterization of surface layers of stainless steel nitrided in electron beam plasma at low temperature // Surface and Coatings Technology. 2020. V. 386. Art. 125492. DOI: 10.1016/j.surfcoat.2020.125492.
Zimogliadova T.A. Bushueva E.G. Shtertser A.A. Grinberg B.E. Soboleva N.N. Kollmannsberger E. Chakin I.K. Bibko D.S. Leonov A.V. Safarova D.E. Structure features and wear resistance of layers, formed by Ni-based self-fluxing alloy combined with boron by electron beam, revealed in the air atmosphere // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 2. P. 89–103. DOI: 10.17212/1994-6309-2020-22.2-89-103. (In Russian). in Russian
Kruchkov D.I. Nesterenko A.V. A review of experimental studies of creep behavior and superplasticity in a discontinuous SiC aluminum-matrix composites // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 1. P. 130–157. DOI: 10.17212/1994-6309-2020-22.2-130-157. (In Russian). in Russian
Burmasheva N.V. Prosviryakov E.Yu. Convective layered flows of a vertically whirling viscous incompressible fluid. Temperature field investigation // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 528-541. DOI: 10.14498/vsgtu1770. in Russian
Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // Advances in Intelligent Systems and Computing. 2020. Vol. 1115. P. 340-348. https://doi.org/10.1007/978-3-030-37916-2_33.
Babaylov N.A. Loginov Y.N. Polyanskiy L.I. Determination of the Angle of Bite during Roll Briquetting of Finely Dispersed Materials // Chernye metally. 2020. Iss. 2. P. 52-56. 2-s2.0-85081616613. in Russian
Deryabin S.L. Kiryanova A.S. Construction of two-dimensional flows in physical space arising after the decay of a special discontinuity // Computational Technologies. 2020. Vol. 25. No. 4. P. 4-19. DOI: 10.25743/ICT.2020.25.4.002. in Russian
Kharanzhevskiy E. Ipatov A. Krivilyov M. Makarov A.V. Model experiment on reactive phase formation and solidi cation of B4C-BN composites via nanosecond pulse laser processing // European Physical Journal: Special Topics. 2020. Vol. 229. P. 217-224. https://doi.org/10.1140/epjst/e2019-900076-1.
Volkov V.P. Salikhyanov D.R. Kamantsev I.S. Development and Investigation of the Forging Method of Long-Length Blanks with Mutual Displacement of Anvils // Journal of Chemical Technology and Metallurgy. 2020. Vol. 55. Iss. 3. 571 p. 2-s2.0-85086125773.
Anakhov S.V. Guzanov B.N. Matushkin A.V. Pugacheva (Vandysheva) N.B. Pykin Yu.A. Influence of Plasma Torch Design on Cutting Quality during Precision Air-Plasma Cutting of Metal // Steel in Translation. 2020. Vol. 50. No. 3. P. 159–165. DOI: 10.3103/S096709122003002X. in Russian
Lepikhin S.V. Gladkovsky S.V. Granovskii O.G. The Influence of Low-Temperature Restorative Heat Treatment on the Structure and Mechanical Properties of Boiler Drum Metal after Long-Term Operation // Thermal Engineering. 2020. Vol. 67. No. 2. P. 138–144. DOI: 10.1134/S0040601520020020. in Russian
Gorkunov E.S. Mushnikov A.N. Magnetic Methods of Evaluating Elastic Stresses in Ferromagnetic Steels (Review) // Kontrol’. Diagnostika. 2020. Vol. 23. No. 12. P. 4-23. doi: 10.14489/td.2020.12.pp.004-023. in Russian
Burmasheva N.V. Prosviryakov E.Yu. Exact solution for stable convective concentration flows of a couette type // Vychislitel'naya mehanika sploshnyh sred. 2020. Vol. 13. No. 3. P. 337-349. DOI: 10.7242/1999-6691/2020.13.3.27. in Russian
Lookin N.A. Reconfigurable Systolic 2D-Arrays of Bit-Level Processor Elements for High Speed Data Processing in Embedded Computer Systems. In: Kumkov S., Shabunin S., Syngellakis S. (eds) Advances in Information Technologies, Telecommunication, and Radioelectronics. Innovation and Discovery in Russian Science and Engineering. Publisher Name: Springer, Cham. – Springer Nature Switzerland AG., 2020. Р. 29-40. Print ISBN: 978-3-030-37513-3. – Online ISBN: 978-3-030-37514-0. – DOI: https://doi.org/10.1007/978-3-030-37514-0_3.
Emelyanov I.G. Mironov V.I. Ogorelkov D. A. Calculation of Tank Car under Quasirandom Cyclic Loading // In Book “VIII International Scientific Siberian Transport Forum. TransSiberia 2019. Advances in Intelligent Systems and Computing”. Chapter No. 33. Chapter title “Calculation of Tank Car under Quasirandom Cyclic Loading”. 2020. Vol.1115. https://doi.org/10.1007/978-3-030-37916-2_33. – 2020. – Springer Nature Switzerland AG. (Springer, Cham). – Popovic Z., Manakov A., Breskich V. (Eds). – Print ISBN: 978-3-030-37915-5. – Online ISBN: 978-3-030-37916-2.
Burmasheva N.V. Prosviryakov E.Yu. An Exact Solution for Describing the Unidirectional Marangoni Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition. Temperature Field Investigation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 1. P. 6-23. DOI: 10.17804/2410-9908.2020.1.006-023.
Burmasheva N.V. Prosviryakov E.Yu. Isothermal Layered Flows of a Viscous Incompressible Fluid with Spatial Acceleration in the Case of Three Coriolis Parameters [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 29-46. DOI: 10.17804/2410-9908.2020.3.029-046.
