<< Васк | | Forward >>
  1. Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
    Scopus 

  2. Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
    Scopus 

  3. Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
    Scopus 

  4. Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
    Scopus 

  5. Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
    Scopus 

  6. Vladimirov A.P. Ponosov Yu.S. Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue // PNRPU Mechanics Bulletin. 2018. No. 3. P. 138-146. DOI: 10.15593/perm.mech/2018.3.13.
    Scopus 

  7. Privalova V.V. Prosviryakov E.Yu. Steady convective Coutte flow for quadratic heating of the lower boundary fluid layer // Rus. J. Nonlin. Dyn. 2018. Vol. 14. No. 1. P. 69-79.
    Scopus 

  8. Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
    Scopus 

  9. Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
    Scopus 

  10. Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
    РИНЦ 

  11. Druzhinin A.V. Vladimirov A.P. Tsvetkova E.V. Teoretical Bases of Magnetooptical Refractometry for Transparent Media [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 83-89. DOI: 10.17804/2410-9908.2018.6.083-089.
    РИНЦ 

  12. Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
    РИНЦ 

  13. Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
    РИНЦ 

  14. Muizemnek O.Yu. Konovalov A.V. Kanyukov S.I. Computer-Aided Intersubjective Assignment of Overlaps for Shaft-Type Forgings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 14-23. DOI: 10.17804/2410-9908.2018.3.014-023.
    РИНЦ 

  15. Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
    РИНЦ 

  16. Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
    РИНЦ 

  17. Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
    РИНЦ 

  18. Privalova V.V. Prosviryakov E.Yu. Exact Solutions for a Couette–Hiemenz Creeping Convective Flow with Linear Temperature Distribution on the Upper Boundary [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 92-109. DOI: 10.17804/2410-9908.2018.2.092-109.
    РИНЦ 

  19. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
    РИНЦ 

  20. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Mushnikov A.N. Studying the Effect of Plastic Deformation on the Mechanical and Magnetic Characteristics of High-Strength Bimetal Materials Intended for Use in the Arctic Climate [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. ss. 6. P. 136-14. DOI: 10.17804/2410-9908.2018.6.136-148.
    РИНЦ 

  21. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
    РИНЦ 

  22. Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
    РИНЦ 

  23. Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
    РИНЦ 

  24. Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
    РИНЦ 

  25. Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
    РИНЦ 

  26. Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
    РИНЦ 

  27. Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
    РИНЦ 

  28. Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
    РИНЦ 

  29. Rozhkova E.A. Gorshkov A.V. Prosviryakov E.Yu. Layered Marangoni Convection during Heat Transfer According to the Newton’s Law of Cooling. Part 1. Investigation of the Velocity Field // Khimicheskaya fizika i mezoskopiya. 2018. Vol. 20. No. 1. P. 15-27. DOI:10.20537/nd1801007.
    РИНЦ 

  30. Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
    РИНЦ 

  31. Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
    РИНЦ 

  32. Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
    РИНЦ 

  33. Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
    РИНЦ 

  34. Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
    РИНЦ 

  35. Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
    РИНЦ 

  36. Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
    РИНЦ 

  37. Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
    РИНЦ 

  38. Mushnikov A.N. Kryucheva K. Modeling of Magnetic Hysteresis under Weak Magnetic Fields and Triaxial Stress State // International Scientific Journal “Mathematical Modeling”. 2018. Year II. – Issue 3. P. 102-104.

  39. Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.

  40. Loginov Yu.N. Babaylov N.A. Polyanskii L.I. Effect of the Precompaction Pressure on the Density Distribution in a Metallurgical Briquette during Roller Pressing // Metallurgist. 2017. Vol. 61. No. 9-10. P. 849-852. DOI 10.1007/s11015-018-0574-5.
    WoS  Scopus 

  41. Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
    WoS  Scopus 

  42. Gorkunov E.S. Димитров Р.З. Миховски М.М. Магнитна дефектоскопия, структуроскопия, фазометрия / Национально научно-техническо дружество по дефектоскопия. Болгария, София, 2017. 241 p. ISBN: 978-619-90662-1-8.

  43. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Subachev Yu.V. Peculiarities of the Magnetic Behavior of Pipe Steels with Different Initial Stress-Strain States under Elastic Deformation // Dynamics and Control of Advanced Structures and Machines. – Chapter 17. – P. 153-160. – DOI 10.1007/978-3-319-43080-5_17. – ISBN 978-3-319-43079-9 ISBN 978-3-319-43080-5 (eBook). – Publisher: Springer International Publishing Switzerland 2017. – Editors: Alexander K. Belyaev, Hans Irschik, Michael Kromme. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.). 2017. 235 p.
    Full text>>

  44. Vladimirov A.P. Alexey A. Bakharev Dynamic Speckle Interferometry of Thin Biological Objects: Theory, Experiments and Practical Perspectives // Optical Interferometry. – Chapter 6. – P. 103-141. – http://dx.doi.org/chapter/10.5772/66712. – http://dx.doi.org/chapter/10.5772/63683. – Publisher: INTECH, 2017. – Edited by Alexander A. Banishev, Mithun Bhowmick and Jue Wang. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.), Print ISBN: 978-953-51-2955-4. Online ISBN: 978-953-51-2956-1. 2017. 249 p.

  45. Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped calcium carbonate-phosphate used for bone tissue technology // Integrative Clinical Medicine, ISSN: 2515-0219, doi: 10.15761/ICM.1000108. 2017. V. 1(2). P. 1-7.

  46. Polyakov P.A. A.V. Dolmatov Kolmyikov V.L. O.V. Romanova M.N. Zakharov Effect of Sintering on the Strength of Iron-Based Powder Composites [Electronic resource] – DOI: 10.17804/2410-9908.2017.1.013-023. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 13-23.

  47. Yu.N. Saraev Gladkovsky S.V. S.V. Lepkhin Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of Welding Technology on Structure, Mechanical Properties and Fracture Toughness of 09G2S Steel Welded Joints [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. –DOI: 10.17804/2410-9908.2017.5.023-042. 2017. Iss. 5. P. 23-42.

  48. Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.

  49. Aleksandr Blokhin Arcadiy Nedyalkov Lev Barakhatov Taratorkin A.I. Abram Kropp Multistage Mechanical Transmissions with Automatic Control for Advanced Trucks and Buses . – DOI 10.1515/ama-2017-0040 // Acta Mechanica et Automatica. 2017. Vol. 11. – No. 4. P. 260-266.

  50. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.

  51. Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004.
    Full text>>

  52. Yu.N. Loginov A.E. Pervukhin Babaylov N.A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing // AIP Conf. Proc. 2017. Vol. 1915. – 040032.
    Full text>>

  53. E.N. Shipacheva A.A. Petunin Berezin I.M. A Genetic Algorithm Used for Solving One Optimization Problem // AIP Conf. Proc. 2017. Vol. 1915. – 040052.
    Full text>>

  54. Yu.N. Loginov Babaylov N.A. L.I. Polyansky The Properties of Coke Breeze Briquettes Produced by Ram Briquetting // AIP Conf. Proc. 2017. Vol. 1915. – 040034.
    Full text>>

  55. Yu.N. Saraev Gladkovsky S.V. Lepikhin S.V. Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of the Welding Method on the Impact Strength and Cyclic Fracture Toughness Parameters of the 09G2S Steel // AIP Conf. Proc. 2017. Vol. 1915. – 030024.
    Full text>>

  56. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Mathematical Modeling of Hydromechanical Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 040001.
    Full text>>

  57. Belozerov G. A. Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. A.V. Perminova Effect of Strain Rate on the Formation of the Microstructure of a 1950/10% SiC Metal Matrix Composite under High Temperature // AIP Conf. Proc. 2017. Vol. 1915. – 030002.
    Full text>>

  58. Berezin I.M. Polyakov A.P. Polyakov P.A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 030003.
    Full text>>

  59. Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for the Layered Convection of a Viscous Incompressible Fluid at Specified Temperature Gradients and Tangential Forces on the Free Boundary // AIP Conf. Proc. 2017. Vol. 1915. – 040005.
    Full text>>

  60. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011.
    Full text>>

  61. Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Veselova V.E. M.A. Ryzhkov The Thermal Expansion and Thermophysical Properties of an Aluminum and Al/B4C composite // AIP Conf. Proc. 2017. Vol. 1915. – 030005.
    Full text>>

  62. Gorkunov E.S. Evaluating Structural and Phase Changes in Individual Layers of Multilayer Products with the use of Differential Magnetic Permeability // AIP Conf. Proc. 2017. Vol. 1915. – 020002.
    Full text>>

  63. Gorkunov E.S. E.I. Yakushenko Zadvorkin S.M. Mushnikov A.N. Analytical Description of Changes in the Magnetic States of Chromium-Nickel Steel under Uniaxial Elastic Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 040018.
    Full text>>

  64. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Differential Evaluation of the Magnetic State of Wire Packages // AIP Conf. Proc. 2017. Vol. 1915. – 040017.
    Full text>>

  65. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Specific Features of the Determination of Residual Stresses in Materials by Diffraction Techniques // AIP Conf. Proc. 2017. Vol. 1915. – 030006.
    Full text>>

  66. Gorshkov A.V. Prosviryakov E.Yu. Complex Large-Scale Convection of a Viscous Incompressible Fluid with Heat Exchange According to Newton’s Law // AIP Conf. Proc. 2017. Vol. 1915. – 040019.
    Full text>>