Burmasheva N.V. Prosviryakov E.Yu. Studying the Stratification of Hydrodynamic Fields for Laminar Flows of Vertically Swirling Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 62-78. DOI: 10.17804/2410-9908.2020.4.062-078.
Gladkovsky S.V. Nedzvetsky P.D. Vichuzhanin D.I. Petrova (Kuteneva) S.V. Lepikhin S.V. Brittle Fracture Resistance and Damping Properties of a Steel-Rubber Metal-Polymer Composite [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 6-18. DOI: 10.17804/2410-9908.2020.2.006-018.
Kamantsev I.S. Loginov Yu.N. Belikov S.V. Stepanov S.I. Karabanalov M.S. Golodnov A.I. Fracture Behavior of Cellular Structures Obtained by Selective Laser Melting [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 35-47. DOI: 10.17804/2410-9908.2020.4.035-047.
Kazakov A.L. Spevak L.F. Spevak E.L. On Numerical Methods for Constructing Benchmark Solutions to a Nonlinear Heat Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 26-44. DOI: 10.17804/2410-9908.2020.5.026-044.
Koroleva (Chekhomova) L.F. Larionov L.P. Dobrinskaya M.N. Implants and Bone Technology with the Use of Doped Calcium Carbonate-Phosphates [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 6. P. 54-61. DOI: 10.17804/2410-9908.2020.6.054-061.
Lookin N.A. Rubin L.S. A Precision Low-Frequency Analog-to-Digital Converter for Advanced Systems of Technical Diagnostics and Nondestructive Testing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 6-16. DOI: 10.17804/2410-9908.2020.5.006-016.
Smirnov A.S. Konovalov A.V. Kanakin V.S. Neural Network Modeling of the Rheology of the Almg6 Alloy under the Dispersoid Barrier Effect and the Inhibition of Dynamic Relaxation Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 6. P. 10-26. DOI: 10.17804/2410-9908.2020.6.010-026.
Struzhanov V.V. Chaikin A.E. Determining the Moment of Destruction of Protective Coatings on Pipes and Spherical Vessels [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 6-18. DOI: 10.17804/2410-9908.2020.3.006-018.
Vandyshev A.B. A Systematic Analysis of the Parameters of Disk-Type Membrane-Catalytic Devices for Producing High-Purity Hydrogen from Methane and Diesel Fuel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 4. P. 6-27. DOI: 10.17804/2410-9908.2020.4.06-27.
Mironov V.I. Emelyanov I.G. Vichuzhanin D.I. Zamaraev L.M. Ogorelkov D. A. Yakovlev V.V. Effect of Hydrogenation Temperature and Tensile Stress on the Parameters of the Complete Deformation Diagram for Steel 09G2S [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures.. 2020. Iss. 1. P. 24-33. DOI: 10.17804/2410-9908.2020.1.024-033.
Anakhov S.V. Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Matyshkin A.V. The Influence of the Constructive Features of the Plasmotron on the Quality of the Cut During Air-Plasma Cutting of Sheet Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 58-69. DOI: 10.17804/2410-9908.2020.5.058-069.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for Describing a Unidirectional Marangoni Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition. Pressure Field Investigation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 61-75. DOI: 10.17804/2410-9908.2020.2.061-075.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. A Study of Boriding Methods, An Analysis of the Structure and Properties of the Obtained Coatings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. Iss. 2, 2020. P. 38-60. DOI: 10.17804/2410-9908.2020.2.038-060.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. The Effect of Initial Stress-Strain States on the Magnetic Behaviour of 08G2B Hot-Rolled Steel under Elastic Uniaxial Tension // International Journal "NDT Days. 2020. Vol. III. Iss. 1. P. 26-35.
Gorkunov E.S. Mitko Mihovski Mushnikov A.N. Estimation of Mechanical Stresses in Steels Using Electromagnetic Methods // International Journal "NDT Days" // International Journal "NDT Days". 2020. Vol. III. Iss. 1. P. 6-25.
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Dynamic loading of friction disks in automotive transmissions // MATEC Web of Conferences. 2020. Vol. 317. 02002. https://doi.org/10.1051/matecconf/202031702002.
Burmasheva N.V. Prosviryakov E.Yu. Unidirectional Marangoni–Poiseuille Flows of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2019. Vol. 2176. 030021. – https://doi.org/10.1063/1.5135145.
Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9 No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
Khotinov V.A. Polukhina O.N. Vichuzhanin D.I. Schapov G.V. Farber V.M. Study of Luders Deformation in Ultrafine Low-Carbon Steel by the Digital Image Correlation Technique / Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-328-333. in Russian
Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Zadvorkin S.M. Putilova E. A. Kamantsev I.S. Effect of Steplike Plastic Deformation on the Mechanical Properties and the Fracture of the Bimetal Produced by Exposition Welding / Russian Metallurgy (Metally). 2019. Vol. 2019. No. 5. P. 556–564. DOI: 10.1134/S0036029519050124. in Russian
Kazakov A.L. Nefedova O.A. Spevak L.F. Solution of the Problem of Initiating the Heat Wave for a Nonlinear Heat Conduction Equation Using the Boundary Element Method // Computational Mathematics and Mathematical Physics. 2019. Vol. 59. No. 6. P. 1015-1029. DOI: 10.1134/S0965542519060083. in Russian
Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solutions of Aluminum and Iron Oxides // Inorganic Materials. 2019. Vol. 55. No. 6. P. 556-562. DOI: 10.1134/S0020168519060074.. in Russian