  67. Gorshkov A.V. Prosviryakov E.Yu. Convective Flow in the Solid Rotation of a Viscous Incompressible Fluid // AIP Conf. Proc. 2017. Vol. 1915. – 040020.
    Full text>>

  68. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Intersubjective Decision-Making for Computer-Aided Forging Technology Design // AIP Conf. Proc. 2017. Vol. 1915. – 040022.
    Full text>>

  69. Kazakov A.L. A.A. Lempert P.A. Kuznetsov On the Analytic Solvability of a Special Boundary Value Problem for the Nonlinear Heat Equation // AIP Conf. Proc. 2017. Vol. 1915. – 020003.
    Full text>>

  70. Khalevitskiy Yu.V. Konovalov A.V. Burmasheva N.V. Partin A.S. Linear Solver Performance in Elastoplastic Problem Solution on GPU Cluster // AIP Conf. Proc. 2017. Vol. 1915. – 040023.
    Full text>>

  71. Koroleva (Chekhomova) L.F. Abrasive Properties of Modified Oxides for Finish Polishing of Steel // AIP Conf. Proc. 2017. Vol. 1915. – 040027.
    Full text>>

  72. Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029.
    Full text>>

  73. Makarov A.V. G.V. Samoylova N.V. Gavrilov A.S. Mamayev Osinceva A.L. T.E. Kurennykh Savrai R.A. Effect of Preliminary Nanostructuring Frictional Treatment on the Efficiency of Nitriding of Metastable Austenitic Steel in Electron Beam Plasma // AIP Conf. Proc. 2017. Vol. 1915. – 030011.
    Full text>>

  74. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2017. Vol. 1915. – 030012.
    Full text>>

  75. Mironov V.I. O.A. Lukashuk D.A. Ogorelkov Estimation of Metallic Structure Durability for a Known Law of Stress Variation // AIP Conf. Proc. 2017. Vol. 1915. – 040039.
    Full text>>

  76. Prosviryakov E.Yu. Waves of Pressure in Viscous Incompressible Fluid // AIP Conf. Proc. 2017. Vol. 1915. – 020006.
    Full text>>

  77. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Layered Thermocapillary Convection of a Viscous Incompressible Fluid with Specified Stresses on the Bottom // AIP Conf. Proc. 2017. Vol. 1915. – 030019.
    Full text>>

  78. Prosviryakov E.Yu. Spevak L.F. Simulation of a Viscous Flow in Layered Composites in View of the Thermocapillary Effect // AIP Conf. Proc. 2017. Vol. 1915. – 040047.
    Full text>>

  79. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Michurov N.S. Senaeva (Pugacheva) E.I. Cheremicina E.R. Effect of the Content of SiC on the Structure and Properties of D16 alloy matrix composites // AIP Conf. Proc. 2017. Vol. 1915. – 030021.
    Full text>>

  80. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020.
    Full text>>

  81. Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050.
    Full text>>

  82. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049.
    Full text>>

  83. Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008.
    Full text>>

  84. Solovei V.D. Kolmogorov V.L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory // AIP Conf. Proc. 2017. Vol. 1915. – 040053.
    Full text>>

  85. Spevak L.F. Kazakov A.L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040054.
    Full text>>

  86. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Nonzero Boundary Conditions by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040055.
    Full text>>

  87. Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028.
    Full text>>

  88. Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062.
    Full text>>

  89. Zalazinskaya E.A. Zalazinskiy A.G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body // AIP Conf. Proc. 2017. Vol. 1915. – 040067.
    Full text>>

  90. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068.
    Full text>>

  91. Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069.
    Full text>>

  92. A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007.
    Full text>>

  93. Kruchkov D.I. Zalazinskiy A.G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials // AIP Conf. Proc. – 2017. Vol. 1915. – 040028.
    Full text>>

  94. Kuznetsov A.V. Kamantsev I.S. Zadvorkin S.M. N.A. Drukarenko Goruleva L.S. Veselova V.E. Evaluating the Damage of Steel 09G2S under Static and Cyclic Loading with Regard for the Level of Residual Stresses in the Metal // AIP Conf. Proc. – 2017. Vol. 1915. – 040030.
    Full text>>

  95. Ogorelkov D. A. Kamantsev I.S. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conf. Proc. – 2017. Vol. 1915. – 040010.
    Full text>>

  96. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022.
    Full text>>

  97. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026.
    Full text>>

  98. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Methods for Predicting Dynamic Loading of Friction Disks // AIP Conf. Proc. – 2017. Vol. 1915. – 040060.
    Full text>>

  99. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  100. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

<< Васк | | Forward >>